Hopp til innhold
-17%

Fuse LED - Varsellamper - Gul

Art.nr: FUSELED-45

199,-

239,-

- 17%
Fuse

Fuse

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Fuse LED - Varsellamper - Gul

Varsellys som kan kontrolleres fra radioen i syv ulike lysmodus. Lampen har innebygget kretskort slik at den kan kobles direkte i mottaker.

Ved å feste varsellyset fra innsiden av karosseriet med medfølgende bakplate/skrue får du et solid feste. Bakplaten har også hemper og medfølgende strips for oppheng av ledninger. Festeplaten er selvsagt laget slik at ledninge fra lampen da kommer ut på innsiden av karosseriet for et usynlig og realistisk resultat. I pakken medfølger også Y-kabel, slik at du kan koble den til, selv uten ledige kanaler. Eventuelt om du ønsker å koble flere LED på samme kanal. Lyset styres basert på utslag på tilkoblede kanal.

 

Innebygget kretskort    JA
Spenning    5-6V
Lysmodus    7

 

Produsent

Fuse

Relaterte produkter

 

Art.nr: FUSELED-33
Copied
Fuse LED - Saftblander - Gul   Mini varseelampe som kan kontrolleres fra radioen i syv ulike lysmodus. Lampen har innebygget kretskort slik at den kan kobles direkte i mottaker. Ved å feste lampen fra innsiden av karosseriet med medfølgende bakplate/skrue får du et solid feste. Festeplaten er selvsagt laget slik at ledninge fra lampen da kommer ut på innsiden av karosseriet for et usynlig og realistisk resultat. I pakken medfølger også Y-kabel, slik at du kan koble den til, selv uten ledige kanaler. Eventuelt om du ønsker å koble flere LED på samme kanal. Lyset styres basert på utslag på tilkoblede kanal.   Innebygget kretskort   JA Spenning   5-6V Lysmodus   7

149,-

KJØP
Art.nr: 10063
Copied
Eller ekstern batterikilde 4.8V – 6.0V Politi lys i rund utførelse, for feste på taket på bilen. Er best tilpasset 1:10 scale karosseri. Kan tilkobles rett i mottaker. Kontakt er tilpasset dette.

219,-

239,-

KJØP
-8%
Art.nr: 65-10009
Copied
DYNAMIC SAND FINS ANTENNA LAMP BLUE

139,-

KJØP
Art.nr: 65-10007
Copied
4.Widely used for accident handing vehicle,simulation lights.     1.Electric vehicle / oil motor car installation:          2.Power supply using special attachment plug,the receiver power supply:voltage of 4.8-6V,connected to a power supply start lighting.                                   3.From 360 degrees direction equalization astigmatism,high irradiation,the lights of the latest technology.                                               

139,-

149,-

KJØP
-7%

Kunder kjøpte også

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Traxxas 9790 - TRX-4M Trailer Light Kit The Trailer Light Kit adds working brake and reverse lights to the TRX-4M™ utility trailer. Give your trailer and extra dose of scale realism with this all-inclusive kit. The light kit is fully compatible with TRX-4M’s standard bumper lights and the Pro Scale® Light Set. Trailer lights are easy to install with the included mounting hardware and replica tool box. Everything is completely waterproof for worry-free driving in any environment. TRX-4M Trailer Light Kit Features: Working brake and reverse lights Fully waterproof Compatible with existing TRX-4M light kits Simple installation with all mounting hardware included

299,-

329,-

KJØP
-9%
Traxxas 6589 LED Distribution Block Distribution block, LED light set

95,-

KJØP
USB Delta Peak Charger 250Mah (NiMh 7.2V - Deans)

119,-

129,-

KJØP
-8%
  3-in-1 wire harness, LED light kit, TRX-4®

75,-

KJØP
LED light bar, roof lights (fits #8111 body, requires #8028 power supply) #8087 Kit Contents (parts #8120 or #8120X required, sold separately): LED roof light bar 2.5x8mm cap screws (2) Zip tie mount (1) Zip tie (1)

