Hopp til innhold

Lys

 
Art.nr: BULK 53909
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Tamiya packaging *** "Bulk" Tamiya 53909 LED Light Unit TLU-01  This is the Tamiya LED Light Unit (TLU-01). FEATURES: Black plastic housing           Connections for up to eight sets of lights           Can be run off an ESC or separate battery source           On/off switch on the face of the housing INCLUDES: One LED light unit           Two white and two red colored 5mm lights           Two pieces of servo tape           Two cable clips           Four tie wraps           Instruction sheet SPECS:    Length:           1.59"          (40mm)           Width:            1.70"          (43mm)           Height:            .85"          (21mm)

469,-

579,-

Bulkvarer kan kun kjøpes når de er på lager
Ikke på lager
-19%
Art.nr: 10060
Copied
Denne LED lys bar'en er perfekt utstyr til din lastebil, truck eller beredskaps kjøretøy. Dimensjonene er dimensjonert for å passe perfekt på ett kjøretøy i 1/10 - 1/14 skala. Det har totalt 16 LED som er kontrollert av to trykk brytere som styrer lys sekvensen. En bryter styrer 8 orange LED på frontpanelet, mens den andre bryteren styrer 8 orange LED på baksiden. Bryterne gir også valg av 9 ulike blitsmodi slik at ulike strobing mønster og effekter. Denne baren vil være den perfekte finish på utvalgte RC eller skala modeller. Krever 9V batteri.

319,-

** Ikke på lager
KJØP
Art.nr: 10080
Copied
Auto Flashing Roof Mount Light The use of voltage : 4.8–6 V Method of use : the power line is connected to the receiver third channel ( CH3 ). It has six modes 。 Use the remote control CH3 and Switch control lights flashing mode .   Høyde 22 mm – 27mm med brakett Bredde 98mm

279,-

299,-

På lager 1
KJØP
-7%
Art.nr: AX24256
Copied
NB! Trenger mellom 12-15 volt   This is the Five White LED Light String from Axial. FEATURES: Five LED light string           Works with the Axial NVS Night Visions System 24251 INCLUDES: One White Five LED Light String REQUIRES: Installation SPECS:    Length: 395mm (15.6")

239,-

På lager 2
KJØP
Art.nr: AX31098
Copied
For use with the Axial AX31097 3-Port LED Controller  Compatible with the Axial licensed Rigid Industries light bars  White LEDs for headlights, duallys and more   INCLUDES Eight LED Lights with Wire Leads and Connector

219,-

På lager 4
KJØP
Art.nr: 907381
Copied
Skiltplate lys, kretskort med to LED lys. Virker fra 7,2 til 14 volt. Kabellengde 500 mm. Passer sammen med skiltholder med Art.nr. 500907034 Inneholder: 1 skilt lys, manual. Ikke kompatibel med semi-trailer lys kit 500907071st

235,-

På lager 2
KJØP
Art.nr: 65-10009
Copied
DYNAMIC SAND FINS ANTENNA LAMP BLUE

139,-

På lager 3
KJØP
Art.nr: FUSELED-33
Copied
Fuse LED - Saftblander - Gul   Mini varseelampe som kan kontrolleres fra radioen i syv ulike lysmodus. Lampen har innebygget kretskort slik at den kan kobles direkte i mottaker. Ved å feste lampen fra innsiden av karosseriet med medfølgende bakplate/skrue får du et solid feste. Festeplaten er selvsagt laget slik at ledninge fra lampen da kommer ut på innsiden av karosseriet for et usynlig og realistisk resultat. I pakken medfølger også Y-kabel, slik at du kan koble den til, selv uten ledige kanaler. Eventuelt om du ønsker å koble flere LED på samme kanal. Lyset styres basert på utslag på tilkoblede kanal.   Innebygget kretskort   JA Spenning   5-6V Lysmodus   7

149,-

** Ikke på lager
KJØP
Art.nr: FUSELED-45
Copied
Fuse LED - Varsellamper - Gul Varsellys som kan kontrolleres fra radioen i syv ulike lysmodus. Lampen har innebygget kretskort slik at den kan kobles direkte i mottaker. Ved å feste varsellyset fra innsiden av karosseriet med medfølgende bakplate/skrue får du et solid feste. Bakplaten har også hemper og medfølgende strips for oppheng av ledninger. Festeplaten er selvsagt laget slik at ledninge fra lampen da kommer ut på innsiden av karosseriet for et usynlig og realistisk resultat. I pakken medfølger også Y-kabel, slik at du kan koble den til, selv uten ledige kanaler. Eventuelt om du ønsker å koble flere LED på samme kanal. Lyset styres basert på utslag på tilkoblede kanal.   Innebygget kretskort    JA Spenning    5-6V Lysmodus    7  

