Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-Revo 1/10 Brushless / Traxxas 3996X Idler Gear 20T/Idler Gear Shaft E-Maxx

Traxxas 3996X Idler Gear 20T/Idler Gear Shaft E-Maxx

Art.nr: TRX 3996X

69,-

Traxxas

Traxxas
På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

is is the replacement 20 Tooth Idler Gear and Shaft for the
                       Traxxas E-Maxx 4WD RTR.

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear and shaft


INCLUDES: One 20 Tooth Idler Gear
          One 5x18mm Idler Gear Shaft


REQUIRES: Installation following the model manual


SPECS:    Outside Diameter: .86" (22mm)
          Inside Diameter: .43" (11mm)
          Thickness: .50" (12.5mm)

 

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 3655-BLK Suspension arms, black, front/rear ...
Traxxas 3655-BLK Suspension arms, black, front/rear ...
Traxxas 3655-BLK Suspension arms, black, front/rear (left & right), heavy duty (2)

149,-

159,-

På lager 4
KJØP
-6%
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 5379X Differential Ring Gear/Pinion Gear
Traxxas 5379X Differential Ring Gear/Pinion Gear
This is the Differential Ring Gear and Pinion                  for use with the Traxxas Revo 3.3 and many other Traxxas Cars. FEATURES: Direct replacement part INCLUDES: One differential ring gear           One pinion gear REQUIRES: Traxxas Revo 3.3           2.5x8mm cap head screws TRX 3965

219,-

På lager 10
KJØP
Hovedbilde Traxxas 3961 Spur Gear 0.8P 68T
Traxxas 3961 Spur Gear 0.8P 68T
This is the optional .8 Metric Pitch 68 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.16" (55mm)           Thickness: .23" (6mm)

39,-

På lager 2
KJØP
Hovedbilde Traxxas 1985 Fiber Washers 5x8mm (20)
Traxxas 1985 Fiber Washers 5x8mm (20)
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

På lager 2
KJØP
Hovedbilde Traxxas 4931 Susp.arms upper&lower
Traxxas 4931 Susp.arms upper&lower
Susp.arms upper & lower

99,-

På lager 2
KJØP
Hovedbilde DynoMAX 9572 Connector Bullet 4mm Male 10pcs Hovedbilde DynoMAX 9572 Connector Bullet 4mm Male 10pcs
DynoMAX 9572 Connector Bullet 4mm Male 10pcs
  Bullet Connector Diameter: 4mm Bullet Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm

209,-

På lager 3
KJØP
Hovedbilde Tamiya 50882 Kingpin Set TA04 (4)
Tamiya 50882 Kingpin Set TA04 (4)
 This is the Kingpin Set from Tamiya for the TA-04 chassis cars. FEATURES: Black steel kingpins INCLUDES: Four kingpins REQUIRES: Installing on vehicle COMMENTS: Works only for the Tamiya TA-04 kits

35,-

På lager 1
KJØP
Hovedbilde Traxxas 3930 Bulkhead Cross Brace E-Maxx (2)
Traxxas 3930 Bulkhead Cross Brace E-Maxx (2)
NB! Bilde viser feil skruer. These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.            These Braces are located in between the bumper mounts. FEATURES: Black nylon construction INCLUDES: Two Bulkhead Cross Braces           Eight 3x25mm Cap-Head Machine Screws REQUIRES: Installation onto and E-Maxx. SPECS:    Mounting holes on-center: 19mm           Bulkhead width: 29mm           Bulkhead height: 28mm

39,-

På lager 5
KJØP
Hovedbilde Yeah Racing YB6049B/S10 RC PTFE Bearing (17X26X5mm) ...
Yeah Racing YB6049B/S10 RC PTFE Bearing (17X26X5mm) ...
Yeah Racing RC PTFE Bearing (17X26X5mm) 10pcs Description: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Feature: Aircraft quality material More durable Higher precision Material: Metal Bearing, Rubber Shield Include: Yeah Racing PTFE Bearing 17X26X5mm (10 pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:    High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

149,-

På lager 16
KJØP
Hovedbilde Traxxas 8682 Diff Gear Set
Traxxas 8682 Diff Gear Set
Gear set, differential (spider gears (4), spider gear shaft (2)) 

