Hopp til innhold

Traxxas 5576 All-Star 2.8" Chrome Wheels (2)

Art.nr: TRX 5576

99,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Rear Chrome Wheels.          


FEATURES: Nylon construction
          Chrome plated
          Five spoke wheel pattern
          Uses 12mm hex adapter


INCLUDES: Two Rear Chrome Wheels


REQUIRES: Assembly onto Vehicle


SPECS:    Outer Diameter: 3.08" (78.3mm)
          Width: 1.91" (48.6mm)
          Bead Diameter: 2.83" (72mm)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5563
Copied
       This is a pair of Front Shredder Tires from                    Traxxas for use with the Jato. FEATURES: Angled rib design, with two ribs to the left and right of center           2.8" tire INCLUDES: Two Shredder front 2.8" tires           Two foam inserts REQUIRES: Jato wheels           Tire glue SPECS:    Width: 2" (50mm)           Inner Diameter: 2.8"(71.12mm)           Outer Diameter: 3.6" (92mm) COMMENTS: The Traxxas Jato can also use standard 2.2" truck wheels and tires.

249,-

KONTAKT

Kunder kjøpte også

  These are Front All Star Chrome Front 2.8" wheels              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction           Chrome plated           Five spoke wheel pattern           Uses 5mm x 11mm bearings INCLUDES: Two front chrome wheels REQUIRES: Assembly onto vehicle SPECS:    Outer Diameter: 3.1" (79mm)           Bead Diameter:  2.8" (72mm)           Width:          2.0" (51mm)

99,-

KJØP
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Pro-Line 119200 Masher 2.8" All Terrain Truck Tire F/R (2) This is a pair of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires FEATURES Fors the front and rear of 1/10 scale monster trucks  Chevron style tread for good traction on rough terrain  Side tread has a hook design that craters the dirt for excellent  side traction  M2 (soft) compound INCLUDES Two Masher M2 2.8" Monster Truck Tires with Foam Inserts REQUIREMENTS 1/10 scale monster truck wheels  Tire glue SPECIFICATIONS  Diameter: 4.90" (124mm)  Width: 2.8" (71mm)

275,-

Ikke på lager
This is a set of telescoping drive shafts. Includes:  2 black nylon telescoping shaft (each shaft is made of two pieces)            4 aluminum U-joints

59,-

69,-

KJØP
-14%
This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:   6mm           Diameter: 3mm

35,-

KJØP
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP
-14%
Denne er også til dem som skal ha TRX 5552 og 5552X This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction INCLUDES: One Steel Disc           Three Friction Pads           Two Springs           One 4mm Lock Nut           One 5mm Lock Nut           Instructions REQUIRES: Disassembly of slipper clutch

119,-

Ikke på lager
These are the Differential Output Yokes                 for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes           Two 3x5mm countersunk screws           Two screw pins REQUIRES: Installation SPECS:    Length: .70" (18mm)           Diameter: .51" (13mm)

59,-

Ikke på lager
These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS:    Length: 12mm           Diameter: 3mm    

39,-

Ikke på lager
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
This is a pair of Talon Tires from Traxxas for use with the Jato. FEATURES: Talon lug design           Rubber construction _         Foam tire insert INCLUDES: Two Talon 2.8" tires           Two foam inserts REQUIRES: Jato wheels.           Tire Glue. SPECS:    Outer Diameter: 4.6" (117mm)           Inner Diameter: 2.8" (71.12mm)           Width: 2" (51mm)

239,-

KJØP
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
These are the Rear Chrome All Star Wheels          for the Traxxas Rustler and Stampede standard or XL version. FEATURES: Nylon construction           Chrome plated           Five spoke wheel pattern           Uses 12mm hex adapter INCLUDES: Two Rear Chrome Wheels REQUIRES: Assembly onto Vehicle SPECS:    Bead diameter: 2.8" (71mm)           Width: 2.0" (51mm) COMMENTS: These wheels only work on the rear of the Rustler or Stampede              standard or XL version.

99,-

KJØP
This is the Complete Planetary Gear Differential With Steel Ring Gear                 for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal gear shafts           Metal and plastic main differential INCLUDES: Main differential with steel ring gear           Planetary gears and shafts           Sun gears and shafts           Silicone  grease REQUIRES: Installation on the vehicle COMMENTS: For main differential w/ steel ring - TRX 2381X                     Planet gear shafts - TRX 2382                     Silicon grease  - TRX 1647

179,-

189,-

KJØP
-5%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png