Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Hitec Servoer / Hitec HSB-9380TH Ultra-Torque Brushless Ti Gear Servo
-11%

Hitec HSB-9380TH Ultra-Torque Brushless Ti Gear Servo

Art.nr: 39380S

2.395,-

2.695,-

- 11%
Hitec

Hitec
På lager: 4

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Hitec HSB-9380TH Ultra Torque Brushless Servo.

 

 


FEATURES

Ideal for large planes, 1/8 and 1/5 scale on and off-road vehicles
 Titanium gear train with dual ball bearings
 Ultra hard gear shaft with three axial metal bushings
 Hybrid MPD first gear
 Low current consumption
 Programmable 12-Bit resolution digital circuit
 25 tooth standard spline
 Water and dust resistant

 


INCLUDES

HSB-9380TH High-Speed Brushless Servo, with 3x8mm Horn Screw
 0.94"(24mm) Single Arm
 1.3" (33mm) Single Arm
 2.1" (54.5mm) Single Arm
 1.7" (44mm) Double Arm
 2.8" (72mm) Double Arm
 4.3" (110mm) Double Arm
 1.4" (36mm) diameter Round Arm
 1.5" (38mm) diameter Four Point Horn
 Four each Grommets, Eyelets and Screws

 


SPECIFICATIONS

6.0V 7.4V
 Speed: 0.17 0.14
 Torque: 472 oz-in (34.0 kg-cm) 472 oz-in (34.0 kg-cm)
 Dimensions: 1.57 x 0.79 x 1.50" (40.0 x 20.0 x 38mm)
 Weight: 2.40oz (68g)

Produsent

Hitec

Hitec

Kunder kjøpte også

Hovedbilde Traxxas 1654X Wheel Hubs Aluminum (2)
Traxxas 1654X Wheel Hubs Aluminum (2)
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

På lager 1
KJØP
Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator
Castle Creations CC BEC 10A 6S Switching Regulator
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

** Ikke på lager
KJØP
-11%
Hovedbilde RC4WD 0407 12mm Mini Hex Wheel Widener Set (+15mm)
RC4WD 0407 12mm Mini Hex Wheel Widener Set (+15mm)
 This is a package of RC4WD Mini 12mm Wheel Wideners. FEATURES: Widens each side of truck by (15mm)           CNC machined aluminum construction           Stainless steel mini barrel nut           Compatible with any 12mm hex wheels such as those used on the             Tamiya  F-350, Tundra, Jeep, Axial AX10, Losi Crawler, RC4WD             Timberwolf and Bully   INCLUDES: Four RC4WD Mini 12mm Wheel Wideners           Four Barrel Nuts           Eight Washers   Specifications: CNC Machined Widener Stainless Steel mini Barrel Nut Widen 15mm each side of the Truck OD: 0.51 in / 13 mm Width: 0.04 in / 1.1 mm Internal Diameter: 0.24 in / 6.2 mm

399,-

På lager 1
KJØP
Hovedbilde Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420 Hovedbilde Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420
Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420
The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Specifications Scale: 1/14 Length: 17.32 inches (440mm) Width: 7.40 inches (188mm) Wheelbase: 10.71 inches (272mm) Front Tread: 6.14 inches (156mm) Rear Tread: 5.43 inches (138mm) Weight: 5.07 lbs. (2300g) Chassis: Aluminum ladder Suspension: Solid Axle Damper Type: Metal friction Drive Train: Gearbox (3-speed) Gear Ratio: 10.6:1 - With the 3-speed gearbox, 10.6:1, 17.7:1 and 32.4:1 are possible Differential Type: Bevel Gear Engine: Electric 540 Wheels & Tires: Chrome/Radial Body Type: Styrene(plastic) Radio Control Unit: (not included) Can be operated with a 2-channel radio but a 4-channel system is recommended for potential future options. Battery: Requires a 7.2V battery and charger   Spare Parts & Hop Up Options 56501 - Tractor truck electrical unit set 56503 - Tractor truck oil shocks 56507 - Telescopic antenna 56508 - Truck aluminum front wheels (1 pair) 56509 - Truck aluminum rear wheels (1 pair) 56510 - Tractor truck sound effects set

