Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Summit 1/10 / Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed
-6%

Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed

Art.nr: TRX 2270

749,-

799,-

- 6%
Traxxas

Traxxas
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 2270 High-Torque Digital Metal Gear Servo

The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 17kg/cm of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup.


SPECIFICATIONS:

  • Torque: 236 oz-in @ 6.0V
  • Speed: 0.175 sec/60° @ 6.0V
  • Waterproofing: Sealed case with O-ring
  • Gears: Metal
  • Case: Plastic with full ball bearings
  • Dimensions: 55 mm H x 44.5 mm L x 20 mm W
Length: 55 mm
Height: 44,5 mm
Width: 20,0 mm
Speed at 6,0V: 0,175 sec/60°
Torque at 6,0V: 17 kg/cm
Features: Digital , Metal Gears

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ... Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ...
Traxxas 2075X Servo Digital Metal Gear with BB and ...
Art.nr: TRX 2075X
Copied
Servo, digital high-torque, metal gear (ball bearing), waterproof     Length: 41 mm Height: 42 mm Width: 20 mm Max Voltage: 6,0 V Features: Water Proof, Digital, Metal Gears

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
Art.nr: TRX 2255
Copied
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Traxxas Servo 2070 Digital BB
Traxxas Servo 2070 Digital BB
Art.nr: TRX 2070
Copied
Traxxas 2070 - Digital Ball Bearing Servo   Ball Bearing Digital High-torque Power: 9kg/cm Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

429,-

469,-

KJØP
-9%
Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ... Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Art.nr: TRX 2250
Copied
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Hovedbilde Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...
Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...
Art.nr: TRX 2280
Copied
Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case New Top-of-the-Line 1/10 Servo with Full Aluminum Case! 2280 Specs & Features: High Torque: 43kg/cm 87% more torque than stock Sledge servo 5X more torque for TRX-4 with 2262 external BEC High Speed: 0.13 sec/60° Twice as fast as stock Sledge Full Aluminum Heat Sink Case Full Steel Gears with steel output Brushless motor technology Waterproof Dual ball bearings Factory fit for drop-in installation into 1/10 scale Traxxas models* * Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

1.695,-

1.995,-

KJØP
-15%
Hovedbilde Traxxas 2055 High Torque Servo
Traxxas 2055 High Torque Servo
Art.nr: TRX 2055
Copied
  This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx         or any other vehicle that you would like to mount this in.   This part goes between the receiver and hooks to the steering or motor or                engine to provide the power to either of these. FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS:    Length:  1.6" (40.5mm)           Width:   .8"  (20.5mm)           Height:  1.43" (36mm)           Torq:    80 oz/in           Weight:  1.58oz (45g)

389,-

419,-

KJØP
-7%
Hovedbilde Traxxas 2056 Servo High Torque Waterproof Hovedbilde Traxxas 2056 Servo High Torque Waterproof
Traxxas 2056 Servo High Torque Waterproof
Art.nr: TRX 2056
Copied
This is the replacement High Torque Waterproof Servo                      for many Traxxas cars. FEATURES: Plastic waterproof blue case INCLUDES: One high torque waterproof servo with J style connector REQUIRES: Mounting in the car. SPECS:    Length: 2.16" (55mm)           Width: .78"  (20mm)           Height: 1.69" (43mm)           Weight:  1.58oz (45g)  

399,-

419,-

KJØP
-5%
Hovedbilde Traxxas 2075 Servo Digital BB Sealed
Traxxas 2075 Servo Digital BB Sealed
Art.nr: TRX 2075
Copied
Traxxas 2075 - Waterproof Digital Servo The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°. SPECS:    Ball Bearing Digital High-torque Power: 125 oz-in (9kg/cm) Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

549,-

589,-

KJØP
-7%
Hovedbilde Traxxas 2075R Servo, digital high-speed, metal gear ...
Traxxas 2075R Servo, digital high-speed, metal gear ...
Art.nr: TRX 2075R
Copied
Servo, digital high-speed, metal gear (ball bearing), waterproof