199,-

239,-

** Ikke på lager
KJØP
-17%
Art.nr: 78-GTP99
Copied
G.T. POWER L12 MODEL CAR LED Lyssett med 12 stk LED. Kraftige super bright LED i størrelse 3mm, 6mm og 10mm Key Features Input voltage 3.6V – 8.4V Max current 270mA All LEDs are connected to one servo lead plug. What’s in the Box 2x 10mm White LEDs with 370mm lead 2 s 10mm Red LEDs with 370mm lead 2x 6mm Red LEDs with 370mm lead 2x 6mm White LEDs with 370mm lead 4x 3mm Yellow LEDs with 370mm lead

199,-

229,-

På lager 1
KJØP
-13%
Art.nr: 10042
Copied
Går på 9v batteri. "Neonlys" til å montere under kjøretøyet.

119,-

** Ikke på lager
KJØP
Art.nr: 65-10041
Copied
Går på 9v batteri. “Neonlys” til å montere under kjøretøyet.

119,-

På lager 1
KJØP
Art.nr: 10030
Copied
Går på 9v batteri. “Neonlys” til å montere under kjøretøyet.

119,-

** Ikke på lager
KJØP
Art.nr: GTP0104
Copied
GT Power GTP0104 Electrical Switch   Key Features 5 LED battery indicator. Voltage input – LiPo 2s / NiMH 4-8 Cells. Intelligent CPU control. Output voltage = input voltage Max peak current – 14 Amps Continuous current – 8 Amps What’s in the Box 1x Electrical switch with Rx lead 200mm and battery lead 100mm  

329,-

På lager 3
KJØP
Art.nr: GTP100
Copied
GT Power GTP100 L8 Model Car LED   Lyssett med 8stk kraftige super bright LED. Key Features Input Voltage DC 3.6V – 8.4V Max Current 220mA What’s in the Box 2x 10mm White LEDs with 350mm lead 2x 10mm Red LEDs with 350mm lead 2x 6mm White LEDs with 350mm lead 2x 6mm Red LEDs with 350mm lead 1x Receiver lead 280mm long For Power

149,-

På lager 2
KJØP
Art.nr: GTP109
Copied
GT Power GTP109 Pofessional Bluetooth 4 Channel Truck Light System   Dette settet benyttes hvis man ikke ønsker kabel mellom hytte og henger, men trådløs overførsel.   GT Professional Bluetooth 4-Channel Light/Lamp System for RC Truck.   Features: Include low voltage alarm function Suit for RC trucks and cars The booth main-board could be used seperately, or pair with the subsidiary-board Working modes includes a simulated mode and 14 kinds of flashing modes, which could be changed by pressing SET button Specifications: Brand: G.T.POWER Input voltage: 5V Max current: 800mA Main board: 44 * 36mm Length of lighting cable: 504mm and 615mm Package List: 1 * Main Board 1 * Sub Board 1 * Main Cable 1 * Battery Cable (connect 2s battery) 1 * Buzzer Cable (the connector is AUX2, set up before use) 2 * Button Cable (used for switch modes or pair with bluetooth) 4 * 5mm white light 2 * 5mm red light 6 * 3mm orange light 2 * 3mm blue light 1 * Accessory Packet 2 * English manual

1.099,-

På lager 1
KJØP
Art.nr: GTP68
Copied
GT Power GTP68 High Power Headlight System   Meget kraftige super bright LEDs med reflektorer! Bruker 0.5A. Lar seg fjernstyres om man har ledig kanal på mottakeren. Stort bruksområde. Kan for eksempel benyttes i fly, bil og båt.   Features: Power is supplied via the JST-XH balance connector from a 2s lipo battery The JST-XH balance connector input voltage range is 6.5-8.4v DC Control voltage input from the receiver: 5.0V DC Max Specifications: LED Housing Diameter: 22mm LED Housing Depth: 21mm JST-XH (2s) wire length: 180mm Control to LED wire length: 200mm