4.395,-

4.695,-

På lager 2
KJØP
-6%
Hovedbilde Axial 24259 AE-2 Forward/Reverse ESC w/Drag Brake
Axial 24259 AE-2 Forward/Reverse ESC w/Drag Brake
This is the AE-2 Forward/Reverse Esc with Drag Brake. FEATURES: Forward, Reverse and Drag Brake Function           Preinstalled motor leads and Tamiya type battery connector           Universal receiver connector           Programmable using the Castle Creations Castle           LiPo cutoff set up from factory INCLUDES: AE-2 Forward/Reverse ESC with Drag Brake           Instruction sheet REQUIRES: Installation on the Rock Crawler SPECS:    Input Voltage: 6 cell Nickel/2S Lipo           Dimensions: 1.7 x 1.24" (43.2 x 34.5)           Weight: 1.6oz (45g)           Motor: 19T or greater           On-Resistance FET: 0.0018ohms           Rated/Peak Current: 106A Peak           Braking Current: 106A           BEC Voltage/A: DC 5V/2A           PWM Frequency: 6K Hertz

1.095,-

1.295,-

På lager 9
KJØP
-15%
Hovedbilde Axial 30835 Aluminum Servo Horn 24T
Axial 30835 Aluminum Servo Horn 24T
This is the Axial 24T Aluminum Servo Horn for Hitec Servos. FEATURES: Hard anodized aluminum construction           Compression mount, two screws install on either side of arm and             tighten center hole around servo spline INCLUDES: Axial 24T Aluminum Servo Horn with two Socket Head Screws SPECS:    Length: 0.94" (24mm) from center of servo mounting hole to end of arm

239,-

På lager 2
KJØP
Hovedbilde RC Led Light Kit For Cars And Trucks(12Lights)
RC Led Light Kit For Cars And Trucks(12Lights)
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

** Ikke på lager
KJØP
-8%
Hovedbilde RC4WD E0044 Brushed 55T Boost Rebuildable Crawler 540 ...
RC4WD E0044 Brushed 55T Boost Rebuildable Crawler 540 ...
This is the 540 size 55T Brushed Boost Crawler Motor from RC4WD.     FEATURES Built for crawler, scalers, trial trucks, competition and more  Completely rebuildable  Adjustable timing  Dual precision ball bearings  Stand-up brushes with aluminum screw-in heat sinks  Machine wound armature   INCLUDES 55T Brushed Boost Crawler Motor  16AWG Motor Leads with Connectors   SPECIFICATIONS  Can Length: 2.08" (52.9mm)  Can Diameter: 1.4" (36mm)  Shaft Length: 0.51" (13mm)  Shaft Diameter: 0.12" (3.15mm)

579,-

599,-

På lager 1
KJØP
-3%
Hovedbilde RC4WD K0052 Beast II 6x6 Truck Kit Hovedbilde RC4WD K0052 Beast II 6x6 Truck Kit
RC4WD K0052 Beast II 6x6 Truck Kit
            Are you ready for the end of days? The opportunities are limitless with the Beast II truck kit. Sunday driver to world domination. Its up to the imagination to complete your Beast II. 
The Beast II has unmatched scale detail, allowing for a realistic model, or a true performance oriented 6x6 trail truck. 
The Beast II is built with engineering and design first. Packed with great products like the R3 2 speed transmission, Yota II axles, Triton transfer case, Mil-Spec ZXL tires, and 1.9 Humvee beadlock wheels. There are no better options! Beast II... What's in store for you? Custom Designed for True to Scale Looks Realistic Aluminum Ladder Frame Chassis R3 Scale 2 Speed  transmission Center Mounted Realistic 4x4 Transfer Case Cast Metal Axles with Locked Differentials 3 Link front and 8 Link rear suspension Humvee 1.9 Internal Beadlock Wheel MIL-SPEC ZXL 1.9 Tires Chassis mounted Steering servo Dual Spring 80mm Scale Black Shocks NB!! Vi anbefaler dette verktøysettet fra MIP         når du skal sette sammen bilen.

9.495,-

9.995,-

På lager 1
KJØP
-5%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png