Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lakk & Pensler / Airbrush / Hobbynox 001-02B RUBY Needle & Nozzle Set 0.8mm
-6%

Hobbynox 001-02B RUBY Needle & Nozzle Set 0.8mm

Art.nr: HN001-02B

149,-

159,-

- 6%
Hobbynox

Hobbynox
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RUBY Needle & Nozzle Set 0.8mm

This is a spare 0.8 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun.

Produsent

Hobbynox

Hobbynox

Relaterte produkter

 

Hovedbilde Hobbynox 001-02A RUBY Needle & Nozzle Set 0.5mm Hovedbilde Hobbynox 001-02A RUBY Needle & Nozzle Set 0.5mm
Hobbynox 001-02A RUBY Needle & Nozzle Set 0.5mm
Art.nr: HN001-02A
Copied
RUBY Needle & Nozzle Set 0.5mm This is an optional 0.5 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun

129,-

139,-

KJØP
-7%
Hovedbilde Hobbynox 01700 Airbrush Holder 2+2 Hovedbilde Hobbynox 01700 Airbrush Holder 2+2
Hobbynox 01700 Airbrush Holder 2+2
Art.nr: HN017-00
Copied
Airbrush Holder 2+2 A handy clamp-on airbrush holder unit that holds 2+2 airbrushes that works with most airbrushes on the market.   Holds up to 4 airbrushes at the same time Attaches easily to your airbrush table or bench with the built in clamp screw A must-have for every airbrush hobbyist & professionals Can be used together with our air regulator unit so that you have an additional moisture trap filter and air adjustment more close-by than down at the compressor!

129,-

KJØP
Hovedbilde Hobbynox Airbrush Compressor 1/6HP with 3L Tank ... Hovedbilde Hobbynox Airbrush Compressor 1/6HP with 3L Tank ...
Hobbynox Airbrush Compressor 1/6HP with 3L Tank ...
Art.nr: AS186A
Copied
Hobbynox AS186A Airbrush Compressor This is an air compressor that fits most airbrushes with up to 0.8 mm nozzles and that don't consume more then 20-23L of air per minute. Features: Can be used for most custom airbrush paint work, model building and other hobbies etc. Oil-free piston type compressor. This allows the compressor to be quiet without atomizing oil into the air stream, wich makes the compressor virtually maintainance free. Air tank for smooth air flow and zero air pulsing Air regulator with pressure gauge, moisture trap filter and adjustable air pressure Auto-start and auto-stop function Steel cover Dual airbrush holders Thermal overload switch Low noise level: 47dB Air tank safety release valve Specifications: Single cylinder piston compressor with air tank and auto-stop / auto-stop function Power: 1/6 HP Speed: 1450/1700 RPM Noise Level: 47dB Max Air Flow: 20-23 litre/minute Auto Start at: 3 BAR (43 PSI) Auto Stop at: 4 BAR (57 PSI) Air Pressure Adjustable Range: 0-4 BAR Air Tank: 3 litre Suitable Airbrush Nozzles: 0.2-0.8 mm Air Outlet Thread: G1/8 (BSP) male Size: L317 x W140 x H360 mm Weight: 8.2 kg

1.895,-

1.995,-

KJØP
-5%
Hovedbilde Hobbynox FLOW-BF Airbrush Bottom Feed 0.5mm 1.8m Hose Hovedbilde Hobbynox FLOW-BF Airbrush Bottom Feed 0.5mm 1.8m Hose
Hobbynox FLOW-BF Airbrush Bottom Feed 0.5mm 1.8m Hose
Art.nr: HN002-01
Copied
Hobbynox FLOW-BF - Bottom-Feed Double-Action Airbrush Set The FLOW-BF is the perfect first bottom-feed double-action airbrush set that is meant to be used with waterbased non-toxic paints such as our Hobbynox Airbrush Colors or similar from Createx or Parma Faskolor etc. It’s suitable for most types of “larger” airbrush work but painting Lexan bodyshells for RC cars and most medium to larger sized models is what the FLOW-BF excels at. The FLOW-BF is a complete set that is ready to be used and it connects easily to the Hobbynox Airbrush Compressors or any other airbrush compressor that has an G1/8 BSP male threaded coupler. Our optional airbrush color bottle adapter (#HN20000) is the perfect companion to the BF when attaching our Hobbynox Airbrush Color bottles directly to the airbrush! Included Items: Hobbynox FLOW-BF - Bottom Feed Airbrush Set Nozzle/Needle: 0.5 mm Paint Cup: 22cc glas jar (optional #HN20000 bottle adapter) Braided Hose: 1.8 m long with G1/8 Female & G1/8 Female threads Compressor Adapter: G1/8 Male to G1/4 Female Tool & Printed Manual  