269,-

** Ikke på lager
KJØP
Art.nr: GTP69
Copied
Off-road lys til 1/5 eller 1/8.     This lighting system use intelligent MUC control and have two sets of super bright lights groups. It’s easy to set up and operate.   Feature: For: 1/5 and 1/8 Off-Road and other types model RC Cars Powered by receiver, don’t need other power supply. Two groups are for output, one group is always lit and the other is controlled by the throttle channel of transmitter.   Include: Control board (1pc) Big headlight and dome light – 1 contain 4 light set (1 pc) Taillight – 1 contain 2 light set (1 pc) Manual (1 pc)

349,-

379,-

På lager 1
KJØP
-8%
Art.nr: GTP121
Copied
Lysbar for 1/10 biler Features: Suitable for all 1/10 crawlers 5 Spotlights Specifications: For: crawler Material: plastic Color: silver Light diameter: 2cm Cable length: 40cm Package Information: Package size: 22 * 11 * 3cm / 8.7 * 4.3 * 1.2in Package weight: 57g / 2oz Adhesive tape package Package List: 1 * G.T.POWER LED Crawler Roof Light Bar Set 1 * Manual

199,-

På lager 2
KJØP
Art.nr: GTP122
Copied
Lysbar for 1/10 biler, sølv/chrome   Features: Suitable for all 1/10 crawlers 5 Spotlights Specifications: For: crawler Material: plastic Color: silver Light diameter: 2cm Cable length: 40cm Package Information: Package size: 22 * 11 * 3cm / 8.7 * 4.3 * 1.2in Package weight: 57g / 2oz Adhesive tape package Package List: 1 * G.T.POWER LED Crawler Roof Light Bar Set 1 * Manual

209,-

På lager 1
KJØP
Art.nr: 97054-2B
Copied
Kyosho 97054-2B LED Light Unit (Diam=5/L=400/Clear/2 Bulbs)

149,-

179,-

** Ikke på lager
KJØP
-17%
Art.nr: 97054-4C
Copied
Kyosho 97054-4B LED Light Unit (Diam=5/L=400/Clear/4 Bulbs)

199,-

239,-

På lager 4
KJØP
-17%
Art.nr: 65-10007
Copied
4.Widely used for accident handing vehicle,simulation lights.     1.Electric vehicle / oil motor car installation:          2.Power supply using special attachment plug,the receiver power supply:voltage of 4.8-6V,connected to a power supply start lighting.                                   3.From 360 degrees direction equalization astigmatism,high irradiation,the lights of the latest technology.                                               

139,-

149,-

På lager 3
KJØP
-7%
Art.nr: 65-10018
Copied
MAGIC FLASHING LIGHT–EAGLE Magic Flashing Light(car rear window flashing) — Eagle shape RC car light is suitable for all kinds of RC cars .Connected with the receiver . You can paste it in the back of your car windows .It has 9 modes of flashing ,You can change the Flashing mode by the Mini Switch . Install the light on your car ,will made your car more attactive, Especially at night. Color:  Colorful

269,-

På lager 1
KJØP
Art.nr: 10028
Copied
4.8-6V Med mottakerplugg   10.5x2.5x2.5cm

239,-

** Ikke på lager
KJØP
Art.nr: 627600
Copied
This is the Pro-Line Straight 2" Super Bright LED Light Bar Kit. FEATURES Fits 1/8 and 1/10 scale rock racers, crawlers and monster trucks Ten LED lights prewired with a 12" (305mm) long cable that plugs into receiver May be powered by 2S or 3S Lipo Power Mounts and hardware for custom installations Black nylon plastic housing May be installed with the 6278-00 Overland Scale Roof Rack INCLUDES 2" (51mm) LED Light Bar Six Plastic Mounts Four M3 x 15 Button Head Cap Screws Four M3 Locknuts Four M3 Washers Four M2 x 6 Socket Head Cap Screws

