Hopp til innhold

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

 
Art.nr: TRX 1529
Copied
Outdrive housing/ propeller shaft/bushings (self-lubricating) (2)

39,-

KJØP
Art.nr: TRX 1529X
Copied
Propeller shaft (1), for 3/16" ID propellers/ drive dog (1)/ 4.0 GS (1)/ 4x8mmTW (2)/ 4.0 NL (1). (2 sets req. for Villain EX) 3/16" PROP SHAFT: The 1529X prop shaft uses a 4mm shaft with a drive dog and 3/16 threads to install aftermarket beryllium or aluminum props. Typical aftermarket props from manufacturers such as Octura, Graupner, and Prather use the standard 3/16 thread size for props that will fit the Nitro Vee. Two of these are required for the Villain IV and Villain EX. Also works great on the Blast and Nitro Vee (only one required).

85,-

KJØP
Art.nr: TRX 1531
Copied
Trim adjustment bracket (inner)/trim adjustment bracket (outer)/trim adjustment lever/ 3x16mm shoulder screw/2.6x 10mm self-tapping screws (4)/convex and concave trim lever washers/4x21mm double shoulder screw/brass washers/ nuts

59,-

KJØP
Art.nr: TRX 1539
Copied
U-joints (2)/ 3mm set screws (4)

59,-

KJØP
Art.nr: TRX 1540
Copied
Rubber grommets for steering rod (2)

39,-

KJØP
Art.nr: TRX 1541
Copied
Servo rod connectors (2)/ 3mm set screws

59,-

KONTAKT
Art.nr: TRX 1547
Copied
Bushings, self-lubricating (10) (marine drive system)

39,-

KJØP
Art.nr: TRX 1548
Copied
These are the Traxxas 3x4mm and 4x4mm Set Screws. FEATURES: Constructed of steel           Also known as grub screws INCLUDES: Eight 3x4mm set screws in black.           Four 4x4mm set screws finished in natural finish. REQUIRES: 2mm hex wrench for 4x4mm screws           1.5mm hex wrench for 3x4mm screws COMMENTS: For use in Traxxas kits or any application requiring these size set             screws.

29,-

KJØP
Art.nr: TRX 1549
Copied
Washers, PTFE-coated 4x6x.5mm

29,-

KJØP
Art.nr: TRX 1552
Copied
These are replacement motor screws and washers for any 05 size motor. Features: 6 3x8mm socket head screws           6 3mm washers           1 Hex allen wrench

39,-

KJØP
Art.nr: TRX 1651
Copied
This is a pair of half shafts (swing shafts or dog bones) For The Traxxas Bandit And Others TRX 1651 Features: White plastic half shafts with universal joint ends Metal universal joints Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a cross pattern)

79,-

KJØP
Art.nr: TRX 1654R
Copied
Wheel hubs, hex (steel) (2)/ axle pins (2)

69,-

KJØP
Art.nr: TRX 1654X
Copied
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
Art.nr: TRX 1664
Copied
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP
Art.nr: TRX 1664T
Copied
There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS:    Diameter: 3mm (0.118")           Length: 47 mm (1.85")           Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

KJØP
Art.nr: TRX 1685
Copied
  PTFE-coated washers (5x11x.5mm) (use with self-lubricating bushings)

29,-

KJØP
Art.nr: TRX 1726
Copied
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
Art.nr: TRX 1728
Copied
Battery foam pads

35,-

KJØP
Art.nr: TRX 1739
Copied
This is a replacement parts set for the Traxxas This Package Includes:    (2) 3X45mm Screw pins    (2) 3X35mm Screw pins    (2) 3X30mm Screw pins    (2) 3X27mm Screw pins    (2) 3X20mm Screw pins    Screw Pins are "hinges" for the suspension arms. These are almost totally     unthreaded screws except for 3 or 4 threads directly under the head of the     screw.

59,-

KJØP
Art.nr: TRX 1747A
Copied
Lock Nut Flanged M4 Alu Red (4)

99,-

109,-

KJØP
-9%
Art.nr: TRX 1747G
Copied
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

KJØP
-9%
Art.nr: TRX 1747P
Copied
Pink-anodized aluminum M4 flanged, serrated lock nuts (4) Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

99,-

109,-

KJØP
-9%
Art.nr: TRX 1747R
Copied
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
Art.nr: TRX 1747T
Copied
Traxxas 1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action. Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Rustler® 4X4 Brushless Stampede® 4X4 Brushless TRX-4® Sport High Trail Edition™ TRX-6® Ultimate RC Hauler 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Slash® 4X4 1/16 Summit™ Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica DCB M41 Widebody Ford® F-150 Raptor Ford® F-150® Raptor R™ 4X4 Ford® F-150® Raptor Jato® Nitro Rustler® Nitro Slash Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Slash® 4X4 Brushless Slash® Brushless Slash® VXL Slash® Stampede® 4X4 VXL Stampede® VXL Stampede® TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

99,-

109,-

KJØP
-9%
Art.nr: TRX 1770
Copied
This is a pair of replacement tires for the Traxxas line of cars. FEATURES A blend of natural and synthetic rubber in a step pin configuration. INCLUDES 2 tires per package. SPECIFICATIONS: Inside diameter: 2.15"  Outside diameter: 3.25"  Width: 1.5"

139,-

KJØP
Viser 351 til 375 (av 5154 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png