Hopp til innhold

Nye produkter

Art.nr: 30107200
Copied
QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

KJØP
-6%
Art.nr: FUSEW-113
Copied
Fuse Overgang - Male Traxxas til Female XT60

95,-

KJØP
Art.nr: TA-25C-6750-4S1P
Copied
4S LiPo til blant annet multikopter. Leveres med ferdig loddet XT90-plugg

1.499,-

1.699,-

KJØP
-12%
Art.nr: 24136
Copied
About the 1966 Volkswagen 1300 Beetle Even in this age of sophistication, the popularity of the Volkswagen “Beetle” has not diminished. The original design dates back to the 1930’s when Dr. Ferdinand Porsche provided the design framework for the “People’s Car.” Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen’s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector’s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come.

259,-

KJØP
Art.nr: 58607
Copied
The latest model to appear in the expanding TT-02 chassis line-up is this version of the R&D Sport-run Subaru BRZ, a car entered in the GT300 class of the Japanese Super GT series. While the car retains the general atmosphere of the road-going BRZ, it has been significantly modified for the racing series, with a racy wide and low form. Subaru’s motorsports arm STI tuned the 2-liter 4-cylinder boxer, which has an output of 350ps and impressive torque of 45kgf·m. The car enjoyed positive progress in the 2014 season with a number of promising qualifying performances leading to improved results later in the year. This model recreates the car as it appeared in Round 2 of the season in Fuji.   Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.   SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type TT-02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Included Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction type Suspension Fully Independent Double Wishbone Terrain Use On-Road

1.795,-

1.995,-

KJØP
-10%
KJØP
Art.nr: 3366VB
Copied
Louise LT3366VB - CR-CHAMP 1.0" Super-Soft Crawler Tires with Foams on Wheels (2) 1.0" crawler tires for: Traxxas 1/18 TRX-4M (Stock tires use a firmer rubber and no foams - 57x25.4mm) Axial 1/24 SCX24 (Stock tires are aprox. 48-54mm in diameter, so there can be some tire rubbing on the body etc) 1.0" CR-CHAMP Specs: Hex: 7mm Mounted on 1" black wheels Tire diameter: 57.1mm Tire width: 22.8mm

159,-

179,-

KJØP
-11%
Art.nr: B-60C-5000-5S1P
Copied
5s 5000mAh 60C LiPopakke som leveres med ferdig påloddet XT90 plugg og XH balanseringskabel. Passer som drivbatteri til 700 size heli. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 5S 18.5V Vekt: 594gram Størrelse: 161x45x37mm Strømplugg: XT90 Product details in english Gens ace lipo 5000mAh 5S1P 60C lipo battery pack has remarkable stacking technology which enables single cell capacities of 5000mAh. With high discharge performance and high energy density.Gens ace batteries provide high quality, reliable power ,this battery fits for 700 size heli, scale soaring. Specs Capacity: 5000mAh Voltage: 18.5V/5S Discharge Rate: 60C Weight: 594g Size: 161*45*37mm

1.249,-

1.449,-

KJØP
-14%
Art.nr: HN001-02C
Copied
RUBY Needle & Nozzle Set 1.0mm This is an optional 1 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun.

149,-

159,-

KJØP
-6%
Art.nr: HN001-02B
Copied
RUBY Needle & Nozzle Set 0.8mm This is a spare 0.8 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun.

149,-

159,-

KJØP
-6%
Viser 3421 til 3430 (av 14968 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png