Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-revo 1/16 VXL 71076-8 / Traxxas 7090 Motor Plate VXL
-17%

Traxxas 7090 Motor Plate VXL

Art.nr: TRX 7090

49,-

59,-

- 17%
Traxxas

Traxxas
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Motor Plate for use on the
                Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles.


FEATURES: Aluminum construction
          Blue in color


INCLUDES: One Motor Plate


REQUIRES: Installation on the engine


SPECS:    Length: 50mm (2")
          Width: 35mm (1.4")
          Thickness: 2mm (0.08")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2534 Countersunk Machine Hex Drive Screws ...
Traxxas 2534 Countersunk Machine Hex Drive Screws ...
This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
Hovedbilde Traxxas 2550 Countersunk Hex Screw 3x8mm (6)
Traxxas 2550 Countersunk Hex Screw 3x8mm (6)
         These are 3x8mm Countersunk Hex Head Screws by Traxxas.               Can be used anywhere this type of screw is needed. FEATURES: Metal Construction           Black in Color           Countersunk INCLUDES: (6) Screws SPECS:    Length:   8mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 7095 Transmission Pro-Built 1/16 (not VXL) Hovedbilde Traxxas 7095 Transmission Pro-Built 1/16 (not VXL)
Traxxas 7095 Transmission Pro-Built 1/16 (not VXL)
Traxxas 7095 - Pro-Built 1/16 Brushed Transmission Transmission, complete (fits 1/16-scale brushed models) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: 1/16 E-Revo® (Brushed) 1/16 Slash 4WD (Brushed)

559,-

KJØP
Hovedbilde Traxxas 7315 Body Mount Rear/Body Mount Posts, Front ...
Traxxas 7315 Body Mount Rear/Body Mount Posts, Front ...
These are the Front and Rear Body Mounts for the                   Traxxas 1/16 scale Rally Racer. FEATURES: Plastic construction INCLUDES: One-piece Rear and two-piece Front Body Mounts REQUIRES: Fastening to chassis and installing body

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 7336 Body Bumper Foam
Traxxas 7336 Body Bumper Foam
This is the Foam Body Bumper for the Traxxas 1/16 Rally VXL. FEATURES: Foam construction           Black in color INCLUDES: One foam body bumper REQUIRES: Installation on to rally car SPECS:    Length: 139mm (5.47")           Width: 43mm (1.69")           Thickness: 14.5mm (0.57")

29,-

KJØP
Hovedbilde Traxxas 7335 Bumper/Mount Front
Traxxas 7335 Bumper/Mount Front
This is the Front Bumper and Mount for the Traxxas 1/16 scale Rally VXL. FEATURES: Black plastic construction INCLUDES: 1 Mount and 1 Bumper REQUIRES: Installation onto the 1/16 Rally chassis

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 7037 Skid Plate Set 1/16 E-Revo/Slash VXL
Traxxas 7037 Skid Plate Set 1/16 E-Revo/Slash VXL
is is the Skid Plate Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Skidplate           One Rear Skidplate           One Transmission Skid Plate           Two Steering Servo Guards           One Steering Servo Cover Plate REQUIRES: Installation on the vehicle

129,-

KJØP
Hovedbilde Traxxas 7029X Bulkhead Rear Left & Right 3x10mm BCS ...
Traxxas 7029X Bulkhead Rear Left & Right 3x10mm BCS ...
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde RPM 73164 Axle Carrier Green Traxxas 1/16
RPM 73164 Axle Carrier Green Traxxas 1/16
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!   

169,-

KJØP
Hovedbilde RPM 73169 Axle Carriers Red 1/16 Revo/Slash
RPM 73169 Axle Carriers Red 1/16 Revo/Slash
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!    

169,-

KJØP
Hovedbilde Traxxas 1726 Antenna Tube Blue Hovedbilde Traxxas 1726 Antenna Tube Blue
Traxxas 1726 Antenna Tube Blue
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
Hovedbilde Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Wheelie Bar           One 2,5x14mm Cap Head Screws           Three 2,5x8mm Cap Head Screws           Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

KJØP
Hovedbilde Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System
Traxxas 3350R Velineon VXL-3s Brushless Power System
Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

KJØP
-13%
Hovedbilde Traxxas 7138X Toe links, aluminum (red-anodized) (4) Hovedbilde Traxxas 7138X Toe links, aluminum (red-anodized) (4)
Traxxas 7138X Toe links, aluminum (red-anodized) (4)
These are the optional Aluminum Toe Links for use on the Traxxas 1/16 scale E-Revo VXL ! These are the strongest toe links you can buy for your 1/16 scale Traxxas model. Traxxas aluminum toe links are manufactured from high-grade 6061-T6 aluminum and anodized bright red, and the beefy size tells everyone your truck means business. The broad center nut makes it easy to line up the wrench for fast, trackside tuning. A handy machined groove on one end easily identifies the left hand threads.   Lightweight aluminum turnbuckles Pre-assembled and ready to install!! Anodized red in color INCLUDES: Four Toe Links Eight Hollow Balls One 5mm Wrench SPECS: Length: 86mm (3.4") Diameter: 5mm (0.2")

379,-

KJØP
Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw
Traxxas 2426 Pinion Gear 48P 26T w/Screw
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)  

39,-

KJØP
Hovedbilde Traxxas 2431 Pinion Gear 48P 31T w/Screw
Traxxas 2431 Pinion Gear 48P 31T w/Screw
This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm)

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Traxxas 7460R Motor Mount Aluminium Rustler 4x4/Slash ...
Traxxas 7460R Motor Mount Aluminium Rustler 4x4/Slash ...
  Motor Mount Aluminium Rustler 4x4/Slash Ultimate

459,-

KJØP
Hovedbilde Traxxas 6790 Fixed Gear Adapters
Traxxas 6790 Fixed Gear Adapters
Fixed Gear Adapters

59,-

KJØP
Hovedbilde Traxxas 3956X Spur gear, steel, 54-tooth
Traxxas 3956X Spur gear, steel, 54-tooth
  Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)

189,-

KJØP
Hovedbilde Traxxas 6893G Bearing Adapter Alu Green with Ball ...
Traxxas 6893G Bearing Adapter Alu Green with Ball ...
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

69,-

KJØP
Hovedbilde Traxxas 4725 Pinion Gear 48P 25T
Traxxas 4725 Pinion Gear 48P 25T
This gear is a steel pinion gear in 48 pitch Features:  Brass pinion gear Includes:  1 gear and 1 set screw Specs:     Steel, 48 pitch, 25 tooth pinion gear.             Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"             Shaft diameter- 1/4"  Gear diameter- 1/2"             Mounting shaft (motor shaft) 1/8"

39,-

Ikke på lager
Hovedbilde Traxxas 7062 GTR Composite Shocks Rebuild Kit VXL
Traxxas 7062 GTR Composite Shocks Rebuild Kit VXL
This is the Traxxas GTR Shock Rebuild Kit. FEATURES: Renews two GTR shocks INCLUDES: Four O-Rings           Two Bladders           Six E-Clips           Four Hollow Balls           Two Shock Rod Ends           Two Pistons           Two Spacers REQUIRES: Installation in shocks

59,-

KJØP
Hovedbilde Traxxas 7065 Caps & Spring Retainers GTR Shock VXL
Traxxas 7065 Caps & Spring Retainers GTR Shock VXL
These are the Caps and Spring Retainers for use on the shocks on the                    Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two Upper Caps           Four Hollow Balls           Two Bottom Caps           Two Upper Retainers           Two Lower Retainers REQUIRES: Installation on the shocks

45,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png