Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør regulator / Hobbywing Program Card for Car ESC

Hobbywing Program Card for Car ESC

Art.nr: 30501003

175,-

Hobbywing
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

OBS: Dette er G2-utgaven. Sjekk at denne passer mot din ESC.

Overview

This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It’s compact, portable and very applicable for field use. 

It works with the following HobbyWing products:
1. Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs. 
2. XeRun series (not all), EzRun series & QuicRun series of brushless car ESCs. 
3. SeaKing series of brushless boat ESCs.

 

Specifications

  • Size：88x58x14mm（LxWxH）
  • Weight：40g
  • Input Voltage: 4.8V—8.4V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)

Produsent

Hobbywing

Relaterte produkter

 

Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s
Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s
Art.nr: 30107200
Copied
QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

KJØP
-6%

Kunder kjøpte også

Hovedbilde Radient 010010 DEANS PAIRS WITH CAP END (5PCS)
Radient 010010 DEANS PAIRS WITH CAP END (5PCS)
DEANS PAIRS WITH CAP END (5PCS)

109,-

KJØP
Hovedbilde Fuse Overgang - Male Deans til Female Tamiya
Fuse Overgang - Male Deans til Female Tamiya
Fuse Overgang - Male Deans til Female Tamiya

49,-

KJØP
Hovedbilde Tamiya 87061 Metal Primer Clear-100ml
Tamiya 87061 Metal Primer Clear-100ml
Tamiya metal primer, til bruk på metal. Den er "KLAR" av farge, og det indikeres av lokket på boksen. 100ml per boks

109,-

KJØP
Hovedbilde Tamiya 85008 Spray Lacquer TS-8 Italian Red 3 oz
Tamiya 85008 Spray Lacquer TS-8 Italian Red 3 oz
   This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Italian Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Hovedbilde Yeah Racing TRX4-096 Steel Spur Gear 45T 32P For ...
Yeah Racing TRX4-096 Steel Spur Gear 45T 32P For ...
Steel spur gear for beefing up your Traxxas TRX-4 drivetrain, a lot of load is placed upon the drivetrain whilst crawling on the trail!   Feature: For: Traxxas TRX-4 Material: Steel Color: Black   Include: Spur Gear (1 pc)

189,-

KJØP
Hovedbilde Traxxas 3949X Pinion Gear 19T-32P Hardened Steel
Traxxas 3949X Pinion Gear 19T-32P Hardened Steel
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

KJØP
-10%
Hovedbilde RECEIVER 6 CHANNEL BS6 FLYSKY Hovedbilde RECEIVER 6 CHANNEL BS6 FLYSKY
RECEIVER 6 CHANNEL BS6 FLYSKY
Mottaker til blant annet Flysky FS-GT5, IT4S og Absima CR6P. Egner seg godt til radiostyrt bil og båt. Kompatibel med FlySky AFHDS 2A-radioer, blant annet FS-GT5. Ikke kompatibel med AFHDS 3-radioer som Noble NB4/NB4 Pro/NB4 Pro+. Mottakeren har innebygget gyro på styrekanalen som kan benyttes om ønskelig. Bindekabel følger med. Fra produsenten: Product Model: FS-BS6 PWM channels: 6 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 2A Range: 100 ～ 300m (ground) Antenna type: single antenna (180m) Power: 4.0-6.5V RSSI: Supported Data port: PWM Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: Yes Dimensions: 29 * 22 * 16.2 mm Weight: 7.6 g Certification: CE, RCM, FCC ID: N4ZBS600 Kompatibilitet FlySky FS-BS6 er en 6-kanals mottaker med AFHDS 2A-protokoll og innebygd gyrofunksjon. Mottakeren er kompatibel med FlySky-radiosendere som benytter AFHDS 2A, blant annet: FlySky FS-GT2E FlySky FS-GT5 Andre FlySky-sendere med AFHDS 2A-støtte Viktig: FS-BS6 er ikke kompatibel med AFHDS 3-sendere som FlySky Noble NB4, NB4+, NB4 Pro, NB4 Pro+ og Paladin PL18. Disse radiosenderne krever AFHDS 3-kompatible mottakere.   Informasjon på engelsk: Gyroscope Calibration The gyro has been calibrated at the factory however if it needs to be recalibrated, follow the steps below: 1. Turn off the transmitter and insert power into channel 1 (not the bind port) The receiver’s LED should start to flash slowly 2. Place the receiver on a flat horizontal surface, make sure it cannot move. 3. Insert the bind cable (plug) into the bind port. The receiver’s LED should start to flash rapidly 3 times then return to the previous flash speed if the calibration has been done successfully Note: to ensure the gyro works as expected, install the receiver horizontally at less than 10 degrees from level on your vehicles Binding Please follow the steps below to bind the BS6 receiver to your remote controller 1. Connect the bind plug to the receiver’s port B/VCC 2. Connect power to any other port on the receiver 3. Press and hold the transmitter bind key and turn on the transmitter in the same time. 4. Once binding is complete, the transmitter will exit bind mode. Remove the power and bind plug from receiver, then apply power to the port B/VCC 5. Check to make sure everything functions as expected, if not, please repeat the steps above. Note, if you are quite sure you follow the above steps completely correctly, please consider to update the firmware of your radio controller or receiver. And if you are still having problem, please check and make sure the receiver IS compatible with the brand and model of your transmitter. Size about 29*22*16mm Weight about 10 grams Channels 6 channels Voltage range: 4.0-8.4V DC Receiver sensitivity: -92dBm RF range: 2.408-2.475GHZ

