Hopp til innhold

Radient 010115 BATTERY ADAPTER, DEANS (HCT) MALE TO XT60 FEMALE

Art.nr: RDNAC010115

49,-

Modelsport AS

Modelsport AS

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

BATTERY ADAPTER, DEANS (HCT) MALE TO XT60 FEMALE

Produsent

Kunder kjøpte også

Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 2s Ledning 22AWG Lengde 20cm

39,-

KJØP
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med T-plug til XT60-plugger. Benyttes for lading av batterier med T-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 T-Plugg (også kjent som Deans)

79,-

KJØP
Traxxas 2821-PORT - iD® Charging Port for TRX-4M® Batteries For use with EZ-Peak® iD Chargers - Cut Charging Time in Half! Charge 2821 batteries up to 2X faster than the TRX-4M included charger Access all the features of EZ-Peak iD Chargers including storage charge Allows compatibility with all EZ-Peak iD multi-chemistry chargers Check cell voltage and monitor charging in real-time with EZ-Peak Live chargers and the EZ-Peak Live app Full-Featured iD Charging Convenience for TRX-4M Introduce TRX-4M owners to the world of EZ-Peak charging convenience. 2-amp charging port designed for the TRX-4M 2821 750mAh LiPo battery Charge up to twice as fast as the stock TRX-4M USB charger with the advanced circuitry of the EZ-Peak lineup Access Balance, Fast, or Storage modes Check cell voltage with EZ-Peak Live and EZ-Peak Live Dual and the EZ-Peak Live mobile app Easily connects the TRX-4M battery to EZ-Peak chargers with iD iD convenience and EZ-Peak features for TRX-4M owners *Cell voltage check and charge monitoring require EZ-Peak Live or EZ-Peak Live Dual charger and the EZ-Peak Live app.

139,-

149,-

KJØP
-7%
Traxxas 750mAh 7.4V 2-Cell 20C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Replacement part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

259,-

279,-

KJØP
-7%
1 meter rød silikonkabel 1 meter svart silikonkabel Bronto silikonledning av høy kvalitet. Leveres i pakning med 1 meter rød og 1 meter svart.   Spesifikasjoner   AWG 14 Diameter 1.63mm Areal 2.08mm2 PS! Vær oppmerksom på at vi har samme produktbilde på alle ledningstykkelser, og at produktutseendet derfor vil avvike noe fra bildet.

75,-

KJØP
Red & Black Shrink Tube Set - D4mm/W6mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 4mm Width (laid flat): 6mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

19,-

KJØP
NB! Denne laderen leveres uten ladekabel. Se lengere nede under:  Relaterte produkter. SkyRC T100 Twin-Channel (2x50W) 240VAC Charger Multi-purpose for Most Chemistries With Generic XT60 SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports. It is not only compact in size but also powerful in output with maximum 100W charging power and 5A charging current which makes charging more sufficient. With the new AGM and cold charge modes, the user is free to charge their PB and AGM batteries in cold days. Twin-channel Charger SkyRC T100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically initiate the charging of 2 batteries at once to their maximum capacity. To top it all, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (NiMH / NiCd / LiPo / LiFe / Lilon / LiHV / Pb) batteries into any of the charging ports.   T100 Specifications: Input Voltage: 100-240VAC (50/60Hz) Power: 2x50W Output Charge Connector: XT60 Output Balance Connector: XH Weight: 500g Size: L90 x W100 x H127 mm Battery Voltage Detection: Yes Anti-Reverese Protection: Yes Short Circuit Protection: Yes Over Current Protection: Yes Beep Sound on Buttons/Alarm: Yes on/off Working Enviroment Temperature: 0-40°C Working Enviroment Humidity: 0-80% Storage Enviroment Temperature: -10-60°C Storage Enviroment Humidity: 20-70% Battery Types: Output Socket: XT60 (XT60 batteries can be connected directly - all other needs an charge lead) NiMH/NiCd: 6-8 cells (7.2-9.6V) Pb: 6/12V LiHV/LiPo/LiIon/LiFe: 2-4 cells Output Current: NiMH/NiCd: 0.1-5A LiHV/LiPo/LiIon/LiFe: 0.1-5A Pb: 0.8-5A Balance: Max 300mA Trickle NiCd/NiMH: 50-300mA & off Operation Modes - NiCd/NiMH: Charge Re-Peak: 1-3 times Operation Modes - LiHV/LiPo/LiIon/LiFe: Balance Charge Storage Operation Modes - Pb: Pb Normal Charge Pb AGM Charge Pb Cold Charge

749,-

799,-

KJØP
-6%
This a multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting 1/24 scale model cars. The width of clips can also be adjusted to obtain the most stable hold. Both body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free.

