Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Rally 1/16 VXL / Traxxas 7335 Bumper/Mount Front
-10%

Traxxas 7335 Bumper/Mount Front

Art.nr: TRX 7335

89,-

99,-

- 10%
Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Front Bumper and Mount for the Traxxas 1/16 scale Rally VXL.


FEATURES: Black plastic construction


INCLUDES: 1 Mount and 1 Bumper


REQUIRES: Installation onto the 1/16 Rally chassis

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 7095 Transmission Pro-Built 1/16 (not VXL) Hovedbilde Traxxas 7095 Transmission Pro-Built 1/16 (not VXL)
Traxxas 7095 Transmission Pro-Built 1/16 (not VXL)
Traxxas 7095 - Pro-Built 1/16 Brushed Transmission Transmission, complete (fits 1/16-scale brushed models) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: 1/16 E-Revo® (Brushed) 1/16 Slash 4WD (Brushed)

559,-

KJØP
Hovedbilde Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
Hovedbilde Traxxas 7060 Aluminum Motor Mount Finned VXL
Traxxas 7060 Aluminum Motor Mount Finned VXL
This is the Finned Aluminum Motor Mount for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Aluminum construction           Finned for cooling           Silver in color INCLUDES: One Finned Aluminum Motor Mount REQUIRES: Installation on the vehicle SPECS:    Length: 35mm (1.4")           Width: 13mm (0.51")           Height: 30mm (1.2")

99,-

KJØP
Hovedbilde Traxxas 7090 Motor Plate VXL
Traxxas 7090 Motor Plate VXL
This is the Motor Plate for use on the                 Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Aluminum construction           Blue in color INCLUDES: One Motor Plate REQUIRES: Installation on the engine SPECS:    Length: 50mm (2")           Width: 35mm (1.4")           Thickness: 2mm (0.08")

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 7077R Cover Gear/Motor Mount Hinge Post VXL
Traxxas 7077R Cover Gear/Motor Mount Hinge Post VXL
This is the Gear Cover/Motor Mount Hinge for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover/Motor Mount Hinge Post           One 3x8mm Cap Head Screw with Flat and Split Washers           One 3x8mm Button Head Screw REQUIRES: Installation on the vehicle

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...
Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...
These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction           Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm           Thickness: 4.2mm (0.17")  

219,-

KJØP
Hovedbilde Traxxas 7029X Bulkhead Rear Left & Right 3x10mm BCS ...
Traxxas 7029X Bulkhead Rear Left & Right 3x10mm BCS ...
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde Traxxas 7037 Skid Plate Set 1/16 E-Revo/Slash VXL
Traxxas 7037 Skid Plate Set 1/16 E-Revo/Slash VXL
is is the Skid Plate Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Skidplate           One Rear Skidplate           One Transmission Skid Plate           Two Steering Servo Guards           One Steering Servo Cover Plate REQUIRES: Installation on the vehicle

129,-

KJØP
Hovedbilde Protoform 152800 Tornado Rally Cross Clear Body 1/16 ...
Protoform 152800 Tornado Rally Cross Clear Body 1/16 ...
This is the PROTOform Tornado RallyCross 1/16 scale Body. FEATURES:           Constructed of .030" (0.76mm) thick lexan           Made to be used with the Traxxas #7317 wing and 1/16 scale chassis           Two-seater RallyCross hatchback body can be mounted super low yet still maintain tire clearance           Body mount and wing mount locations are dimpled for easy identification INCLUDES:            PROTOform Tornado RallyCross 1/16 scale Body with Window Mask Sheet and Decal Sheet SPECS:              Length: 13.4" (340mm)           Width: 7.3" (185mm)           Height: 4.5" (114mm)           Wheelbase: 8.3" (211mm)       (B6)

240,-

Ikke på lager
Hovedbilde Traxxas Servo 2080A Micro Sealed
Traxxas Servo 2080A Micro Sealed
Traxxas Servo 2080A Micro Sealed Servo, micro, waterproof.   Length: 29,5 mm Height: 29 mm Width: 14 mm Max Voltage: 6,0 V Speed at 6,0V: 0,11 sec/60°

349,-

369,-

KJØP
-5%
Hovedbilde Traxxas 7021 Suspension Pin Set Front/Rear VXL
Traxxas 7021 Suspension Pin Set Front/Rear VXL
This is the Suspension Pin Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction           Silver in color INCLUDES: Two 2x46mm Pins           Four 2x14mm Pins REQUIRES: Installation through suspension components

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 7023 Bulkhead Tie Bars Front/Rear 1/16 VXL
Traxxas 7023 Bulkhead Tie Bars Front/Rear 1/16 VXL
These are the Front and Rear Bulkhead Tie Bars for use on the               Traxxas 1/16 E-Revo ,Summit ,Rally and Slash VXL 4WD Vehicles. FEATURES: Aluminum construction           Blue in color INCLUDES: One Front Bulkhead Tie Bar           One Rear Bulkhead Tie Bar           One 2.5x6mm Cap Head Screw REQUIRES: Installation on the vehicle