549,-

599,-

På lager 5
KJØP
-8%
Art.nr: 627602
Copied
This is the Pro-Line Straight 6" Super Bright LED Light Bar Kit. FEATURES Fits 1/8 and 1/10 scale rock racers, crawlers and monster trucks Twenty LED lights prewired with a 12" (305mm) long cable that plugs into receiver May be powered by 2S or 3S Lipo Power Mounts and hardware for custom installations Black nylon plastic housing May be installed with the 6278-00 Overland Scale Roof Rack INCLUDES 6" (152mm) LED Light Bar Six Plastic Mounts Four M3 x 15 Button Head Cap Screws Four M3 LocknutsFour M3 Washers Four M2 x 6 Socket Head Cap Screws

799,-

849,-

På lager 2
KJØP
-6%
Art.nr: 6276-03
Copied
This is the Pro-Line 5" Super-Bright Curved LED Light Bar Kit.     FEATURES 26 LED light bulbs prewired with a 12" (305mm) long cable that plugs into an unused port of a receiver May be powered by 6-12V, including a 3S LiPo battery Curved black nylon housing Ideal for 1/8 scale monster trucks, short course trucks, rock racers and rock crawlers     INCLUDES 5" Super-Bright Curved LED Light Bar Six Plastic Mounts Four M3 x 15 BHCS Four M3 Locknuts Four M3 Washers Four M2 x 6 Socket Head Cap Screws

799,-

849,-

På lager 2
KJØP
-6%
Art.nr: 6276-05
Copied
This is a Double Row 6” Curved Light Bar for X-MAXX®. Pro-Line is proud to introduce a new Double Row 6" Curved LED Light Bar Kit with real, working LED Lights perfect for your X-MAXX®! If you are like us, you want to use your RC car at any time of the day or night. Well now you can with the Double Row 6" Curved Light Bar. It comes with 60 LED Light bulbs, which is 2 rows of stacked LED’s and is pre-wired with a 12" long cable that can plug directly into your receiver for power. The Lights are rated for 6V to 12V power, so you have the option to plug directly into a 3S Lipo power source for Super-Bright LED Light! The LED Lights are housed in a durable Curved Black Nylon housing branded with a P-L logo and includes extra-thick mounts and the hardware you need to do a custom install on your X-MAXX® or another vehicle. Night bashing is all the rage so don't get left in the Dark! Get Pro-Line's new 6" Curved Super-Bright LED Light Bar Kit for your truck today!

899,-

999,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-10%
Art.nr: 6317-00
Copied
This is a Universal LED Headlight & Tail Light Kit for Crawlers. Pro-Line is proud to introduce the new Universal Headlight and Tail Light Kit with real, working LED Lights perfect for your Crawler! If you are like us, you want to use your RC car at any time of the day or night and this Light Kit allows you to do that while adding even more Scale Realism. This light kit includes 4 LED Light bulbs – 2 White lights for the head lights and 2 Red lights for your tail lights – and the lights are pre-wired to plug directly into your receiver (5V-6V) for power. The LED Lights can be housed in 5 different sets of optional front or rear Black Nylon light buckets that have been designed to fit most Rock Crawling Bodies. The LED's are secured into the Light Buckets with the included screws and the Light Buckets can be installed inside the body with flexible adhesive or double-sided tape. Night crawling is all the rage, so you don't want to get left in the Dark! Get Pro-Line's new Universal LED Headlight and Tail Light Kit for your truck today!   Features Real, Working Headlight and Tail light LED Kit for your Rock Crawler White LED's for the Headlights and Red LED's for the Tail lights Can Plug Lights Directly into your Receiver Plug for Easy Install Includes Mounts and Hardware for Custom Install 5 Different Types of Front or Rear Light Buckets Included Light Buckets Made from Black Nylon Plastic for Durability Adds Scale Realism to your Rock Crawler   Included Pre-wired LED Lights (1 pc) Light Bucket Plastic Tree (1 pc) M2.5 x 3 BHCS (4 pcs)  

355,-

** Ikke på lager
KJØP
Art.nr: 65-10053
Copied
Roterende og blinkende nødlys. Meget kraftig orange lys. Kommer komplett med ledning og JR kontakt for tilkobling i mottaker. Beregnet på 4.8V – 6.0V

159,-

** Ikke på lager
KJØP
Art.nr: 65-10054
Copied
Roterende og blinkende nødlys. Meget kraftig rødt lys. Kommer komplett med ledning og JR kontakt for tilkobling i mottaker. Beregnet på 4.8V – 6.0V

159,-

På lager 5
KJØP
Art.nr: 65-10055
Copied
RC AUTO FLASHING ALARM LIGHT BLUE

139,-

På lager 2
KJØP
Art.nr: 10004
Copied
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

** Ikke på lager
KJØP
-8%
Art.nr: 10008
Copied
1.Electric vehicle / oil motor car installation:         2.Power supply using special attachment plug,the receiver power supply:voltage of 4.8-6V,connected to a power supply start lighting.                                  3.From 360 degrees direction equalization astigmatism,high irradiation,the lights of the latest technology.                                             4.Widely used for accident handing vehicle,simulation lights.    