119,-

På lager 6
KJØP
Hovedbilde Traxxas 8637 Skid Plate Set
Traxxas 8637 Skid Plate Set
Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

95,-

På lager 2
KJØP
Hovedbilde Traxxas 7791 Pinion Gear/Diff/11T Rear Heavy Duty ...
Traxxas 7791 Pinion Gear/Diff/11T Rear Heavy Duty ...
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

** Ikke på lager
KJØP
-8%
Hovedbilde Traxxas 7792 Ring Gear/Diff/35T Heavy Duty X-Maxx
Traxxas 7792 Ring Gear/Diff/35T Heavy Duty X-Maxx
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

På lager 2
KJØP
-13%
Hovedbilde Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx
Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx
This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball cups  Connects steering assembly to each steering block   INCLUDES Left and Right Toe Link   SPECIFICATIONS  Total Length: 6.8" (173mm)  Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

På lager 1
KJØP
-8%
Hovedbilde Traxxas 7429 Bulkhead Rear 1/10 Rally VXL
Traxxas 7429 Bulkhead Rear 1/10 Rally VXL
    This is the Bulkhead Rear                   For the Traxxas 1/10 Rally VXL rally car FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS:    Length: 3"       (76mm)           Width:  2-13/16" (71mm)           Height: 2"       (51mm)

79,-

89,-

På lager 1
KJØP
-11%
Hovedbilde Traxxas 6879 Differential Ring and Pinion Gear
Traxxas 6879 Differential Ring and Pinion Gear
This is the Differential Ring and Pinion Gear for use on many Traxxas Vehicles. FEATURES: Steel construction INCLUDES: One Differential Ring Gear           One Differential Pinion Gear REQUIRES: Installation in differential assembly SPECS:    Pinion Gear:            Tooth: 13T            Inner Diameter: 5mm (0.20")           Ring Gear:            Tooth: 37T            Inner Diameter: 6mm (0.24")

199,-

På lager 3
KJØP
Hovedbilde LouiseRC LT222 Silicone Oil 50000cSt 75ml
LouiseRC LT222 Silicone Oil 50000cSt 75ml
Louise Silicone 50.000cSt Differential Fluid - 75 ml Content: 75 ml Viscocity: 50.000cSt

89,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Hovedbilde Traxxas 6449X Spur Gear 54T Steel (1.0 Metric Pitch) ...
Traxxas 6449X Spur Gear 54T Steel (1.0 Metric Pitch) ...
This is the 54T Spur Gear for the Traxxas X-Maxx Monster Truck. FEATURES Hardened steel construction INCLUDES 54T Spur Gear SPECIFICATIONS Number of Teeth: 54 Pitch: 1.0 metric Pressure Angle: 20°

219,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 5446 Wing Black Revo.
Traxxas 5446 Wing Black Revo.
This is the Black Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)           Width: 3" (76.2mm)

189,-

På lager 3
KJØP
Hovedbilde BSD 909-003 Main Gear-51T
BSD 909-003 Main Gear-51T
Main Gear-51T

79,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

** Ikke på lager
KJØP
Hovedbilde BSD 909-005M Motor Gear 11T/M3 Screw
BSD 909-005M Motor Gear 11T/M3 Screw
Hard metall pinjong til BSD sin Monster Truck Børste og Børste løs (909 & 706T) Og Buggy Børste og børsteløs. (701G & 701G-R) Dette er biler i scala 1:10 Denne brukes sammen med 45-MPO021M

109,-

På lager 2
KJØP
Hovedbilde Vant Battery 11.1V 6000mAh 60C Deans – XH
Vant Battery 11.1V 6000mAh 60C Deans – XH
6000mAh-3S1P-60C 11.1V Discharging connector: “Deans”  Softcase Størrelse:      155x 48x 27mm Lengde:                     155mm Lende med ledningen: 160mm Høyde:                         27mm Bredde:                        48mm Bredde med ledningen: 48mm (der ledingen kommer ut på siden) Cable length: 125mm Vekt : 432 gram

895,-

995,-

** Ikke på lager
KJØP
-10%
Hovedbilde Vant Hard Case 7.4V 4200mAh 30C Deans XH
Vant Hard Case 7.4V 4200mAh 30C Deans XH
 Hard Case 7.4V 4200mAh 30C Deans XH 25.1x47x138mm

439,-

På lager 4
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png