Hopp til innhold

Traxxas 3790 Gear Adaptor Fixed 2WD

Art.nr: TRX 3790

59,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Gear adapter, fixed

Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler, and Stampede family models. Includes 5 adapters that cover 7 popular gearing combinations.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas Plug - Batteryside

29,-

KJØP
Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

KJØP
Cooling Fan Kit (Velineon 3500/ 540XL) (Need Heat Sink #3458

299,-

329,-

KJØP
-9%
 This is the Battery Hold-downs and Tall Retainers                   for the Traxxas 1/10 Rally VXL rally car FEATURES: Made of black plastic. INCLUDES: One battery hold-down           One tall front hold-down retainer           One tall rear hold-down retainer SPECS:    hold-down, length:         7-5/8" (194mm)                      width:          1-1/4" (32mm)                      height:         3/8"   (10mm)           front retainer, length:    46mm   (1-13/16")                           width:     50mm   (2")                           thickness: 8.5mm  (5/16")           rear retainer, length:     48mm   (1-7/8")                          width:      42mm   (1-5/8")                          thickness:  17mm   (11/16") COMMENTS: The tall hold-down retainers allow for the use of taller,              multi-cell batteries.

89,-

99,-

KJØP
-10%
Denne er også til dem som skal ha TRX 5552 og 5552X This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction INCLUDES: One Steel Disc           Three Friction Pads           Two Springs           One 4mm Lock Nut           One 5mm Lock Nut           Instructions REQUIRES: Disassembly of slipper clutch

119,-

Ikke på lager
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Traxxas 80WT/1000cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 80WT (1000cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver           on most popular servos including: Futaba, Hobbico, Tower, Airtronics,           and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages.

55,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
Tamiya 50686 M-Chassis 60D Inner Sponge Set

49,-

59,-

KJØP
-17%
Traxxas 9793-BLUE Heat sink, Titan® 87T motor (6061-T6 aluminum, blue-anodized) Reduce your motor temperatures with anodized style using the 6061-T6 aluminum heat sink for the Titan® 180 motor. Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

129,-

139,-

KJØP
-7%
XT60 2S 5300mAh -100C - ERC LiPo   Sunpadow 2s 5300mAh 100C med ferdig påloddet XT60-kontakt. Kraftig hardcase LiPopakke med meget høy C-rating. Passer utmerket til både on- og off-road samt crawling. Batteriet leveres i egen oppbevaringseske.   Spesifikasjoner: Kapasitet: 5300mAh Spenning: 2S 7.4V C-Rating 100C Anbefalt ladestyrke:    1C Vekt: 293gram Størrelse: 139x47x26mm Kontakt: XT60

399,-

429,-

KJØP
-7%
Bronto JST male - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

29,-

KJØP
Connector Tamiya Female 100mm 16AWG

45,-

KJØP
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive

359,-

379,-

KJØP
-5%
Type of Battery: NiMH Capacity: 1600 mAh Number of cells: 5 Voltage: 6,0 V

269,-

KJØP
Glow Plug No.8

99,-

KJØP
This is Tamiya Color Spray Lacquer for Plastic Models.                           ( TS-74 Clear Red)                         For Adult Modelers Only. FEATURES: Specially developed for decorating plastic models           This is a synthetic lacquer that cures in a short period of time.           This paint is impervious to acrylic or enamel paints           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Highly flammable.

109,-

KJØP
High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A   Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)   Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC   ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port   Firmware Firmware Upgrade: Supported   Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g   Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.  

1.795,-

2.195,-

KJØP
-18%
Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)   11-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

55,-

KJØP
Gear, 14-T pinion (48-pitch)/ set screw

35,-

KJØP
Battery Charge Indicator Plugs The #2943 Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt, corrosion, or foreign material during storage and transport. Each package includes 12 indicators: 4 green (charged), 4 grey (discharged), and 4 blue (storage charged)  

59,-

KJØP
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

79,-

89,-

KJØP
-11%
Traxxas 6482X Pinion Gear 12T 1.0M for 5mm Shaft (Machined) Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

129,-

139,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png