399,-

549,-

KJØP
-27%
Hovedbilde Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV Hovedbilde Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV
Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV
Hobbywing QuiqRun Fusion SE system for crawlere er et gjenomtenkt, sensorbasert, vanntett og plasseringsvennlig system hvor regulatoren er integrert i motoren. Kompatibelt med 2-3S lipo, leveres med XT60-batterikontakt. Størrelsen tilsvarer en 540-motor slik at systemet passer direkte inn i de aller fleste modeller. Fusion systemet kjennetegnes ved ekstremt stille gange og mye kraft/nøyaktighet ved lave turtall, perfekt for crawlere. Spesifikasjoner Passer for 1/10 Crawlere IP-grad IP-67 Strømtrekk Maks 40A kont. Batteri 2-3S lipo eller 6-9 cell NiMh Størrelse 36x58.1mm Aksling Diameter: 3.175mm / Lengde: 16.5mm Ledninger 14AWG 200mm Kontakt XT60 Vekt 201g inkl. ledning og kontakt Dette systemet oppdateres med LED Program Box   Hobbywing Fusion SE 1800KV The Fusion SE provides an integrated space-saving design for hobbyists. FOC powered with proven design heritage FOC has been a game changer for the crawling segm ent. The extreme efficiency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery. The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs. Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle. U-matched hill-hold function With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups. Designed for Durability Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers. Ready for all weather and track conditions IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specifications: Type: 1/10 Brushless, Sensored, Waterproof (IP67) ESC & Motor Combo Cont./Peak Current: 40A Input Voltage: 2-3S Lipo/6-9 Cell NiMH BEC Output: 6V/7.4V @ 4A (6A peak) Motor KV: 1800KV Diameter/length of Motor: 36mm / 58.1mm Shaft diameter / exposed shaft length: 3.175mm / 16.5mm Motor Poles: 4 Firmware Upgrade: Not Supported Size: 36X58.1mm Weight: 201g (including wires & connectors) Application: 1/10 Rock crawlers Wires & Connectors: Input Wires: 14AWG-200mm Input Connectors: XT60 ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported OTA Programmer: Not Supported Program Port: Independent programming interface (switch position)

1.095,-

1.295,-

KJØP
-15%
Hovedbilde Yeah Racing TRX4-018 RUBBER SAFARI SNORKEL FITS TRX-4
Yeah Racing TRX4-018 RUBBER SAFARI SNORKEL FITS TRX-4
Yeah Racing Rubber Safari Snorkel for Traxxas TRX-4 Description: Scale snorkel made of rubber which allows it to stay upright but also able to bend if your truck is rolled over to prevent it from breaking. Can be trimmed/cut to fit other trucks. *Photos for reference only. Feature: For: Traxxas TRX-4 Material: Rubber Color: Black Include: Rubber Safari Snorkel (1 pc)  