139,-

** Ikke på lager
KJØP
Art.nr: 65-10010
Copied
RC lys-sett med 4 lys dioder. Består av 5mm LED. 2 stk røde og 2 stk hvite for forlys og baklys. Det er en microbryter for å skru av og på. For drift biler, onroad, Crawler etc etc Bare fantasien setter stopper. 

109,-

** Ikke på lager
KJØP
Art.nr: 65-10011
Copied
RC lys-sett med 10 lys dioder. Består av 6 stk 5mm LED. 2 stk røde og 4 stk hvite for forlys og baklys. Og 2 stk 3mm LED – gule Det er en microbryter for å skru av og på. For drift biler, onroad, Crawler etc etc Bare fantasien setter stopper. 

199,-

219,-

** Ikke på lager
KJØP
-9%
Art.nr: 65-10033
Copied
RC Light 10 LED Set For 9V Battery 4 stk hvite 2 stk røde 4 stk orange

149,-

169,-

På lager 1
KJØP
-12%
Art.nr: 10063
Copied
Eller ekstern batterikilde 4.8V – 6.0V Politi lys i rund utførelse, for feste på taket på bilen. Er best tilpasset 1:10 scale karosseri. Kan tilkobles rett i mottaker. Kontakt er tilpasset dette.

219,-

239,-

** Ikke på lager
KJØP
-8%
Art.nr: 65-10032
Copied
RC Light 8 LED Set For 9V Battery

179,-

** Ikke på lager
KJØP
Art.nr: 65-10031
Copied
RC Lights 65-10031 Head & Tail Lights With Metal Mounts   Pene lykter til infelling i karosseri. Laget i aluminium.

139,-

** Ikke på lager
KJØP
Art.nr: C0217
Copied
1/10 Rally 3000 Hella Lights Specifications:   ABS Plastic Injection Molding Stainless Steel Mounts Total Length: 0.41in / 10.5mm Total Width: 0.71in / 18.2mm Total Height: 0.74in / 19mm Weight: 0.10oz / 2.8g       What's Included: 2x 1/10 Rally 3000 Hella Lights 1x Mount Plates 4x M1 x 6mm Phillips Head Machine Screws (Silver) 2x M1.4 x 4mm Phillips Head Machine Screws (Black) 4x Regular M1 Nuts (Silver) 1x Rally 3000 Hella Decal Optional Parts: 1/10 Round IPF Lights w/LED (VVV-C0214) 1/10 Rally 3000 Hella Lights w/LED (VVV-C0222) 1/10 Square IPF Lights (VVV-C0224) 1/10 Square IPF Lights w/LED (VVV-C0229) Notes: Fits Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Standard) (VVV-C0206) Fits Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round Lights) (VVV-C0211) Fits Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella and IPF Round Lights) (VVV-C0209) Fits Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round and IPF Square Lights) (VVV-C0219) Fits Rough Stuff Limited Edition Red Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round and IPF Square Lights) (VVV-C0215)

369,-

399,-

** Ikke på lager
KJØP
-8%
Art.nr: C1239
Copied
LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Square) Specifications: Strong Durable Nylon ABS Plastic Injection Molding Voltage: 5.0 - 7.2V Total Weight: 0.59oz / 17g   What's Included: 1x LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Square) 4x M1.2x 4mm Cross Head Self Tapping Screws 2x M2x 6mm Cross Head Self Tapping Screws   Optional Light Bars: LED Light Bar for Traxxas TRX-4 2021 Bronco (Square) (VVV-C1240) LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Round) (VVV-C1241) LED Light Bar for Traxxas TRX-4 2021 Bronco (Round) (VVV-C1242)   Notes: Fits Traxxas TRX-4 2021 Ford Bronco One of the following parts is required: Roof Rails for Traxxas TRX-4 2021 Bronco (Style A) (VVV-C1235) Roof Rails for Traxxas TRX-4 2021 Bronco (Style B) (VVV-C1236) Roof Rails and Metal Roof Rack for Traxxas TRX-4 2021 Bronco (Style A) (VVV-C1237) Roof Rails and Metal Roof Rack for Traxxas TRX-4 2021 Bronco (Style B) (VVV-C1238)