259,-

KJØP
LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply) #8086 Kit Contents (parts #8120 or #8120X required, sold separately): Expedition rack scene lights harness assembly 2.5x8mm cap screws (8) Zip tie mount (1) Zip tie (1)

199,-

219,-

KJØP
-9%
4-in-2 Wire Harness for LED Light Kit TRX-4

69,-

KJØP
LED headlight/tail light kit (fits #8111 body, requires #8028 power supply) #8084 Kit Contents (parts #8116 and #8117 required, sold separately): Headlights harness assembly Tail lights harness assembly

529,-

KJØP
  LED Light Bar with High/Low Brightness Switch Designed to the rigorous standards of both Traxxas and leading lighting manufacturer RIGID®, the LED light bar utilizes surface mount LED technology and a custom clear lens for unsurpassed realism. The integrated switch controls the brightness of both the light bar and the headlights. The light bar bolts directly to the Land Rover Defender ExoCage, but the universal mounting tabs also allow easy custom installation on a variety of surfaces. Needed (not included): #428028 - TRX-4 Power Supply Kit

359,-

KJØP
This is the 1/10 scale RC4WD Warn 8274 Winch.   FEATURES CNC machined billet and cast aluminum construction Working spring loaded Warn hook 3.28ft (1.0m) synthetic rope pre-installed Operates on 6-11.1V Officially licensed by Warn Can operate on 3 Cell LiPo   INCLUDES RC4WD 1/10 Warn 8274 Winch Four M2.5 x 4mm Socket Head Cap Screws Four M2.5 x 6mm Socket Head Cap Screws RC4WD Warn Winch Pull Tag Warn Decal Sheet Set   REQUIREMENTS Z-S1092  Wireless Remote/Receiver Winch Controller Set Z-S1089  Wired Winch Control Unit   SPECIFICATIONS Load Limits: Dead Lift 50lbs (22.6kgs) Load Limits: Rolling Drag 70lbs (31.7kgs) Winch Rope Load Limits: Dead Lift 25lbs (11.3kgs) Winch Rope Load Limits: Rolling Drag 37lbs (16.8kgs) Length: 1.40" (35.6mm) Width: 2.56" (65.0mm) Height: 1.77" (45.0mm) Weight: 3.28oz (93g)  

1.295,-

1.895,-

KJØP
-32%
This is the Warn 1/10 scale Wireless Remote/Receiver Winch Controller Set from RC4WD. FEATURES For use with the RC4WD Bulldog 9300XT, and the WARN 9.5CTI winches 2.4GHz technology Heavy duty drive circuit Over 10' (3.04m) range Simple hookup INCLUDES Wireless Remote with Battery Receiver 6" (152mm) Battery/Receiver Power Wire 6" (152mm) Receiver/Winch Control Wire SPECIFICATIONS Receiver; Battery Compatibility: 2 and 3 cell LiPo Operating Voltage: 6 - 11.1V (see Comments) Length: 1.6" (40.4mm) Width: 1.2" (30.2mm) Height: 0.37" (9.4mm) Weight: 0.5oz (14g) Wires; Length: 6" (150mm) Wires Weight: 0.14oz (4g) COMMENTS This Wireless Remote/Receiver is not waterproof. Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell lipo.

595,-

KONTAKT
Traxxas 9230-BROWN Body, Ford F-150 (1979), complete, brown (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, & clipless mounting) (requires #9288 inner fenders) (roll bar sold separately; choose #9262 chrome, 9262R black, or 9262X chrome with LED TRX-4® 1979 Ford® F-150® body kits come fully-painted with clipless body mounts and pre-assembled body accessories for easy mounting on your TRX-4.  Replacement part for these models: TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Chevrolet® K10 High Trail Edition™

