Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Børste motor / RC4WD E0044 Brushed 55T Boost Rebuildable Crawler 540 Motor
-3%

RC4WD E0044 Brushed 55T Boost Rebuildable Crawler 540 Motor

Art.nr: E0044

579,-

599,-

- 3%
RC4WD

RC4WD
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 540 size 55T Brushed Boost Crawler Motor from RC4WD.

 

 


FEATURES

Built for crawler, scalers, trial trucks, competition and more
 Completely rebuildable
 Adjustable timing
 Dual precision ball bearings
 Stand-up brushes with aluminum screw-in heat sinks
 Machine wound armature

 


INCLUDES

55T Brushed Boost Crawler Motor
 16AWG Motor Leads with Connectors

 


SPECIFICATIONS

 Can Length: 2.08" (52.9mm)
 Can Diameter: 1.4" (36mm)
 Shaft Length: 0.51" (13mm)
 Shaft Diameter: 0.12" (3.15mm)

Produsent

RC4WD

RC4WD

Kunder kjøpte også

Hovedbilde Savox SW-0231MG PLUS Waterproof 0.17 speed/15kg. Metal ... Hovedbilde Savox SW-0231MG PLUS Waterproof 0.17 speed/15kg. Metal ...
Savox SW-0231MG PLUS Waterproof 0.17 speed/15kg. Metal ...
SAVÖX SW-0231MG-PLUS - Water Proof Metal-Geared Standard-Sized Servo The SW-0231MG-PLUS is a budget friendly, waterproof, high torque, digital servo in a slightly taller case than most standard sizes. This is a great upgrade if your looking to drive your RC vehicle in any condition yet unable to use higher voltage to obtain more power. Features: New: Soft Start New: sanwa SSR compatible Strong metal gear train for added durability Waterproof case design (IP67) Ideal for cars, truck, and boats subject to water or snow Slightly taller case design Specifications: Torque @ 6V -20kg/cm Torque @ 7.4V - 25kg/cm Speed @ 6V - 0.17 sec/60 deg Speed @ 7.4V - 0.15 sec/60 deg Dimensions L x W x H: 41.8 x 20.2 x 42.9mm Weight: 66g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 100mA @4.8V, 120mA @6.0V Stall Current (at locked): 3800mA @4.8V, 4800mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

599,-

629,-

KJØP
-5%
Hovedbilde Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420 Hovedbilde Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420
Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420
The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Specifications Scale: 1/14 Length: 17.32 inches (440mm) Width: 7.40 inches (188mm) Wheelbase: 10.71 inches (272mm) Front Tread: 6.14 inches (156mm) Rear Tread: 5.43 inches (138mm) Weight: 5.07 lbs. (2300g) Chassis: Aluminum ladder Suspension: Solid Axle Damper Type: Metal friction Drive Train: Gearbox (3-speed) Gear Ratio: 10.6:1 - With the 3-speed gearbox, 10.6:1, 17.7:1 and 32.4:1 are possible Differential Type: Bevel Gear Engine: Electric 540 Wheels & Tires: Chrome/Radial Body Type: Styrene(plastic) Radio Control Unit: (not included) Can be operated with a 2-channel radio but a 4-channel system is recommended for potential future options. Battery: Requires a 7.2V battery and charger   Spare Parts & Hop Up Options 56501 - Tractor truck electrical unit set 56503 - Tractor truck oil shocks 56507 - Telescopic antenna 56508 - Truck aluminum front wheels (1 pair) 56509 - Truck aluminum rear wheels (1 pair) 56510 - Tractor truck sound effects set