599,-

699,-

** Ikke på lager
KJØP
-14%
Art.nr: C1240
Copied
LED Light Bar for Traxxas TRX-4 2021 Bronco (Square)       Specifications: Strong Durable Nylon ABS Plastic Injection Molding Voltage: 5.0 - 7.2V Total Weight: 0.70oz / 20g                 Shown installed on Traxxas TRX-4 2021 Ford Bronco with Metal Tube Front Bumper with LED for Traxxas TRX-4 2021 Bronco, Metal Side Sliders for Traxxas TRX-4 2021 Bronco (Style B) (VVV-C1233) and Rad 1.9" Aluminum Internal Beadlock Wheels (Black) (VVV-C1225) for example (Not Included)           What's Included: 1x LED Light Bar for Traxxas TRX-4 2021 Bronco (Square) 4x M2 x 10mm Steel Button Head Cap Screws 4x Nylock Nuts M2 (Black) 4x M1.2x 4mm Cross Head Self Tapping Screws   Optional Light Bars: LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Square) (VVV-C1239) LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Round) (VVV-C1241) LED Light Bar for Traxxas TRX-4 2021 Bronco (Round) (VVV-C1242)   Notes: Fits Traxxas TRX-4 2021 Ford Bronco

599,-

699,-

På lager 1
KJØP
-14%
Art.nr: C1241
Copied
LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Round) Specifications: Strong Durable Nylon ABS Plastic Injection Molding Voltage: 5.0 - 7.2V Total Weight: 0.59oz / 17g   What's Included: 1x LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Round) 9x M1.2x 4mm Cross Head Self Tapping Screws 2x M2x 6mm Cross Head Self Tapping Screws   Optional Light Bars: LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Square) (VVV-C1239) LED Light Bar for Traxxas TRX-4 2021 Bronco (Square) (VVV-C1240) LED Light Bar for Traxxas TRX-4 2021 Bronco (Round) (VVV-C1242)   Notes: Fits Traxxas TRX-4 2021 Ford Bronco One of the following parts is required: Roof Rails for Traxxas TRX-4 2021 Bronco (Style A) (VVV-C1235) Roof Rails for Traxxas TRX-4 2021 Bronco (Style B) (VVV-C1236) Roof Rails and Metal Roof Rack for Traxxas TRX-4 2021 Bronco (Style A) (VVV-C1237) Roof Rails and Metal Roof Rack for Traxxas TRX-4 2021 Bronco (Style B) (VVV-C1238)

759,-

829,-

På lager 1
KJØP
-8%
Art.nr: C1242
Copied
LED Light Bar for Traxxas TRX-4 2021 Bronco (Round) Specifications: Strong Durable Nylon ABS Plastic Injection Molding Voltage: 5.0 - 7.2V Total Weight: 0.70oz / 20g   What’s Included: 1x LED Light Bar for Traxxas TRX-4 2021 Bronco (Round) 4x M2 x 10mm Steel Button Head Cap Screws 4x Nylock Nuts M2 (Black) 9x M1.2x 4mm Cross Head Self Tapping Screws   Optional Light Bars: LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Square) (VVV-C1239) LED Light Bar for Traxxas TRX-4 2021 Bronco (Square) (VVV-C1240) LED Light Bar for Roof Rack and Traxxas TRX-4 2021 Bronco (Round) (VVV-C1241)   Notes: Fits Traxxas TRX-4 2021 Ford Bronco

