Hopp til innhold

Slash 2WD 2,4 ghz

 
Art.nr: TRX 1651
Copied
This is a pair of half shafts (swing shafts or dog bones) For The Traxxas Bandit And Others TRX 1651 Features: White plastic half shafts with universal joint ends Metal universal joints Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a cross pattern)

79,-

På lager 3
KJØP
Art.nr: TRX 1654X
Copied
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

På lager 1
KJØP
Art.nr: TRX 1664
Copied
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

På lager 4
KJØP
Art.nr: TRX 1726
Copied
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

På lager 19
KJØP
Art.nr: TRX 1739
Copied
This is a replacement parts set for the Traxxas This Package Includes:    (2) 3X45mm Screw pins    (2) 3X35mm Screw pins    (2) 3X30mm Screw pins    (2) 3X27mm Screw pins    (2) 3X20mm Screw pins    Screw Pins are "hinges" for the suspension arms. These are almost totally     unthreaded screws except for 3 or 4 threads directly under the head of the     screw.

59,-

På lager 3
KJØP
Art.nr: TRX 1914R
Copied
Denne erstatter TRX 1914X   This is the Front and Rear Body Mounts for the Traxxas Slash 2wd. And Traxxas Body Mount Front/Rear Monster Jam FEATURES: Nylon construction           Black in color INCLUDES: One front body mount           One rear body mount           Two 38mm body posts           Two 26mm body posts           Installation hardware REQUIRES: Installation on the Traxxas Slash

75,-

På lager 4
KJØP
Art.nr: TRX 1942
Copied
This set of rod ends, balls, and screws is used on all but four of Traxxas' kits.  It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes:  4 short rod ends (17mm)            16 long rod ends (19mm)            2  ball screws            18 hollow ball connectors

85,-

95,-

På lager 3
KJØP
-11%
Art.nr: TRX 2072A
Copied
Gear set (for 2070, 2075 servos)

49,-

På lager 5
KJØP
Art.nr: TRX 2254
Copied
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)

239,-

På lager 1
KJØP
Art.nr: TRX 2553
Copied
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

På lager 3
KJØP
Art.nr: TRX 2554
Copied
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

På lager 4
KJØP
Art.nr: TRX 2555
Copied
These are the Rear Suspension Arms for the    Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm           One right suspension arm REQUIRES: TRX 1739 screw pins for installing SPECS:    Length: 3-5/8"                         

119,-

På lager 3
KJØP
Art.nr: TRX 2555X
Copied
Suspension arms, rear (black) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)                         

149,-

159,-

På lager 2
KJØP
-6%
Art.nr: TRX 2557
Copied
These are the 3x30mm Cap Head Screws for use on the          Traxxas Slash 2WD Short Course Racing Truck RTR. FEATURES: Steel construction           Black in color INCLUDES: Six 3x30mm Cap Head Screws REQUIRES: Installation on the vehicle SPECS:    Length: 3mm           Diameter: 30mm

39,-

49,-

På lager 2
KJØP
-20%
Art.nr: TRX 2656
Copied
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

På lager 2
KJØP
Art.nr: TRX 2742X
Copied
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

På lager 1
KJØP
Art.nr: TRX 3236
Copied
Replacement CAP HEAD SCREWS are designed to be used with Traxxas products requiring this type/size screw. They will also work with other manufacturers products requiring this type/size screw. PACKAGE INCLUDES:    4-Cap-Head Machine Screws (steel) SPECS:    Size: 2.5x12mm COMMENTS:    HEADERCARD STATES (6) PER PACKAGE ***** PACKAGE CONTAINS ONLY (4) SCREWS

29,-

På lager 5
KJØP
Art.nr: TRX 3677
Copied
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

På lager 1
KJØP
Art.nr: TRX 3690
Copied
Traxxas 3690 LED Lights Front (for LED-special Bumper) LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®)

239,-

259,-

På lager 3
KJØP
-8%
Art.nr: TRX 3727
Copied
  This is the Traxxas #3727 Rustler Battery Hold-Down Plate, Metal Post and Body Clip replacement parts for the Rustler truck. INCLUDES:  1  Black plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).            2  Metal posts  (Aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).            2  Steel body clips.   COMMENTS: Body clips are bent for easier installation.    

39,-

På lager 5
KJØP
Art.nr: TRX 3745
Copied
           These are the Traxxas 59mm Turnbuckle Toe Links               for the Traxxas Rustler, Stampede and Bandit VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two 59mm (78mm center to center) turnbuckles REQUIRES: Installation on the vehicle

105,-

På lager 1
KJØP
Art.nr: TRX 3762A
Copied
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

På lager 2
KJØP
Art.nr: TRX 3765A
Copied
These are the Long Shock Bodies for the Traxxas Ultra Shocks. FEATURES Molded Composite Gray in Color INCLUDES Two ultra shock bodies (long) REQUIREMENTS Installation SPECIFICATIONS Length: 1.45" (37mm) Diameter: .51" (13mm)