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed
Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed
Art.nr: TRX 2275
Copied
Traxxas 2275 - Servo 25Kg Digital BB Metal Gear Sealed Specs: Motor Type: Brushed Operating Voltage: 6-7.4V DC Torque: 25 kg/cm (6V) - 35kg (7.4V) Speed: 0.25 sec/60° (6V) - 0.16 sec/60° (7.4V) Weight: 67g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital Weight: 67 g Max Voltage: 7,4 V Speed at 6,0V: 0,25 sec/60° Speed at 7,2/7,4V: 0,16 sec/60° Torque at 6,0V: 25 kg/cm Torque at 7,2/7,4V: 35 kg/cm Features: Digital , Dual Ball Bearing , HV , Metal Gears

899,-

949,-

KJØP
-5%

Kunder kjøpte også

Hovedbilde Traxxas 7462 Shocks Blue GTR XX-Long without springs ...
Traxxas 7462 Shocks Blue GTR XX-Long without springs ...
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

KJØP
-8%
Hovedbilde Traxxas 7461 Shocks Blue GTR Long without springs (2)
Traxxas 7461 Shocks Blue GTR Long without springs (2)
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

KJØP
-4%
Hovedbilde Traxxas 3415 Tool Kit Hovedbilde Traxxas 3415 Tool Kit
Traxxas 3415 Tool Kit
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
Hovedbilde Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...
Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...
This is the set of Traxxas Extra Extra Long GTR Shock Springs                       with 1.004 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 1.004 Blue Rate GTR Shock Springs SPECS:    Length: 2.2" (56mm)           Wire Diameter: 0.043" (1.1mm)

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...
Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...
 This is the set of Traxxas Long GTR Shock Springs                       with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)

69,-

KJØP
Hovedbilde Traxxas 7462X Shocks GTR XX-Long Hard Anodized (2)
Traxxas 7462X Shocks GTR XX-Long Hard Anodized (2)
    This is a pair of XX-Long Traxxas GTR Shocks. FEATURES: Hard anodized PTFE aluminum bodies           TiN coated shafts INCLUDES: Two XX-Long Traxxas GTR Shocks           Bottle of Silicone Shock Oil REQUIRES: Springs of modeler's choice SPECS:    Length: 3.9" (100.5mm) from upper and lower mounting hole centers   Fjærer som passer TRX 7446

469,-

499,-

KJØP
-6%
Hovedbilde Traxxas 7461X Shocks GTR Long Hard Anodized (2)
Traxxas 7461X Shocks GTR Long Hard Anodized (2)
This is a pair of Long Traxxas GTR Shocks. FEATURES: Hard anodized PTFE aluminum bodies           TiN coated shafts INCLUDES: Two Long Traxxas GTR Shocks           Bottle of Silicone Shock Oil REQUIRES: Springs of modeler's choice SPECS:    Length: 3.3" (84mm) from upper and lower mounting hole centers   Fjærer som passer. TRX 7444

459,-

489,-

KJØP
-6%
Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL
Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL
This is the Wing for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction, black in color INCLUDES: One Wing           One Decal Set REQUIRES: Installation on the vehicle SPECS:    Length: 118mm (4.6")           Width: 43mm (1.7")           Height: 29mm (1.1")

75,-

KJØP
Hovedbilde Zap Adhesives Foam Safe Kicker 2 oz Hovedbilde Zap Adhesives Foam Safe Kicker 2 oz
Zap Adhesives Foam Safe Kicker 2 oz
  This is 2oz bottle of Pacer Foam Safe Kicker with Pump. FEATURES: Safe on most foam products           Compatible with most other Foam Safe CAs           Works on Balsa, Spruce, Plywood, Plastic and Metals, etc           Forces most CAs to cure in 10 seconds or less           Increases Gap filling and fillet forming compability           None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker           One pump REQUIRES: Use with CA glues SPECS:    2oz (59.1ml)

