Hopp til innhold

Slash 2WD 2,4 ghz

 
Art.nr: TRX 3632
Copied
These are Castor Blocks for the Traxxas                              Rustler and Stampede. FEATURES: Black Plastic Construction INCLUDES: Two Blocks REQUIRES: Traxxas Rustler or Stampede COMMENTS: None

49,-

På lager 20
KJØP
Art.nr: TRX 3637
Copied
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

På lager 5
KJØP
Art.nr: TRX 3638X
Copied
This is the stock replacement REAR shock tower for the Traxxas Stampede/Rustler and Bandit FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Width at top: 4 5/16"    Width at bottom: 2 1/4"    Thickness: 1/4"    Height: 2 13/16" INCLUDES:    (1) Rear shock tower for the Traxxas Stampede

59,-

På lager 2
KJØP
Art.nr: TRX 8361
Copied
Shock caps (black) (4) (assembled with hollow balls)

59,-

På lager 1
KJØP
Art.nr: TRX 9136-GRAY
Copied
Traxxas 9136-GRAY - Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories.

99,-

På lager 1
KJØP
Art.nr: TRX 9150-GRAY
Copied
Traxxas 9150-GRAY - Carriers, stub axle, rear, extreme heavy duty,gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories.

79,-

89,-

På lager 3
KJØP
-11%
Art.nr: TRX 3654
Copied
        This is a Hex Wheel Hub Set for the Traxxas Rustler and                 Stampede. These parts have more offset than                   the stock hex wheel hub set. FEATURES: Gray plastic construction INCLUDES: Two wheel hubs           Two 2.5mmX10mm axle pins SPECS:    Hex size:          12mm           Width:             .32"         (8mm)

39,-

49,-

På lager 10
KJØP
-20%
Art.nr: TRX 3691
Copied
These are the left and right gearbox halves for the Traxxas Rusler and Stampede truck kits. Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts           Assembly Comments: These do not include the hardware for assembly. Refer to manual for           appropriate screws.

99,-

Ikke på lager
Ikke på lager
Art.nr: TRX 3691A
Copied
This is a Left and Right Gearbox half with Idler Shaft for the                      Traxxas Stampede and Traxxas Rustler. FEATURES:  Gray plastic construction            Steel idler shaft INCLUDES:  One gearbox            One idler shaft COMMENTS:  This part fit the standard and XL version of both the Stampede                and Rustler.

95,-

På lager 1
KJØP
Art.nr: TRX 3696
Copied
This is the optional Steel Idler Gear for many Traxxas Vehicles. FEATURES: Steel construction INCLUDES: One steel 30T idler gear REQUIRES: Installation on vehicle  

69,-

På lager 1
KJØP
Art.nr: TRX 3736
Copied
These are the Left and Right Steering Blocks           for the Traxxas Bandit, Stampede and Rustler VXL series. FEATURES: Plastic construction           Black in color INCLUDES: One left and right steering blocks REQUIRES: 5x11x4mm bearings

39,-

På lager 19
KJØP
Art.nr: TRX 3742
Copied
             These are Replacement Steering Hardware from Traxxas. FEATURES: Metal construction.           Chrome draglink shoulder screws with a phillips drive.           Black steering bellcrank shoulder screws with a hexagon socket drive.           Coarse thread. INCLUDES: (2) Bellcrank Screws           (2) Draglink Screws SPECS:    Bellcrank Size: 3x30mm           Draglink Size:  3x5mm

29,-

På lager 5
KJØP
Art.nr: TRX 3743
Copied
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

På lager 1
KJØP
Art.nr: TRX 3744X
Copied
This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features: White plastic construction           Spring loaded           Two adaptors-Futaba and Airtronics

49,-

På lager 10
KJØP
Art.nr: TRX 1747
Copied
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

På lager 8
KJØP
Art.nr: TRX 1926
Copied
This is a set of TRAXXAS receiver tube caps and a spool that could be used for                          any receiver antenna tubes. FEATURES: Caps are yellow plastic.           Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps           One spool                     

25,-

På lager 4
KJØP
Art.nr: TRX 2530-BLK
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

89,-

På lager 1
KJØP
-11%
Art.nr: TRX 2530-GRAY
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

89,-

På lager 4
KJØP
-11%
Art.nr: TRX 3785
Copied
This is the Traxxas Titan 550 12 Turn Electric Motor. FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series           Preinstalled leads, capacitors and connectors INCLUDES: Traxxas Titan 550 Motor, two capacitors and two leads with connectors REQUIRES: Installing in vehicle SPECS:    Can Diameter: 1.25" (38mm)           Shaft Diameter:  0.12" (3mm)           Length Including Shaft: 3.2" (81mm)           Length Not Including Shaft: 2.3" (57.5mm)           Specs such as RPM are not provided

329,-

369,-

På lager 5
KJØP
-11%
Art.nr: TRX 2530A
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
Ikke på lager
Art.nr: TRX 3790
Copied
Gear adapter, fixed Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler, and Stampede family models. Includes 5 adapters that cover 7 popular gearing combinations.

59,-

På lager 3
KJØP
Art.nr: TRX 2532
Copied
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

På lager 3
KJØP
-17%
Art.nr: TRX 3792
Copied
This is a Dust Cover and Rubber Plug                       for the Traxxas Rustler/Stampede FEATURES:  Made from black molded nylon            For the Traxxas Rustler/Stampede INCLUDES:  Dust cover for the Traxxa Rustler            3 x 6 mm round head coarse thread screws (to mount dust cover)            Rubber Plug Specs:     3" (77mm)            Compatible with Traxxas Telemetry

39,-

På lager 1
KJØP
Art.nr: TRX 2593
Copied
Screws, 3x14mm button-head machine (hex drive) (6)

39,-

På lager 4
KJØP
Art.nr: TRX 3793
Copied
This is a Slipper Clutch Shaft for the Traxxas Rustler XL                             and Stampede XL. FEATURES: Steel construction _         Roll pin pre-installed INCLUDES: One slipper clutch set SPECS:    Length:         1.98"          (50mm)           Diameter:        .21"          ( 5mm) COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

39,-

På lager 2
KJØP
Art.nr: TRX 2640
Copied
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

På lager 3
KJØP
-26%
Art.nr: TRX 2742
Copied
These are 5.8mm ball ends and balls.

