Traxxas

Fuse Overgang - Male Traxxas til Female XT60

Art.nr: FUSEW-113

95,-

Fuse

Fuse

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Fuse Overgang - Male Traxxas til Female XT60

Produsent

Fuse

Fuse

Kunder kjøpte også

Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W

Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W

SkyRC S100 Neo Computerlader AC100W/DC200W

SkyRC S100 Neo er ett godt valg for deg som ønsker en kompakt og kraftig lader. S100 Neo har en makseffekt vil gi deg muligheten for 100W lading med AC og 200W DC. Maks ladestyrke er 12A på XT60 porten. Laderen bruker tre knapper til manøvrering i menyene, har innebygget balanserer og XT60-type tilkoblingspunkter. Laderen har også en USB-C PD-port som gir deg muligeten til å lade mobil og andre dingser. Denne laderen er en multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen går på vanlig nettstrøm 220V, eventuelt på 6-30V DC. Det følger med 220V strømkabel, batterier med XT60-kontakt kobles direkte i XT60-utgang på laderen. Skal man lade batterier med annen type batteriplugg må overgang benyttes, dette må kjøpes løst. XH-balanseringsplugg plugges direkte i balanseringsutgangen på lader. Spesifikasjoner: Vekt 340gram Innspenning AC 100-240V Innspenning DC 6-30V Display 128x160p m/farge Størrelse 105xx105x62mm Antall celler LiPo 1-6 Antall celler NiMh/NiCD 1-15 Discharge 20W Maks Ladestyrke 0.1-12,0A Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Inkludert i eska: S100 Neo laderen, engelsk manual og 220V strømkabel.

699,-

799,-

-13%

Hovedbilde Fuse Overgang Female Traxxas til Male Deans

Fuse Overgang Female Traxxas til Male Deans

Fuse Overgang - Female Traxxas til Male Deans

59,-

Hovedbilde BSD 221R 1/10 GIANT RACER BUGGY BRUSHLESS

Hovedbilde BSD 221R 1/10 GIANT RACER BUGGY BRUSHLESS

BSD 221R 1/10 GIANT RACER BUGGY BRUSHLESS

BSD 221R BSD 1/10 GIANT RACER BUGGY BRUSHLESS RØD Meget tøff og solid 4WD buggy i skala 1/10. Dette er en “strukket” 1/10 buggy. Dvs. den er større enn en standard 1/10 bil. Dette er for å få frem de beste kjøreegenskapene. Det eneste du trenger er 4 stk AA-batterier for radio, samt lader. LiPO batteri medfølger. Giant Racer er en helt nyutviklet bil, med solid metallchassis og gjennomtenkte løsninger. Bilen kommer ferdigbygget med lakkert karosseri (fluoriserende rødt/sort eller fluoriserende gult/sort). Bilen leveres med en kraftig motor (brushless), innkapslet og sprutsikker Hobby Wing fartsregulator, buggy off-road dekk, oljedempere, kraftig og sprutsikker 9kg styreservo med metalldrev, kulelager, lukkede differensialer og sprutsikker mottaker. I esken er det: Komplett Giant Racer EB buggy, ferdigbygget 2.4GHz 2-kanals Rattradio 3200 mAh Gens Ace LiPO batteri

3.695,-

3.895,-

-5%

Hovedbilde Traxxas 10780 Differential Complete Front/Rear Mini ...

Traxxas 10780 Differential Complete Front/Rear Mini ...

Utgått fra Traxxas. Erstattet med følgende vare: 10780X Traxxas 10780 - Differential assembly (bevel gear), front or rear, complete (fits Mini Maxx®)

399,-

Hovedbilde Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber ...

Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber ...

Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber Sealed (2)

55,-

Hovedbilde Traxxas 10762 Pinion gear, differential (12/47 ratio) ...

Traxxas 10762 Pinion gear, differential (12/47 ratio) ...