169,-

KJØP
Hovedbilde Dynomax B9501 Connector BEC (JST-RCY) female 100mm ...
Dynomax B9501 Connector BEC (JST-RCY) female 100mm ...
Connector BEC (JST-RCY) female 100mm wire

25,-

KJØP
Hovedbilde Vapex Li-Po Battery 2S 7,4V 1000mAh 25C JST-RCY (BEC)
Vapex Li-Po Battery 2S 7,4V 1000mAh 25C JST-RCY (BEC)
  Suitable for: Small Airplanes etc Battery: LiPo 2S 7.4V 1000mAh 25C 7.5Wh Max Discharge: 25A Continuous / 50A Burst Charge: Max 3C/3A (fast) Connector: JST-RCY (BEC) Wire: 20AWG Balance Connector: XH Length: 67.5 mm Width: 34.6 mm Height: 12.7 mm Weight: 53 g

159,-

KJØP
Hovedbilde Traxxas 8719-50 Speed Bit Nut Driver 5mm
Traxxas 8719-50 Speed Bit Nut Driver 5mm
Speed bit, nut driver, 5.0mm

99,-

119,-

KJØP
-17%
Hovedbilde Dynomax B9500 Connector BEC (JST-RCY) Male 10cm wire
Dynomax B9500 Connector BEC (JST-RCY) Male 10cm wire
Connector BEC (JST-RCY) Male 10cm wire

25,-

KJØP
Hovedbilde Gens Ace Tattu 3S 450mAh - 75C - XT30 Hovedbilde Gens Ace Tattu 3S 450mAh - 75C - XT30
Gens Ace Tattu 3S 450mAh - 75C - XT30
Gens Ace Tattu 3S 450mAh - 75C - XT30 3s LiPo-pakke med høy C-rate for gode prestanda med høyt strømtrekk. 42 gram og ferdig med XT30-batteriplugg og XH balanseringplugg. Spesifikasjoner: Kapasitet: 450mAh Spenning: 3S 11.1V Vekt: 42gram Størrelse: 45x24x21mm Strømplugg: XT30   Product details in english Capacity: 450mAh Voltage: 11,1V Max Continuous Discharge: 75C (33,75A) Max Burst Discharge: 150C (67,5A) Weight:: 42g Dimensions: 45*24*21mm Balance Plug: JST-XH Discharge Plug: XT30 Charge Rate: 1-3C Recommended, 5C Max Battery Comments:All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction , and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high quality battery. Remarkable stacking technology enables single cell capacities of 450mAh High discharge performance and high energy density. Superior Japan and Korea Lithium Polymer raw materials Tattu batteries provide high quality, reliable power for your Multirotor FPV 150 size

175,-

KJØP
Hovedbilde Yeah Racing LK-0038 LED LIGHT KIT FITS TRX-4M Hovedbilde Yeah Racing LK-0038 LED LIGHT KIT FITS TRX-4M
Yeah Racing LK-0038 LED LIGHT KIT FITS TRX-4M
LED light kit for use in your 1/14 Defender or Bronco body, includes LED lights for both the front and rear.     Feature:   For: Traxxas TRX-4M Defender Bronco Front White 3mm LED x 2 Rear Red 3mm LED x 2   Include:   LED Light Cable (1 pc)  

59,-

69,-

KJØP
-14%
Hovedbilde Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ... Hovedbilde Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ...
Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ...
    Explore the outdoors with the all-season adventure model! The newest edition to the 1/12 scale electric belt vehicle series further enhances your outdoor experience. Kyosho’s long selling ‘Blizzard’ that has stood the test of time with a legion of loyal fans, has been used as a base for the new ‘Trail King’. Among its many features, a completely new body design creates the retro feel of a hard working machine. In addition to the realistic finish with separate accessory parts, the underbody incorporates a cockpit and always-on front and rear LED lights. A loading platform also provides space for a variety of things to be carried. The Trail King enhances the enjoyment of nostalgic wilderness experiences across a wide variety of scenes with a chassis boasting heavy-duty specifications for smooth and easy travel across any surface including uneven rocky roads and steep gradients. Take control with forward, reverse, left/right and the complete left/right pivot turning capability of a belt vehicle. As the model is fully pre-assembled, the advanced mechanics of the Trail King are ready to be enjoyed straight away. Compatibility with spare and optional parts for the Kyosho ‘Blizzard’ allows you to expand your enjoyment of the snow and sand adventures even further.   Technical datas ● Length　360mm ● Width　310mm ● Height　200mm ● Chassis Type　Chain drive ● Weight　1,610g (With attached battery) ● Motor　370size Brushed motor×2 ● Transmitter　KT-431S ● Receiver　KR-632   Ready set contents ● Completed chassis ● Completed chassis ● Transmitter(KT-431S) ● Receiver(KR-632) ● Battery for driving (KYOSHO SPEED HOUSE NiMH 2200) ● USB charger(Super plug type) ● Binding connector ● Tool(1.5mm Hex wrench)   Required for operations ● 4 x AAA batteries for the transmitter