779,-

849,-

På lager 1
KJØP
-8%
Art.nr: E0061
Copied
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6") This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any project look better and add much needed lighting.   Specifications: Cast Molded Housing Reversible "L" Brackets to fit many Applications Adjustable "L" Brackets for Rotating Light 64 Individual LED Bulbs Super Bright Lighting Vented on side to Dissipate Heat Works with up to 11.1v Lipo with use of a BEC to Regulate Voltage below 7.4 Volts Standard Receiver Plug Connects to Extra Channel on Receiver 2mm Mounting Holes Overall Length: 6.7in / 170.5mm Light Bar Width: 5.9in / 150mm Overall Height: 0.82in / 21mm Light Bar Height: 0.63in / 16.2mm Weight: 2.43oz / 69g   What's Included: 1x RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6") 1x KC HiLiTES Decal Sheet   Replacement Hardware: 20x M1.5 X 5mm SHCS (Silver) 6x M1.6 X 6mm Phillips Head Machine Screws (Silver) (Z-S1387) RC4WD Light Bar Knurled Nuts (Z-S1484)   Optional Parts: Y Harness with Tamiya Connectors for Light Bars (Z-S1601) RC4WD Mini ON/OFF Switch for Lighting Unit (Z-E0081) RC4WD Strobe Lighting Unit (Z-S1573) Notes: Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position. Mounting hardware can be found here. M2 SHCS / M2 BHSC While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver. This product has been tested and approved by the Recon G6. It is Recon G6 Certified. KC HiLiTES and the KC HiLiTES name are registered trademarks of KC HiLiTES Company. The KC and KC HiLiTES logo is property of KC HiLiTES Company and used under license to RC4WD.

599,-

649,-

På lager 2
KJØP
-8%
Art.nr: E0095
Copied
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72") This is the all new Licensed KC HiLiTES Light Bar and is sure to brighten up any project with much needed lighting! This has been Officially Licensed by the KC HiLiTES Company and is only available from RC4WD and our Dealers.    Specifications: Cast Molded Housing Black Anodized Finish Reversible "L" Brackets to fit many Applications Adjustable "L" Brackets for Rotating Light Super Bright Lighting Vented on Side to Dissipate Heat Works with up to 11.1v LiPo with use of a BEC to regulate voltage below 7.4 volts Standard Receiver Plug Connects to Extra Channel on Receiver 2mm Mounting Holes Overall Length: 5.43in / 137.9mm Light Bar Width: 4.88in / 124mm Overall Height: 0.83in / 21.2mm Light Bar Height: 0.63in / 16.2mm Weight: 1.80oz / 51g     What's Included: 1x RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72") 1x KC HiLiTES Decal Sheet Optional Parts: RC4WD Strobe Lighting Unit (Z-S1573) Y Harness with Tamiya Connectors for Lightbars (Z-S1601) RC4WD Mini ON/OFF Switch for Lighting Unit (Z-E0081) RC4WD Strobe Lighting Unit (Z-S1573) Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits  RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set (Z-RTR0029) Fits RC4WD Gelande II D110 Truck Kit With Hard Body (Z-K0047) Fits Tube Rear Bumper for Axial SCX10 II XJ (Red) (VVV-C0341) Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084) Fits RC4WD 1/10 Gelande II D110 Hard Plastic Body Kit (Z-B0064) KC HiLiTES and the KC HiLiTES name are registered trademarks of KC HiLiTES Company. The KC and KC HiLiTES logo is property of KC HiLiTES Company and used under license to RC4WD.

599,-

629,-

På lager 2
KJØP
-5%
Art.nr: RER11650
Copied
LED Light Kit with Control Box WP RER11650 med 16 LED-dioder hvor 12 er hvite og 4 røde. Diameter på diodene er 5mm. Inkludert i esken er kontrollmodul, 16 led-dioder, monteringstilbehør til modul, limpads og strips. Settet er vannbestandig, ikke beregnet for bruk under vann. Ledningslengder er dimensjonert for bruk på Gen8 Scout II.   Product details in english PRODUCT FEATURES The Gen8 light kit is made specifically for the Gen8 with Scout II Body. Fully waterproof with 16 total LEDs. (4 Red and 12 White 5mm LEDs). Features include: Wire length tailored specifically for the Gen8 Scout II Scale brake light function Scale reverse light function Single wire for main body disconnect Fully waterproof

425,-

495,-

** Ikke på lager
KJØP
-14%
Art.nr: 65-10025
Copied
ROOF MOUNT LIGHT SET 5 LED Led lys beregnet på takmontasje. Det følger med takbøile for montering. Også “1000 metere” og resten av feste matriellet er medi settet. 5 stk 5mm LED er med, samt kontakt. Ett utrolig fint lys sett

349,-

** Ikke på lager
KJØP
Viser 1 til 50 (av 124 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png