Traxxas 10762 - Pinion gear, differential (12/47 ratio) (rear) (requires #10757 with either #10758 or 10760) Pinion Gear Diff Rear (Requires Center Diff/Slipper Clutch) Mini Maxx

79,-

Hovedbilde Traxxas 10758 Slipper clutch, complete (fits Mini ...

Traxxas 10758 Slipper clutch, complete (fits Mini ...

Traxxas 10758 - Slipper clutch, complete (fits Mini Maxx®) (requires #10757 & 10762) The Mini Maxx® slipper clutch comes completely assembled and ready to install in your truck with an included 47-tooth spur gear. When installing the slipper clutch, you must replace the standard driveshaft with a shorter 10757-series driveshaft and add the 10762 differential pinion gear.

269,-

289,-

-7%

Hovedbilde Traxxas 10757 Driveshaft Center (Requires Opt Center ...

Traxxas 10757 Driveshaft Center (Requires Opt Center ...

Traxxas 10757 - Driveshaft, center, plastic (requires #10762 with either #10758 or 10760) Use this short driveshaft when installing the optional 10758 slipper clutch or 10760 and 10760R center differentials. When using the short driveshaft, you must also use differential pinion gear 10762.

59,-

Hovedbilde Traxxas 5103A Ball bearings, black rubber sealed ...

Traxxas 5103A Ball bearings, black rubber sealed ...

Ball bearings, black rubber sealed (7x14x5mm) (2)

55,-

Hovedbilde Traxxas 5119A Ball bearings, black rubber sealed ...

Traxxas 5119A Ball bearings, black rubber sealed ...

Disse lagerene er samme størrelse som Tamiya 1510 Ball bearings, black rubber sealed (10x15x4mm) (2)

89,-

Hovedbilde Fuse Overgang - Male XT60 til Female Traxxas

Fuse Overgang - Male XT60 til Female Traxxas

Fuse Overgang - Male XT60 til Female Traxxas. 14AWG

95,-

Hovedbilde Bronto JST male - 10cm 22AWG silikonkabel

Bronto JST male - 10cm 22AWG silikonkabel

Bronto JST male - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

29,-

Hovedbilde Bronto JST female - 10cm 22AWG silikonkabel

Bronto JST female - 10cm 22AWG silikonkabel

Bronto JST female - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

29,-

Hovedbilde Hobbywing QuicRun Fusion Pro 2300kV w/ Integrated ESC ...

Hovedbilde Hobbywing QuicRun Fusion Pro 2300kV w/ Integrated ESC ...

Hobbywing QuicRun Fusion Pro 2300kV w/ Integrated ESC ...

Hobbywing Fusion Pro 2300KV Sensored Crawler Motor with built in ESC FOC - Integrated Power System for Crawlers Three Operating Modes: Normal - Forwards & reverse with brake Normal - Forward & reverse Constant Speed - Forward & reverse Features: The integrated design of the ESC and the motor greatly reduces the overall volume and weight, and makes the layout and wiring of car frame simpler and more convenient. The FOC driving mode, low speed torque is strong. Smooth running at extreme low speed, which is far superior to the common sensored brushless power system, even better than the brushed power. Thanks to the sine wave driving mode, the whole system has high efficiency, small heat, and effectively extends the endurance time; and the motor runs more quietly and soft. The protection grade of the whole system is IP67, with excellent waterproof and dustproof performance. Under various weather conditions, the whole system can easily deal with the complex road surface containing silt, ice and snow, and water. Intelligent torque output and speed closed-loop control, fully experience the cruise control and steep slope slow descent function of 1:1 vehicle, making the control handy. Active drag brake force adjustment, providing unprecedented parking capacity on slope. With strong built-in switch mode BEC, the continuous current is up to 6A, and support switch between 6V and 7.4v, easy to drive various powerful steering servo and high-voltage steering servo. Multiple protection functions: battery low voltage protection, overheat protection, throttle lost protection, lock-up protection. It supports LED program box to set ESC parameters, and has independent parameter setting interface, which is integrated on electronic switch, making setting parameters more convenien Specifications: Type: 1/10, Brushless, Sensored, Waterproof Cont./Peak Current: 60A/200A Input Voltage: 2-3S Lipo/6-9 Cell NiMH BEC Switch Mode: 6V/7.4V，6A Motor KV: 2300 Diameter: 37mm Length: 58mmm Shaft diameter: 3.175mm Shaft Length: 16mm Motor Poles: 4 Input Wires: 14AWG / 330mm Input Connector: XT60 SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Independent programming interface (switch position) Firmware Upgrade: Not Supported Size: 37x58mm Weight: 209g (including wires & connectors) Application: 1/10 crawlers