39,-

På lager 2
KJØP
Art.nr: TRX 3766A
Copied
These are the Shock Bodies for the Traxxas Ultra Shocks  used on the Traxxas T-Maxx 3.3.   FEATURES Molded Composite  Gray in Color   INCLUDES (2) Bodies   REQUIREMENTS Installation  SPECIFICATIONS  Length: 1.777" (45.1mm)  Diameter: 0.521" (13.2mm)

39,-

På lager 2
KJØP
Art.nr: TRX 3767
Copied
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

På lager 4
KJØP
Art.nr: TRX 3768
Copied
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

På lager 10
KJØP
Art.nr: TRX 3769
Copied
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

På lager 5
KJØP
Art.nr: TRX 4607
Copied
Ball bearings (5x11x4mm) (8)

289,-

319,-

På lager 2
KJØP
-9%
Art.nr: TRX 4760
Copied
Better than hard-anodized shocks, Traxxas Hard-Coat shocks greatly reduce  piston/housing friction, and this helps to prevent the heat build-up that can  cause inconsistent performance. The coating actually permeates the T-6  aluminum, making it many times more resistant to wear and corrosion.  Springs are not included

309,-

På lager 1
KJØP
Art.nr: TRX 5462
Copied
 This is the GTR Shock Rebuild Kit by Traxxas. FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons           Two blue rubber diaphragms           Four black plastic shock ends           Two piston lock nuts           Four metal X-rings COMMENTS: This set will rebuild two shocks

59,-

På lager 5
KJØP
Art.nr: TRX 5822
Copied
This is the Gray Nylon Chassis for the Traxxas Slash 2WD FEATURES: Gray composite nylon construction INCLUDES: One chassis for the Traxxas Slash REQUIRES: Installing all components onto the chassis SPECS:    Length: 338mm (13.3")           Width: 189mm (7.44")           Height: 23mm (0.91")           Thickness: 0.08" (2mm)

209,-

På lager 1
KJØP
Art.nr: TRX 5823
Copied
These are the replacement Nerf Bars for the Traxxas Slash. FEATURES: Black plastic construction INCLUDES: Two Nerf Bars for the Traxxas Slash REQUIRES: Installation onto Vehicle

49,-

Ikke på lager
Ikke på lager
Art.nr: TRX 5831G
Copied
Lower chassis, low CG (grey) Change up the color on your low-CG-equipped 2WD Slash with this gray lower chassis. Does not fit standard chassis.

79,-

89,-

På lager 1
KJØP
-11%
Art.nr: TRX 5835
Copied
This is the Front Bumper and Mount for the        Traxxas Slash 1/10 2WD Short Course Racing Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Front Bumper and bumper mount REQUIRES: Installation on the Traxxas Slash

129,-

På lager 4
KJØP
Art.nr: TRX 5836
Copied
his is the Rear Bumper and Mount for the        Traxxas Slash 1/10 2WD Short Course Racing Truck FEATURES: Nylon construction           Black in color INCLUDES: One Rear Bumper and bumper mount REQUIRES: Installation on the Traxxas Slash  

129,-

På lager 1
KJØP
Art.nr: TRX 5837
Copied
This is the Front and Rear Skidplate for the Traxxas Slash 2WD    This skidplate bolts to the Chassis and the Bulkheads TRX 5530     and provides protection to the front differential. FEATURES: Skidplate is constructed of high impact molded black plastic           Front of skidplate kicks up at about 40 degrees to shield the             differential from crash damage or hard landings from jumps INCLUDES: One front skidplate           One rear skidplate REQUIRES: Installing on chassis

99,-

På lager 1
KJØP
Art.nr: TRX 5857
Copied
These are the Front Shock Springs for the Traxxas Slash FEATURES: Metal construction, prgressive rate           White in color INCLUDES: Two Front Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS:    Length, uncompressed: 58mm (2.28")           Wire Diameter: 1.4mm (0.05")           Inner Diameter: 15.5mm (0.61")  

55,-

På lager 1
KJØP
Art.nr: TRX 5858
Copied
These are the Rear Shock Springs for the Traxxas Slash FEATURES: Metal construction           White in color INCLUDES: Two Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS:    Length, uncompressed: 69.5mm (2.74")           Wire Diameter: 1.4mm (0.05")           Inner Diameter: 15.5mm (0.61")  

59,-

På lager 2
KJØP
Art.nr: TRX 5859
Copied
                 These are the Rear Springs for use on the          Traxxas Slash 2WD Short Course Racing Truck RTR FEATURES: Steel construction, progressive rate damping           For Slash Big Bore shocks INCLUDES: Two Rear White Springs REQUIRES: Installation on the vehicle SPECS:    Length: 71mm (2.8")           Outer Diameter: 16.75mm (0.66")           Inner Diameter: 14.3mm (0.56")           Wire Diameter: 1.3mm (0.05")

99,-

På lager 3
KJØP
Art.nr: TRX 5860
Copied
                These are the Front Springs for use on the          Traxxas Slash 2WD Short Course Racing Truck RTR FEATURES: Steel construction, progressive rate damping           For Slash Big Bore shocks INCLUDES: Two Front White Springs REQUIRES: Installation on the vehicle SPECS:    Length: 59mm (2.3")           Outer Diameter: 16.75mm (0.66")           Inner Diameter: 14.3mm (0.56")           Wire Diameter: 1.3mm (0.05")

99,-

På lager 1
KJØP
Art.nr: TRX 5894
Copied
Traxxas 5894 LED Lights Front and Rear Kit Complete Slash 2WD LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®) Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Slash 2WD, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.