269,-

KJØP
Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 800. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 550. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 700. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Features: Viscosity 600CPS / 48WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Features: Viscosity 750CPS / 57WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Yeah Racing Aluminum Big Bore Go 70mm Damper Set 2pcs for 1/10 RC Offroad Buggy Black Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (2 pcs) Soft Springs - Red (2 pcs) Medium Springs - Yellow (2 pcs) Hard Springs - Blue (2 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

319,-

349,-

KJØP
-9%
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

KJØP
-8%
Reflex Stick Multi Pro LCD Professional, modern and technically high-quality. 14-Channel remote control system with 15 model memories for universial use in many RC vehicles and vessels. You controll these 14 channels independently by the means of 2 control sticks and 10 switches, which has many uses, such as light, sound, horn, winch, support legs, water pump and water monitor, to name a few. The Reflex Steck Multi Pro 14 channel LCD System is fully compatible with Tamiya multi-functionunits for Trailers, and Tamiya DMD units. Specs: Operating voltage transmitter: 4.8-6V (4 AA batteries) 2.4G FHSS-System (Frequency-hopping spread spectrum) 2.4G servo reverse (reversal of running direction) and trimming function for channels. 4x button ON/OFF/ON, 4x switch ON/OFF/ON, 2x rotary potentiometer Power supply to the receiver: 4.8-6V Plug system Graupner J/R Dual rate for steering (path limitation of the servos EPA (servo travel limit) ABS function EXP (exponential) failsafe function What`s in the package: 1x 14 channel transmitter 1x 14 channel receiver 1x manual

1.895,-

2.595,-

KJØP
-27%
Kvalitets NiMh pakke med meget høye utladingsegenskaper! 7.2v 3300mah Standard StickPack NiMh med T-Plugg/Deans 3300mAh 7,2V Nimh batteri som passer i de fleste rc-produkter som benytter standard stick pakker, slik som bil, båt, fly, startere m.m Leveres med Dean/T-kontakt, skal det brukes på ett produkt med annen batterikobling kan overgang benyttes. Lengde 136mm Bredde 46.6mm Høyde 24.2mm Vekt 420gram inkludert ledning og plugg

299,-

319,-

KJØP
-6%
KJØP
EzRun 3652 G3 Brushless Motor 4100KV IP67 2-3S LiPo 1/10 Sensorbasert børsteløs motor som blant annet passer 1/10-biler. Denne ESCen skal brukes på 2-3S LiPo. Anbefales i bruk sammen med Hobbywin MAX10 G2 ESC. Leveres med ferdigloddet gullkontakter. Spesifikasjoner Akseldiameter 3.175mm Diameter 37mm Lengde 53mm Vekt 228g KV 4100   The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.   Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8”) Weight: 228g Front Bearing: D13xD5xT4mm Rear Bearing: D11xD5xT5mm Applications: 1/10; On-road/Off-road, Short Course Truck (Light-duty)

849,-

895,-

KJØP
-5%
Hobbywing 30102604 EzRun Max10 G2 80A Brushless ESC 2-3S 80A 2-3S kompatibel Designet for 1/10 biler Hobbywing EzRun Max10 G2 er vannbestandig og leveres med ferdig påloddet motorkontakter (4mm female gullkontakt) og XT60 batterikontakt. Regulatoren er kompatibel med 2-3s LiPo. Motorvalg 2S LiPo: 3652-opp til 6000KV 3S LiPo: 3652-opp til 4200KV   Spesifikasjoner Størrelse 53 x 39.5 x 37,2mm Vekt 120g Batterikontakt XT60 Type Børsteløs & Sensor/Sensorløs Innspenning 2-3S LiPo BEC 6V/7.4V (kontinuerlig spenning 5A)   Hobbywing Ez-Run Max10 G2 80A ESC (for EzRun 3652SD/3665SD G3 Motors) Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Smart technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. *Patented frameless fan New technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 80/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate Applications: 1/10 Vehicles: Buggy & Short Course Tryucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor

939,-

999,-

KJØP
-6%
Flysky FS-G7P+ 10 channel Radio Set with 1 Receiver   Now as the G7P+ with the ultimate upgrade: 10 channels based on the ANT protocolthe consistent evolution of the popular G7P for RC cars and boats. Compared to the G7P, the Plus version adds more channels including the FS-R11P receiver, an optimized user interface, and doubled model memory of 512KB. The high-performance chip with increased memory capacity enables future upgrades, while the new high-density foam competition steering wheel grip provides precision and comfort. All settings can be conveniently adjusted via the clear LCD display. Features: 10 channels for complex vehicle setups (ANT protocol) Optimized UI û context-sensitive menu items appear as needed 128 x 64 LCD display Type-C data port for direct connection and online updates Comfortable high-density foam steering wheel grip Long range ≥300 m (ground, unobstructed) Specifications: Transmitter Model: FS-G7P+ Frequency / Protocol: 2.4 GHz ANT Channels: 10 Channel resolution: 4096 Range (ground): ≥300 m Display: 128×64 px LCD (monochrome dot-matrix) Antenna type: Built-in coax single antenna Power supply: 4× AA (1.5 V) or 2S LiPo (JST) Low-voltage warning: <4.2 V (AA) / <7.2 V (2S LiPo) Data interface: USB Type-C (update/data) Dimensions: 136,4 × 111,8 × 197,5 mm Weight: 305 g Temperature / Humidity: −10 °C to 60 °C / 20% to 90% Compatible models: Car, Boat Firmware update: Supported Receiver Model: FS-R11P (standard in set) Protocol: ANT Channels / Outputs: Up to 11 PWM outputs (full PWM use without expander) Compatible transmitters/receivers: All FlySky transmitters with ANT support Included: FlySky "G7P+" transmitter 1× Receiver: FS-R11P Manual

1.295,-

1.495,-

KJØP
-13%
This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Flat White).                      For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-2 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Flat White) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

KJØP
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Red Brown Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Desert (Dark) Yellow paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png