1.895,-

1.995,-

-5%

Hovedbilde Pro-Line 1012810 Hyrax 1.9

Pro-Line 1012810 Hyrax 1.9" G8 Rock Terrain Truck ...

This is a pair of pre-mounted Hyrax 1.9" Tires. The future of 1.9" TirePerformance has arrived with Pro-Line's all-new Hyrax Tire! Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything your Scale Adventure might throw at you. The Hyraxfeatures an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line's Legendary G8 material, so you know it provides performance you can depend on. The Hyrax 1.9" tire comes conveniently pre-mounted to our Impulse Black Plastic 1.9" wheels that are Proudly Made in the USA! These all-new Impulse wheels are designed to not only look scale but to be super easy to use by only requiring 6 screws per wheel for mounting tires. The unique 3-piece plastic wheel design bolts together in the back and locks on to Pro-Line's incredible list of 1.9" Crawling Tires. The back of this 12mm hex Rock Crawling 1.9" wheel also accepts Pro-Line's Brass Brake Rotor Weights (sold separately) for additional looks and performance. The overall wheel width and wheel offset are the same as Pro-Line's line of 1.9" Aluminum Pro-Forge Wheels, so you know they will fit your truck and look good doing it. Be the first on your block to get the Hyrax 1.9" tires mounted to Pro-Line's new 1.9" Black Impulse wheels. Height: 4.73" (120mm) Width: 1.76" (45mm)

649,-

699,-

-7%

Hovedbilde Hobbywing Program Card for Car ESC

Hobbywing Program Card for Car ESC

OBS: Dette er G2-utgaven. Sjekk at denne passer mot din ESC. Overview This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It’s compact, portable and very applicable for field use. It works with the following HobbyWing products: 1. Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs. 2. XeRun series (not all), EzRun series & QuicRun series of brushless car ESCs. 3. SeaKing series of brushless boat ESCs. Specifications Size：88x58x14mm（LxWxH） Weight：40g Input Voltage: 4.8V—8.4V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)

175,-

Hovedbilde Yeah Racing TRX4-015RD Stainless Steel Front & Rear ...

Hovedbilde Yeah Racing TRX4-015RD Stainless Steel Front & Rear ...

Yeah Racing TRX4-015RD Stainless Steel Front & Rear ...

Yeah Racing Stainless Steel Front & Rear Center Shaft Set Red (Ver.2) For Traxxas TRX-4 TRX-6 Upgrade for people who like to run their Traxxas TRX-4 on extreme terrain, stainless steel center driveshafts which largely reduces the chance of plastic driveshafts snapping. Features a locking ring which provides extra durability and also introduces the possibility of replacing the ring when it's worn out only and not the entire driveshaft. This also results in a much more scale representation of real life driveshafts found in Crawlers. Features: For: Traxxas TRX-4 Defender & Bronco Material: Stainless Steel & Aluminum Color: Red / Silver Includes: Stainless Steel Driveshafts (2 pcs)

439,-

469,-

-6%

Hovedbilde Vapex Li-Po Battery 2S 7,4V 350mAh 20C JST-RCY (BEC)

Vapex Li-Po Battery 2S 7,4V 350mAh 20C JST-RCY (BEC)

Suitable for: FMS Airplanes etc Battery: 2S 7.4V 350mAh LiPo 20C Max Discharge: 7A Continuous / 14A Burst Charge: Max 3C/1.05A (fast) Connector: JST-RCY (BEC) Balance Connector: XH Length: 45.5 mm Width: 25 mm Height: 11.5 mm Weight: 25 g

109,-

Hovedbilde Radient 010115 BATTERY ADAPTER, DEANS (HCT) MALE TO ...