4.395,-

4.695,-

KJØP
-6%
Hovedbilde Axial 24259 AE-2 Forward/Reverse ESC w/Drag Brake
Axial 24259 AE-2 Forward/Reverse ESC w/Drag Brake
This is the AE-2 Forward/Reverse Esc with Drag Brake. FEATURES: Forward, Reverse and Drag Brake Function           Preinstalled motor leads and Tamiya type battery connector           Universal receiver connector           Programmable using the Castle Creations Castle           LiPo cutoff set up from factory INCLUDES: AE-2 Forward/Reverse ESC with Drag Brake           Instruction sheet REQUIRES: Installation on the Rock Crawler SPECS:    Input Voltage: 6 cell Nickel/2S Lipo           Dimensions: 1.7 x 1.24" (43.2 x 34.5)           Weight: 1.6oz (45g)           Motor: 19T or greater           On-Resistance FET: 0.0018ohms           Rated/Peak Current: 106A Peak           Braking Current: 106A           BEC Voltage/A: DC 5V/2A           PWM Frequency: 6K Hertz

1.095,-

1.295,-

KJØP
-15%
Hovedbilde Axial 30835 Aluminum Servo Horn 24T
Axial 30835 Aluminum Servo Horn 24T
This is the Axial 24T Aluminum Servo Horn for Hitec Servos. FEATURES: Hard anodized aluminum construction           Compression mount, two screws install on either side of arm and             tighten center hole around servo spline INCLUDES: Axial 24T Aluminum Servo Horn with two Socket Head Screws SPECS:    Length: 0.94" (24mm) from center of servo mounting hole to end of arm

239,-

KJØP
Hovedbilde RC Led Light Kit For Cars And Trucks(12Lights)
RC Led Light Kit For Cars And Trucks(12Lights)
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

KJØP
-8%
Hovedbilde RC4WD K0052 Beast II 6x6 Truck Kit Hovedbilde RC4WD K0052 Beast II 6x6 Truck Kit
RC4WD K0052 Beast II 6x6 Truck Kit
            Are you ready for the end of days? The opportunities are limitless with the Beast II truck kit. Sunday driver to world domination. Its up to the imagination to complete your Beast II. 
The Beast II has unmatched scale detail, allowing for a realistic model, or a true performance oriented 6x6 trail truck. 
The Beast II is built with engineering and design first. Packed with great products like the R3 2 speed transmission, Yota II axles, Triton transfer case, Mil-Spec ZXL tires, and 1.9 Humvee beadlock wheels. There are no better options! Beast II... What's in store for you? Custom Designed for True to Scale Looks Realistic Aluminum Ladder Frame Chassis R3 Scale 2 Speed  transmission Center Mounted Realistic 4x4 Transfer Case Cast Metal Axles with Locked Differentials 3 Link front and 8 Link rear suspension Humvee 1.9 Internal Beadlock Wheel MIL-SPEC ZXL 1.9 Tires Chassis mounted Steering servo Dual Spring 80mm Scale Black Shocks NB!! Vi anbefaler dette verktøysettet fra MIP         når du skal sette sammen bilen.

9.495,-

9.995,-

KJØP
-5%
Hovedbilde Hitec HSB-9380TH Ultra-Torque Brushless Ti Gear Servo
Hitec HSB-9380TH Ultra-Torque Brushless Ti Gear Servo
This is the Hitec HSB-9380TH Ultra Torque Brushless Servo.     FEATURES Ideal for large planes, 1/8 and 1/5 scale on and off-road vehicles  Titanium gear train with dual ball bearings  Ultra hard gear shaft with three axial metal bushings  Hybrid MPD first gear  Low current consumption  Programmable 12-Bit resolution digital circuit  25 tooth standard spline  Water and dust resistant   INCLUDES HSB-9380TH High-Speed Brushless Servo, with 3x8mm Horn Screw  0.94"(24mm) Single Arm  1.3" (33mm) Single Arm  2.1" (54.5mm) Single Arm  1.7" (44mm) Double Arm  2.8" (72mm) Double Arm  4.3" (110mm) Double Arm  1.4" (36mm) diameter Round Arm  1.5" (38mm) diameter Four Point Horn  Four each Grommets, Eyelets and Screws   SPECIFICATIONS 6.0V 7.4V  Speed: 0.17 0.14  Torque: 472 oz-in (34.0 kg-cm) 472 oz-in (34.0 kg-cm)  Dimensions: 1.57 x 0.79 x 1.50" (40.0 x 20.0 x 38mm)  Weight: 2.40oz (68g)

2.395,-

2.695,-

KJØP
-11%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png