49,-

59,-

På lager 2
KJØP
-17%
Art.nr: TRX 3639
Copied
This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

På lager 1
KJØP
Art.nr: TRX 3640
Copied
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

På lager 4
KJØP
-14%
Art.nr: TRX 4628R
Copied
These are the Differential Output Yokes                 for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes           Two 3x5mm countersunk screws           Two screw pins REQUIRES: Installation SPECS:    Length: .70" (18mm)           Diameter: .51" (13mm)

59,-

På lager 2
KJØP
Art.nr: TRX 3752
Copied
This is a pair of Stub Axle Carriers                for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

På lager 19
KJØP
Art.nr: TRX 4690
Copied
This is a Traxxas 48P, 90T Spur Gear for models                        with Torque Control Slipper Clutch. FEATURES: 48 pitch           90 tooth           Designed for models with a slipper clutch           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   90

49,-

På lager 8
KJØP
Art.nr: TRX 3931
Copied
These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

På lager 5
KJØP
Art.nr: TRX 5169
Copied
Screws M2.6x8mm Countersunk (6) Screws, 2.6x8mm countersunk machine (6)

29,-

På lager 2
KJØP
Art.nr: TRX 5529
Copied
This is the Shim Set for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Silver in color           For Adjusting Roll Center INCLUDES: Four Silver Metal Hollow Balls           Four 3mm Silver Washers REQUIRES: Assembly onto Vehicle

45,-

På lager 2
KJØP
Art.nr: TRX 5552A
Copied
Denne er også til dem som skal ha TRX 5552 og 5552X This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction INCLUDES: One Steel Disc           Three Friction Pads           Two Springs           One 4mm Lock Nut           One 5mm Lock Nut           Instructions REQUIRES: Disassembly of slipper clutch

119,-

På lager 2
KJØP
Art.nr: TRX 5556
Copied
These are the Slipper Press Plate and Hub               for the Traxxas. FEATURES: Pot Metal Construction           Silver in Color INCLUDES: One Slipper Press Plate           One Slipper Press Plate Hub REQUIRES: Assembly onto Vehicle

99,-

På lager 3
KJØP
Art.nr: TRX 6519
Copied
This is the TQ 2.4GHz 3-Channel Micro Receiver                 for use with the Traxxas TQ 2.4GHz Transmitter. INCLUDES: TQ 2.4GHz 3-Channel Micro Receiver SPECS:    Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)           Weight: 0.35oz (10g)

369,-

429,-

På lager 4
KJØP
-14%
Art.nr: TRX 2075
Copied
Traxxas 2075 - Waterproof Digital Servo The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°. SPECS:    Ball Bearing Digital High-torque Power: 125 oz-in (9kg/cm) Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

489,-

549,-

På lager 3
KJØP
-11%
Art.nr: TRX 3018R
Copied
XL-5™ Waterproof FWD/REV ESC with Low Voltage Detection (LVD) Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, Thermal Shutdown Protection, 4-7 cell compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patented Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. XL-5 is equipped with two-stage low-voltage detection (LVD) to allow LiPo battery use. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty. Traxxas High-Current Connector* The XL-5 ESC is equipped with the patented Traxxas high-current connectors for restriction-free current flow. Click here for more info about the patented Traxxas High-Current Connertor.     Patented Training Mode™ An exclusive feature that places the XL-5 ahead of the pack is the patented Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model.  When they're ready, simply change profiles to unleash full-throttle action.  Only Traxxas has it! XL-5 LVD Waterproof ESC Features Built-in two-stage low voltage detection (LVD) for Lithium Polymer (LiPo) battery use Innovative watersealed design 15-turn motor limit for 540 size motors 12-turn motor limit for 550 size motors Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode* – 50% Fwd / Brake / 50% Rev EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design Smooth, high-frequency operation Easy installation in Traxxas models Backed by the Traxxas Lifetime Electronics warranty   XL-5 LVD WATERPROOF ESC SPECIFICATIONS Input voltage: ­ 4-7 Cells (4.8 to 8.4 Volts DC) Case Size: ­ 1.23"W x 2.18"D x 0.61" H Weight: ­ 2.44 Ounce Motor Limit: ­ 15-turns** (540 Size) 12-turns** (550 Size) On Resistance Forward: ­ 0.007 Ohms On Resistance Reverse: ­ 0.014 Ohms BEC Voltage: ­ 6.0 VDC BEC Current: ­ 1A Power Wire: ­ 14 Gauge / 5" Input Harness Wire: ­ 26 Gauge / 9" PWM Frequency: ­ 1600 Hz Low Voltage Detection (LVD): ­ 2-Stage indicators, switchable (on or off) Thermal Protection: ­ Thermal shutdown Profile selection: ­ Sport Mode:     100% FWD, 100% brakes, 100% REV Race Mode:     100% FWD, 100% brakes, no REV Training Mode:*     50% FWD, 100% brakes, 50% REV Single-button setup: ­ Yes, Traxxas EZ-Set®

939,-

1.039,-

På lager 1
KJØP
-10%
Viser 101 til 140 (av 140 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png