Hopp til innhold

Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)

Art.nr: TRX 8650

139,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Ultra bright WHITE LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

KJØP
Ultra bright RED LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

KJØP
Rebuild kit, GTR shocks (x-rings, bladders, pistons, piston nuts, shock rod ends) (renews 2 shocks)

59,-

KJØP
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

KJØP
This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball cups  Connects steering assembly to each steering block   INCLUDES Left and Right Toe Link   SPECIFICATIONS  Total Length: 6.8" (173mm)  Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

KJØP
-8%
Traxxas 7734X - X-Maxx Rear Bumper Mount and Bumper Support X-Maxx® rear bumper mount and bumper support

89,-

KJØP
This is the Rear Bumper for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   SPECIFICATIONS  Length: 7.9" (202mm)  Height: 1.6" (41mm)

79,-

KJØP
X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

149,-

KJØP
This is the Chassis Top Brace for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic construction     INCLUDES Chassis Top Brace     SPECIFICATIONS Length: 14.5" (368mm)

99,-

119,-

KJØP
-17%
Steering blocks, left & right

69,-

KJØP
Skidplate Set Front & Rear with Rubber Impact Cushion XRT Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cusion

119,-

149,-

KJØP
-20%
Bulkhead Front Lower XRT Bulkhead, front (lower) Replacement XRT™ front lower bulkhead

189,-

199,-

KJØP
-5%
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

KJØP
-13%
Caster blocks (c-hubs), left & right

69,-

KJØP
Tires, Talon EXT 3.8" (2)/ foam inserts (2)

369,-

389,-

KJØP
-5%
Wheels, 3.8" (black) (2) (17mm splined)

129,-

139,-

KJØP
-7%
RPM Tubular Front Bumper for Revo 3.3 & E-Revo (old) Replaces stock Traxxas #5335 Quick Links: Replaces stock Traxxas #5335 Matching Revo Rear Bumper is available Supporting Bumper Mount is available RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular front and rear bumpers. RPM bumpers for the Traxxas Revo are made from our bulletproof blend of nylons. RPM nylons are the best material for protecting your Revo since our materials are lightweight, inexpensive, and tougher than anything else available! We’ve re-engineered the front and rear bumpers to improve strength, especially around the screw holes, which eliminates potential weak points, and we’ve designed a recessed flat where with a little creativity, anyone can add in a customized, scale license plate. Additionally, our rear bumper has a flat area perfect for adding a ball stud for a faux ball hitch (see our FAQ page of our website for more information). Our colors are molded into each bumper so scratches and nicks won’t cut through to a different color underneath. In addition, our chrome bumpers are molded over our metallic silver bumper so scratches won’t show as easily as a stock bumper (where black is the base color). RPM bumpers carry our lifetime warranty against breakage and will hold up to the roughest of punishment.

119,-

KJØP
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Fan MP3010BL 6V 16000RPM - MAX8 G2   For MAX8 G2S Hobbywing's patented flameless cooling system. Cyclone cooling fan produces more airflow than a traditional model while consuming equal or less energy. As result, your ESC remains cool and performs at optimal condition. Which cooling fan is for you? 30860107 - 3010BH - XR8 Plus G2S 30860008 - 2510BH - XR10 PRO G2S - Stealth 30860009 - 2510BH - XR10 PRO G2S - Elite 30860108 - 3010BH - MAX8 G2S Cooling fan Specification 30860107: 6V/16000RPM / Frameless Cyclone / Non-waterproof / ZH Male Plug / L=30mm   30860108: 6V/16000RPM / Frameless Cyclone / Non-waterproof / ZH Male Plug / L=30mm 30860008: 6V/16000RPM / Frameless Cyclone / Non-waterproof / ZH Male Plug / L=30mm 30860009: 6V/20000RPM / Ball Bearing Cyclone / Non-waterproof / ZH Male Plug / L=30mm

239,-

259,-

KJØP
-8%
This is the Servo Y Harness for the Dual Steering Servos                         for the REVO from Traxxas. FEATURES: Futaba J connectors (one male to go into the RX and two female to            go to the servos) INCLUDES: One Y harness w/two 3" zip ties REQUIRES: Nothing SPECS:    Length: 3" (76mm) approx

49,-

KJØP
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)   16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

49,-

KJØP
Wheelie Bar Mount Revo/ E-Revo   Wheelie bar mount (1)(fits 1/10 scale Revo trucks)

79,-

KJØP
These are the Front and Rear Red Aluminum Bulkhead Tie Bars for the 1/10 scale Traxxas Revo. FEATURES Red anodized aluminum Flat tie bar installs at rear INCLUDES One front & one rear Tie Bar w/one 3x10mm button head screw

99,-

KJØP
Cush drive key/ pin/ elastomer damper

39,-

49,-

KJØP
-20%
Grease, premium high performance (20cc)

159,-

169,-

KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png