139,-

KJØP
Hovedbilde Zap PT-03 Adhesives Zap-A-Gap CA (Medium)
Zap PT-03 Adhesives Zap-A-Gap CA (Medium)
This is a 1/2oz Bottle of Zap-A-Gap CA+ Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Superior gap filling formula. Medium viscosity. Allows approximately 7-10 seconds for part positioning. Average of 20 seconds curing. Works on oily surfaces also. Use Zip Kicker to accelerate cure time. INCLUDES One 1/2oz Bottle of Zap-A-Gap CA+ Glue. SPECIFICATIONS 1/2oz (14.2g)

89,-

KJØP
Hovedbilde Zap PT09 Adhesives Zap CA 1/2 oz
Zap PT09 Adhesives Zap CA 1/2 oz
The ZAP CA Glues are clog-resistant with and have an extra, long tip to reach into tight spots. Easy-to-squeeze bottles aid in applying just the right amount of glue for easier sanding and less mess. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Wicks quickly for instant bonds on tight-fitting parts. INCLUDES One ZAP CA Glue 1/2oz Thin COMMENTS Thin is instant setting: CA Thick is gap filling: CA+

79,-

KJØP
Hovedbilde Zap PT-25 Odourless Foam-Safe CA+ 0.7
Zap PT-25 Odourless Foam-Safe CA+ 0.7
Odourless -no more tears- formula safe for all hobby foams Medium thick Cures in 15 second Works best on: Metal, Wood, Rubber, Most plastics, Aluminium Works best on: Ceramic, China, Foam  

179,-

KJØP
Hovedbilde Traxxas 8247X Servo Horn Steering Metal TRX-4
Traxxas 8247X Servo Horn Steering Metal TRX-4
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

KJØP
Hovedbilde Traxxas 3215 Back Plate Screws 2.5x6mm (6)
Traxxas 3215 Back Plate Screws 2.5x6mm (6)
This is the stock replacement backplate screw set for the Image .12 Traxxas engine. Features: cap-head aluminum design Includes 6  2.5x6mm cap-head (sockethead) screws

29,-

KJØP
Hovedbilde Tamiya 86008 PS-8 Polycarbonate Spray Light Green 3 oz
Tamiya 86008 PS-8 Polycarbonate Spray Light Green 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-8 Light Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

KJØP
Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ... Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP
Hovedbilde Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...
Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...
Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles) Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 6888X Front Hardened Steel Drive Hub Slash 4x4 ...
Traxxas 6888X Front Hardened Steel Drive Hub Slash 4x4 ...
This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: One Drive Hub           One Screw Pin REQUIRES: Installation on the vehicle SPECS:    Length: 19mm (0.75")           Diameter: 12mm (0.47")

59,-

KJØP
Hovedbilde Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)
Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)
This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:   6mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 2577 Button Head Screw 3x10mm Revo (6)
Traxxas 2577 Button Head Screw 3x10mm Revo (6)
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

KJØP
Hovedbilde Traxxas 6519 Receiver Micro TQ 2.4GHz (3CH)
Traxxas 6519 Receiver Micro TQ 2.4GHz (3CH)
This is the TQ 2.4GHz 3-Channel Micro Receiver                 for use with the Traxxas TQ 2.4GHz Transmitter. INCLUDES: TQ 2.4GHz 3-Channel Micro Receiver SPECS:    Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)           Weight: 0.35oz (10g)

369,-

429,-

KJØP
-14%
Hovedbilde Traxxas 2579 Button Head Machine Screw 3x15mm Revo (6) ...
Traxxas 2579 Button Head Machine Screw 3x15mm Revo (6) ...
This is a package of six 3x15mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm button head screw is required INCLUDES: Six 3x15mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 2580 Button Head Machine Screw 3x20mm Revo (6) ...
Traxxas 2580 Button Head Machine Screw 3x20mm Revo (6) ...
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png