549,-

649,-

På lager 1
KJØP
-15%
Art.nr: TRX 6750
Copied
This is the Constant Velocity Half Shaft for the Traxxas XO-1 FEATURES: Polished steel construction           Externally splined INCLUDES: One Constant Velocity Half Shaft

99,-

På lager 3
KJØP
Art.nr: TRX 6966
Copied
Traxxas 6966 - Clipless Latch Mounts Latch mounts/ retainers (front & rear, left & right) Complete set of front and rear latch mounts and retainers for 1/10 scale Slash clipless bodies. Extra-wide retainers keep a firm hold on the body and reduce pull-though damage associated with body clips. Requires 6967 body latch mounts (sold separately). Replacement part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash VXL Slash Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

89,-

På lager 2
KJØP
Art.nr: TRX 6967
Copied
Traxxas 6967 Latch, body mounts (front & rear) Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts for 2WD Slashes and 6976 and 10125 body mounts and adapters for 4X4 Slashes (both sold separately). Replacement part for these models: Slash® 4X4 Ultimate (Clipless) Slash® 4X4 VXL (Clipless) Slash® VXL (Clipless) Slash® (Clipless) Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

119,-

På lager 2
KJØP
Art.nr: BULK TRX 3018R
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** XL-5™ Waterproof FWD/REV ESC with Low Voltage Detection (LVD) Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, Thermal Shutdown Protection, 4-7 cell compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patented Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. XL-5 is equipped with two-stage low-voltage detection (LVD) to allow LiPo battery use. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty. Traxxas High-Current Connector* The XL-5 ESC is equipped with the patented Traxxas high-current connectors for restriction-free current flow. Click here for more info about the patented Traxxas High-Current Connertor.     Patented Training Mode™ An exclusive feature that places the XL-5 ahead of the pack is the patented Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model.  When they're ready, simply change profiles to unleash full-throttle action.  Only Traxxas has it! XL-5 LVD Waterproof ESC Features Built-in two-stage low voltage detection (LVD) for Lithium Polymer (LiPo) battery use Innovative watersealed design 15-turn motor limit for 540 size motors 12-turn motor limit for 550 size motors Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode* – 50% Fwd / Brake / 50% Rev EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design Smooth, high-frequency operation Easy installation in Traxxas models Backed by the Traxxas Lifetime Electronics warranty   XL-5 LVD WATERPROOF ESC SPECIFICATIONS Input voltage: ­ 4-7 Cells (4.8 to 8.4 Volts DC) Case Size: ­ 1.23"W x 2.18"D x 0.61" H Weight: ­ 2.44 Ounce Motor Limit: ­ 15-turns** (540 Size) 12-turns** (550 Size) On Resistance Forward: ­ 0.007 Ohms On Resistance Reverse: ­ 0.014 Ohms BEC Voltage: ­ 6.0 VDC BEC Current: ­ 1A Power Wire: ­ 14 Gauge / 5" Input Harness Wire: ­ 26 Gauge / 9" PWM Frequency: ­ 1600 Hz Low Voltage Detection (LVD): ­ 2-Stage indicators, switchable (on or off) Thermal Protection: ­ Thermal shutdown Profile selection: ­ Sport Mode:     100% FWD, 100% brakes, 100% REV Race Mode:     100% FWD, 100% brakes, no REV Training Mode:*     50% FWD, 100% brakes, 50% REV Single-button setup: ­ Yes, Traxxas EZ-Set®

799,-

999,-

Ikke på lager
Ikke på lager
-20%
Art.nr: TRX 1633
Copied
This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,           4 of the shock C-clips and 3 body clips.

29,-

39,-

På lager 3
KJØP
-26%
Art.nr: TRX 1815
Copied
This is the Traxxas replacement Body Washers. FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm) INCLUDES:  Eight large body mount washers

29,-

På lager 1
KJØP
Art.nr: TRX 1765
Copied
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

På lager 4
KJØP
Art.nr: TRX 1935
Copied
These are replacement 36mm turnbuckles for Traxxas trucks. Includes: 2- 36mm threaded turnbuckles w/nut for easy adjustment.           2- 2x6,2.5mm thick  aluminum spacers Comment: The spacers are for spacing the ball end away from the transmission          bulkhead.

25,-

På lager 3
KJØP
Art.nr: TRX 1985
Copied
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

På lager 7
KJØP
Viser 1 til 50 (av 140 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png