69,-

KJØP
Hovedbilde Traxxas 7025 Seal Kit Receiver Box 1/16 VXL
Traxxas 7025 Seal Kit Receiver Box 1/16 VXL
This is the Seal Kit for the Traxxas 1/16 scale Receiver Box                     used in the 1/16 scale E-Revo, Summit, Rally and Slash. FEATURES: Prevents moisture and dirt from entering receiver box INCLUDES: Silicone O-ring           Silicone grease, TRX 1647           Two sections of foam rubber           Instruction sheet REQUIRES: Installation on receiver  

49,-

KJØP
Hovedbilde Traxxas 7022 Chassis, 1/16 E-Revo/Slash/Rally 4WD
Traxxas 7022 Chassis, 1/16 E-Revo/Slash/Rally 4WD
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

Ikke på lager
Hovedbilde Traxxas 7024X Receiver Box
Traxxas 7024X Receiver Box
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles. FEATURES Plastic construction Allows installation and removal of the receiver without losing the watertight seal Wire clamp system allows the use of aftermarket receivers while maintaining the watertight seal INCLUDES Box with Seal, tube of Grease, three Pads, Clamp and Mounting Screws REQUIREMENTS Installing receiver and fastening to chassis

129,-

KJØP
Hovedbilde Absima 2510004 Wheel Set OnRoad 6 Spoke / Profile ...
Absima 2510004 Wheel Set OnRoad 6 Spoke / Profile ...
Absima 2510004 Wheel Set OnRoad 6 Spoke / Profile White 1:10 (4  Wheel set onroad "6 spoke/profile" white Amount: 4 pieces Diameter: 61mm Width: 26mm Wheel hub: 12mm

219,-

249,-

KJØP
-12%
Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
Hovedbilde Traxxas 7015 Front & Rear Body Mounts & Posts 1/16 VXL
Traxxas 7015 Front & Rear Body Mounts & Posts 1/16 VXL
These are the Front and Rear Body Mounts and Posts for use on the                     Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Body Mount           One Rear Body Mount           Two Front Body Posts           Two Rear Body Posts REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde Traxxas 7381 Differential Locker (2)
Traxxas 7381 Differential Locker (2)
 These are the Differential Lockers from Traxxas. FEATURES: Plastic construction INCLUDES: Two Differential Lockers

39,-

KJØP
Hovedbilde Traxxas 7038 Toe Link Fr & Re (4) Hollow Balls 1/16 ...
Traxxas 7038 Toe Link Fr & Re (4) Hollow Balls 1/16 ...
These are the Pushrods for use on the                          Traxxas 1/16 Slash VXL 4WD RTR                           Rally, Mustang, Ken Block Rally and Kyle Busch. FEATURES: Nylon construction           Red in color INCLUDES: Two Front and two Rear Toe Links           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 67mm (2.6")           Diameter: 5mm (0.20")

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 7018 Pushrod 1/16 Slash, Rally VXL
Traxxas 7018 Pushrod 1/16 Slash, Rally VXL
These are the Pushrods for use on the                   Traxxas 1/16 Slash VXL 4WD RTR                   Rally, Mustang, Ken Block Rally and  Kyle Busch  FEATURES: Nylon construction           Red in color INCLUDES: Four Pushrods           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 55mm (2.2")           Diameter: 5.2mm (0.20")

75,-

KJØP
Hovedbilde Traxxas 1815 Body Washers (8)
Traxxas 1815 Body Washers (8)
This is the Traxxas replacement Body Washers. FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm) INCLUDES:  Eight large body mount washers

29,-

Ikke på lager
Hovedbilde Traxxas 7340 Spring/Shock GTR 1/16 Rally
Traxxas 7340 Spring/Shock GTR 1/16 Rally
These are the stock replacement Shock Springs for use on the                  Traxxas 1/16 VXL Rally RTR. FEATURES: Steel construction           White in color           -10% progressive compression, green firmness rating INCLUDES: Two Shock Springs REQUIRES: Installation on the vehicle SPECS:    Length: 18mm (0.70")           Outer Diameter: 14mm (0.55")           Wire Diameter: 1.4mm (0.06")

39,-

KJØP
Hovedbilde Traxxas 7019 Ball Bearings Blue Rubber Sealed 4x8x3mm ...
Traxxas 7019 Ball Bearings Blue Rubber Sealed 4x8x3mm ...
These are the Rubber Sealed Ball Bearings for use on the               Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles. FEATURES: Blue rubber sealed           May also be used in any vehicle where this size bearing is required INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 8mm (0.31")           Inner Diameter: 4mm (0.16")           Width: 3mm (0.12")

49,-

KJØP
Hovedbilde Traxxas 7067 Piston/Damper Rally VXL (4)
Traxxas 7067 Piston/Damper Rally VXL (4)
These are the Shock Pistons and Travel Limiters                          for the Traxxas Rally VXL. FEATURES: Red plastic shock pistons with 2 x.5mm holes           Back plastic travel limiters INCLUDES: Four shock pistons           Four travel limiters REQUIRES: Installation in shocks SPECS:    Thickness:        Piston (.06" / 1.5mm)   Limiter (.16" / 4mm)           Inside Diameter:  Piston (.09" / 2.5mm)   Limiter (.09" / 2.5mm)           Outside Diameter: Piston (.30" / 7.6mm)   Limiter (.19" / 5mm)

29,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png