1.699,-

1.799,-

KJØP
-6%
MST 532183F FXX 2.0 1/10 RWD 86RB KIT MST FXX 2.0 1/10 RWD Electric Shaft Driven Car Kit er ett drift-byggesett med bakhjulstrekk. Den gode FXX platformen gir veldig gode kjøreegenskaper, og med et sentrert tygdepunkt ligger den fint gjennom svingene. Bilen har blit designet for å oppnå større svingvinkel, som vil gi enda mer realistisk look i drifts. Følger med ulakkert 86RB-karosseri og hjul. Nødvendig tilbehør med elektronikk er listet opp under. Ved montering kan både motor og servo monteres forskjellig, motor kan festes med øvre eller nedre tyngdepunkt, og servo kan festes flatt eller stående.     Spesifikasjoner Lengde Bestemmes av karosseri Bredde 190mm Høyde Bestemmes av karosseri Akselavstand    257mm Caster Justerbar 12/14/16/18-grader Camber Justerbar 0 til -12 grader Dempertype Hydrauliske   Nødvendig tilbehør: Radio og mottaker Styreservo ESC/Regulator Motor Batteri og lader Pinion

3.895,-

3.995,-

KJØP
-3%
   This is Tamiya Color Spray Lacquer for Polycarbonate (PS-3 Light Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
Traxxas Pro Scale® Remote Operated Winch for TRX-4 and TRX-6 Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale Winch puts the TRX-4 and TRX-6 even further over the top as the most full-featured and authentic trucks on the trail. The new winch performs as realistically as it looks, and is a truly functional tool for off-road exploration and adventure. The included fob-style remote allows you to extend and retract the high-strength winch line with the touch of a button. The rugged, heavy-duty hook is made of metal for reliable performance and lasting durability, and the high-torque motor gives the winch a 10-pound maximum capacity. That’s plenty of pull to get your machine out of trouble, conquer impossible terrain challenges, and assist other trucks. QUICK FEATURES ON PRO SCALE WINCH (#8855) Full-function, remote-operated Line In and Line Out control 4.5kg of maximum weight capacity Over four feet of high-strength reinforced line with rugged steel hook Convenient fob-style remote with two user-selectable channels Waterproof winch and remote for all-weather durability Free spool feature allows fast line extraction manually Connects directly to battery power via the XL-5 HV speed control’s accessory plug Overload protection prevents overheating Compatible with all TRX-4 and TRX-6 models Built-in electronics for easy installation Single-wire hookup does not require receiver access Additional mounting holes for flat-surface installation Easy to adapt to custom builds and aftermarket bumpers Convenient 2-Channel Remote The fob-style remote is easy to keep handy on a keychain or lanyard, and small enough to mount directly on the transmitter. Two channels are selectable, allowing front and rear winches to be installed and controlled independently. Switching channels only takes a moment—just press and hold the remote’s Channel Select button. Free Spool For quick line access, the Pro Scale Winch is equipped with a free spool release button. Holding the button allows the spool to freewheel so you can quickly extract as much line as you need by hand. 4.5kg of Pulling Power With a maximum weight capacity of 4.5kg, the Pro Scale Winch has all the pulling power you need to get unstuck, out of trouble, over obstacles, and rescue other trucks on the trail. No matter how hard you work the winch, it won’t draw down receiver amperage—the winch gets its power directly from your TRX-4 or TRX-6’s battery, via the XL-5 HV’s accessory plug. Automatic Brake Whether you're using Line In to pull your truck up an incline or Line Out to control a descent, the Pro Scale Winch's automatic brake will prevent the line from unwinding when the winch is unpowered. PRO SCALE WINCH (#8855) INCLUDES: Remote-operated winch with built-in electronics High strength reinforced winch line Fob-style 2-channel remote Heavy-duty steel hook Realistic fabric hook strap Line retainer, hardware, and instructions

1.195,-

1.295,-

KJØP
-8%
Winch, TRX-4® and TRX-6® (requires #8857 wireless remote) Pro Scale® winch for TRX-4® and TRX-6® models. Requires 8857 wireless remote. For the full winch kit, see part 8855.

899,-

999,-

KJØP
-10%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png