3.995,-

Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Orange For 1/10 Crawler 'G6 Certified' Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to set up your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig that will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge that will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Include: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Note: The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination. Manual:

319,-

349,-

KJØP
-9%
Hovedbilde Absima 400CPS / 34WT Silicone Shock Oil 60ml
Absima 400CPS / 34WT Silicone Shock Oil 60ml
Features: Viscosity 400CPS / 34WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Hovedbilde Absima 650CPS / 51WT Silicone Shock Oil 60ml
Absima 650CPS / 51WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Absima 350CPS / 30WT Silicone Shock Oil 60ml
Absima 350CPS / 30WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 350. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Pro-Line 1012810 Hyrax 1.9
Pro-Line 1012810 Hyrax 1.9" G8 Rock Terrain Truck ...
This is a pair of pre-mounted Hyrax 1.9" Tires. The future of 1.9" TirePerformance has arrived with Pro-Line's all-new Hyrax Tire! Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything your Scale Adventure might throw at you. The Hyraxfeatures an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line's Legendary G8 material, so you know it provides performance you can depend on. The Hyrax 1.9" tire comes conveniently pre-mounted to our Impulse Black Plastic 1.9" wheels that are Proudly Made in the USA! These all-new Impulse wheels are designed to not only look scale but to be super easy to use by only requiring 6 screws per wheel for mounting tires. The unique 3-piece plastic wheel design bolts together in the back and locks on to Pro-Line's incredible list of 1.9" Crawling Tires. The back of this 12mm hex Rock Crawling 1.9" wheel also accepts Pro-Line's Brass Brake Rotor Weights (sold separately) for additional looks and performance. The overall wheel width and wheel offset are the same as Pro-Line's line of 1.9" Aluminum Pro-Forge Wheels, so you know they will fit your truck and look good doing it. Be the first on your block to get the Hyrax 1.9" tires mounted to Pro-Line's new 1.9" Black Impulse wheels. Height:   4.73" (120mm) Width:   1.76" (45mm)

649,-

699,-

KJØP
-7%
Hovedbilde Bronto JST female - 10cm 22AWG silikonkabel
Bronto JST female - 10cm 22AWG silikonkabel
Bronto JST female - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

29,-

KJØP
Hovedbilde Fuse Overgang - Male Traxxas til Female XT60
Fuse Overgang - Male Traxxas til Female XT60
Fuse Overgang - Male Traxxas til Female XT60

95,-

KJØP
Hovedbilde Bronto JST male - 10cm 22AWG silikonkabel
Bronto JST male - 10cm 22AWG silikonkabel
Bronto JST male - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

29,-

KJØP
Hovedbilde Hitec 54606s Aileron Extension 36
Hitec 54606s Aileron Extension 36"
This is a Heavy Duty 36" Servo Extension with                     Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer.              On one end of the wire is a male connector and on the                  other end of the wire is a female connector.   FEATURES: Gold-plated teminals improve conductivity and prevent oxidation for             longer lifespan.           Heavier, 20-gauge wire handles higher current loads.   INCLUDES: One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style             Connectors   SPECS:    Wire Gauge: 20           Wire Color Codes-             JR-                             Hitec-              Airtronics Z-             Brown:  ground      Black:  ground      Black: ground             Red:    positive    Red:    positive    Red:   positive             Orange: signal      Yellow: signal      Blue:  signal

65,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png