Hopp til innhold

Traxxas 3772 All-Star Wheels 2.8" Re Chrome (2)

Art.nr: TRX 3772

99,-

Traxxas

Traxxas

På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Rear Chrome All Star Wheels
         for the Traxxas Rustler and Stampede standard or XL version.


FEATURES: Nylon construction
          Chrome plated
          Five spoke wheel pattern
          Uses 12mm hex adapter


INCLUDES: Two Rear Chrome Wheels


REQUIRES: Assembly onto Vehicle


SPECS:    Bead diameter: 2.8" (71mm)
          Width: 2.0" (51mm)


COMMENTS: These wheels only work on the rear of the Rustler or Stampede
             standard or XL version.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRX5853X & TRX6856X 17mm wheel adapter assemblies for the Traxxas Slash line of trucks.                                

99,-

KJØP
These are the 58mm Turnbuckle Camber Links               for the Traxxas Nitro Jato Stadium Truck and Slash 4x4. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends           Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods           Four 3mm Ball Ends           Four 3mm Hollow Balls REQUIRES: Assembly onto Vehicle

95,-

KJØP
This is the optional Aluminum Rear Stub Axle Housing for the                     Traxxas Rustler, Stampede, and Bandit. FEATURES: 6061-T6 Aluminum Construction           Anodized Blue in Color INCLUDES: Two Aluminum Rear Stub Axles           Four 5x11mm Bearings REQUIRES: Installation into Vehicle

379,-

429,-

KJØP
-12%
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

KJØP
-9%
This is the optional Aluminum Rear Stub Axle Housing for the                     Traxxas Rustler, Stampede, and Bandit. FEATURES: Aluminum construction           Anodized red in color INCLUDES: Two Aluminum Rear Stub Axles           Four 5x11mm Bearing REQUIRES: Installation into Vehicle

379,-

429,-

KJØP
-12%
These are the optional Traxxas Aluminum Steering Blocks for the                         Rustler, Stampede and Bandit. FEATURES: Aluminum construction           Anodized blue in color INCLUDES: One Left and Right Alloy Steering Block           Four 5x11mm Metal Bearings REQUIRES: Installation into Vehicle

399,-

429,-

KJØP
-7%
These are the Traxxas optional Aluminum Steering Blocks for the                        Rustler, Stampede and Bandit. FEATURES: Aluminum construction           Anodized red in color INCLUDES: One Left and Right Alloy Steering Block           Four 5x11mm Metal Bearings REQUIRES: Installation into Vehicle

399,-

429,-

KJØP
-7%
This is the Red Aluminum Steering Bellcrank from Traxxas. FEATURES: Metal construction, anodized red in color           Factory assembled and ready to install INCLUDES: One red-anodized T6 aluminum steering bellcrank           Four 5x8mm ball bearings           Hardware REQUIRES: Installation COMMENTS: Also available in blue

379,-

399,-

KJØP
-5%
This is the Receiver Box for use on the               Traxxas Stampede, Rustler, and Bandit Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Receiver Box           One Rubber Seal           Foam Padding           Two 2.5x8mm Cap Head Screws           Two 3x10mm Cap Head Screws           Two 2.5x10mm Cap Head Screws           One Tube of Grease           Instruction sheet REQUIRES: Installation on the vehicle SPECS:    Length: 78mm (3.07")           Width: 35mm (1.4")           Height: 33mm (1.3")

145,-

Ikke på lager
This is a pair of Rear Victory Tires from                   Traxxas for use with the Jato. FEATURES: Racing type with horizontal bead design INCLUDES: Two Victory Rear 2.8" tires           Two foam inserts REQUIRES: Jato wheels           Tire Glue SPECS:    Outer Diameter: 3.7" (95mm)           Inner Diameter: 2.8" (71.12mm)           Width: 2" (51mm) COMMENTS: The Traxxas Jato can also use standard 2.2" truck wheels and tires.

209,-

KJØP
This is a pair of 2.8" Rear Alias Tires with foam inserts from               Traxxas for use with vehicles such as the Jato. FEATURES: Super soft rubber compund           Dual pin design INCLUDES: Two rear Alias tires           Two foam inserts REQUIRES: 2.8" wheels            Tire glue SPECS:    Width: 2.1" (53.34mm)           Inner Diameter: 2.8" (71.12mm)           Outer Diameter: 4.3" (109.22)

249,-

Ikke på lager
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

These are the left and right gearbox halves for the Traxxas Rusler and Stampede truck kits. Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts           Assembly Comments: These do not include the hardware for assembly. Refer to manual for           appropriate screws.

99,-

Ikke på lager
This is a pair of Stub Axle Carriers                for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

KJØP
NB! Disse har 14mm hex!   These are the Beadlock Satin Chrome Wheels for the          Traxxas Slayer Pro 4WD Short Course Nitro RTR FEATURES: Plastic construction           Satin chrome finish           5-spoke design           beadlock style INCLUDES: One pair of beadlock satin chrome wheels REQUIRES: Installation on the vehicle

99,-

KJØP
This is the JConcepts Illuzion Chassis Over-Tray for use on the Traxxas Slash 2WD FEATURES: Polycarbonate construction Protects chassis from excessive debris Plenty of clearance for various electrical and battery configurations INCLUDES: One Illuzion Over-Tray REQUIRES: Installation on the vehicle Polycarbonate-safe paint of modeler's choice Body Scissors. SPECS:    Length: 400mm (15.75") Width: 190mm (7.5") Height: 75mm (3")       (B5)

209,-

Ikke på lager
These are the Rear Chrome Wheels.           FEATURES: Nylon construction           Chrome plated           Five spoke wheel pattern           Uses 12mm hex adapter INCLUDES: Two Rear Chrome Wheels REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 3.08" (78.3mm)           Width: 1.91" (48.6mm)           Bead Diameter: 2.83" (72mm)

99,-

KJØP
This is the Complete Planetary Gear Differential With Steel Ring Gear                 for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal gear shafts           Metal and plastic main differential INCLUDES: Main differential with steel ring gear           Planetary gears and shafts           Sun gears and shafts           Silicone  grease REQUIRES: Installation on the vehicle COMMENTS: For main differential w/ steel ring - TRX 2381X                     Planet gear shafts - TRX 2382                     Silicon grease  - TRX 1647

179,-

189,-

KJØP
-5%
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

KJØP
This is the Traxxas replacement Body Washers. FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm) INCLUDES:  Eight large body mount washers

29,-

Ikke på lager
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
These are the All-Star 2.8" Black Chrome Wheels          for the Traxxas Stampede and Rustler. FEATURES: Black chrome wheels INCLUDES: Two All-Star 2.8" black chrome wheels for the nitro rear/electric              front REQUIRES: Installation on the vehicle SPECS:    Overall Diameter: 2.8" (71mm)           Width: 1.92" (49mm)

109,-

KJØP
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
These are the Differential Output Yokes                 for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes           Two 3x5mm countersunk screws           Two screw pins REQUIRES: Installation SPECS:    Length: .70" (18mm)           Diameter: .51" (13mm)

59,-

Ikke på lager
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png