Radient 010115 BATTERY ADAPTER, DEANS (HCT) MALE TO ...

BATTERY ADAPTER, DEANS (HCT) MALE TO XT60 FEMALE

49,-

Hovedbilde Traxxas 5641 Pinion Gear 11T 32P (5mm axle)

Traxxas 5641 Pinion Gear 11T 32P (5mm axle)

Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

69,-

Hovedbilde Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

89,-

99,-

-10%

Hovedbilde Yeah Racing TRX4-015BK Stainless Steel Front & Rear ...

Hovedbilde Yeah Racing TRX4-015BK Stainless Steel Front & Rear ...

Yeah Racing TRX4-015BK Stainless Steel Front & Rear ...

Yeah Racing Stainless Steel Front & Rear Center Shaft Set Black (Ver.2) For Traxxas TRX-4 TRX-6 'G6 Certified' Description: Upgrade for people who like to run their Traxxas TRX-4 on extreme terrain, stainless steel center driveshafts which largely reduces the chance of plastic driveshafts snapping. Features a locking ring which provides extra durability and also introduces the possibility of replacing the ring when it's worn out only and not the entire driveshaft. This also results in a much more scale representation of real life driveshafts found in Crawlers. Feature: For: Traxxas TRX-4 Defender & Bronco Material: Stainless Steel & Aluminum Color: Black / Silver Include: Stainless Steel Driveshafts (2 pcs)

439,-

469,-

-6%

Hovedbilde Yeah Racing TRX4-044 Brass 117g Front Bumper & Servo ...

Hovedbilde Yeah Racing TRX4-044 Brass 117g Front Bumper & Servo ...

Yeah Racing TRX4-044 Brass 117g Front Bumper & Servo ...

Brass 117g Front Bumper & Servo Mount For Traxxas TRX-4 Description: Add weight and strength to the front of your Traxxas TRX-4 brass bumper mount, which serves as another point for mounting your servo for either a front battery tray mod or more! *Photos for reference only. Feature: For: Traxxas TRX-4 Material: Brass Color: Brass Include: Brass 117g Front Bumper (1 pc) Mounting Hardware (1 pack)

429,-

459,-

-7%

Hovedbilde Traxxas 8288 Ring- & Piniondrev Differential ...

Traxxas 8288 Ring- & Piniondrev Differential ...

Traxxas TRX-4 Machined Underdrive Ring & Pinion Gear (10/35T) CNC The Traxxas TRX-4 Machined Underdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is underdriven compared to the stock gear ratio, meaning it will provide reduced wheelspeed. This gear is more durable than the stock parts and is better suited to high power ESC/Motor systems. Package includes one 35T ring gear and one 10T pinion gear. A popular tuning option is to overdrive the front axle, and underdrive the rear axle. This can be achieved using a variety of gear combinations. You can run standard in the front, and underdrive in the rear, overdrive in the front and standard in the rear - or for the most dramatic impact, run overdrive in the front and underdrive in the rear. See option list below. Machined Gear Options: Underdrive: 428288 Standard: 428279R Overdrive: 428287

549,-

569,-

-4%

Hovedbilde Traxxas 8223 Battery Plate and Straps

Traxxas 8223 Battery Plate and Straps

Battery plate/ battery strap/ 3x8 flathead screws (4) (requires #8072 inner fenders)

69,-