595,-

KJØP
Hovedbilde Hobbynox RUBY Mini Spray Gun Top Feed 0.8mm 125ml Cup ... Hovedbilde Hobbynox RUBY Mini Spray Gun Top Feed 0.8mm 125ml Cup ...
Hobbynox RUBY Mini Spray Gun Top Feed 0.8mm 125ml Cup ...
Art.nr: HN001-00
Copied
Hobbynox RUBY - Top-Feed Mini Spray Gun Set The RUBY Mini Spray gun is a true workhorse and it’s perfect for booth painting and clear-coating medium to larger models or other hobby sized items. It works equally good with waterbased non-toxic paints such as our Hobbynox Airbrush Colors or similar from Createx or Parma Faskolor and also thinner-based paints and automotive 2K urethane clear-coats. Another good application is spraying Bittydesign Liquid Mask (with the optional 1 mm needle set)! The RUBY is a complete set that is ready to be used and it connects easily to the AS196AW Hobbynox Airbrush Compressor or any other larger air compressor with an airfilter that has an G1/8 BSP male threaded coupler. Note, the printed manual is a little bit unclear regarding the exploded view illustrations etc - please download the pdf manual if you need to see them more clearly! Included Items: Hobbynox RUBY - Mini Spray Gun Set Nozzle/Needle: 0.8 mm Paint Cup: 125 ml plastic with screw-on lid Braided Hose: 3 m long with G1/4 Female & G1/8 Female threads Cleaning Brush, Small Paint Cup Filter & Printed Manual  

379,-

KJØP
Hovedbilde Hobbynox TARA Airbrush Top Feed 0.2/0.3/0.5mm 2cc 1.8m ... Hovedbilde Hobbynox TARA Airbrush Top Feed 0.2/0.3/0.5mm 2cc 1.8m ...
Hobbynox TARA Airbrush Top Feed 0.2/0.3/0.5mm 2cc 1.8m ...
Art.nr: HN003-00
Copied
Hobbynox TARA Top-Feed Double-Action MPC Airbrush Set The TARA is a complete top-feed double-action airbrush set equipped with Micro Pressure Control (MPC) right at the nose of the  airbrush body so you can fine-adjust the airflow very easily. It's a perfect first detail airbrush that is meant to be used with waterbased non-toxic paints such as our Hobbynox Airbrush Colors or similar from Createx, Faskolor or any other thinner viscosity airbrush paints. It’s suitable for most types of small and detailed airbrush work such as small to medium sized models and custom detaied airbrush work. The TARA has an nozzle/tip construction that is optimized for detail work with better atomization of the thinner viscosity paints that is mostly used when painting small items. The TARA is a complete set that is ready to be used and it connects easily to the Hobbynox Airbrush Compressors or any other airbrush compressor that has an G1/8 BSP male threaded coupler. (Note, in the printed manual it wrongly says that the std (installed) needle set is 0.3mm - it's the 0.2mm set that is installed from the factory.) Included Items: Hobbynox TARA - Top Feed Airbrush Set Needle/Tip Sets: 0.2 (installed), 0.3 & 0.5 mm Paint Cup: 2 cc Braided Hose: 1.8 m long with G1/8 Female & G1/8 Female Threads Compressor Adapter: G1/8 Male to G1/4 Female Printed Manual & Tip Tool  

575,-

KJØP
Hovedbilde Traxxas 9333 Body Factory Five ´33 Hot Rod Coupé Clear
Traxxas 9333 Body Factory Five ´33 Hot Rod Coupé Clear
Art.nr: TRX 9333
Copied
Traxxas 9333 Body Factory Five ´33 Hot Rod Coupé Clear Body, Factory Five '33 Hot Rod Coupe (clear, requires painting)/ foam pads (front & rear)/ decal sheet (includes front grille, side mirrors, headlights, tail lights, mounting hardware) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design andHobbynox paints makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Includes body accessories and hardware, decals, and window masking.  

539,-

KJØP
Hovedbilde Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3 Hovedbilde Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3
Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3" WB ...
Art.nr: 3516-00
Copied
Proline 2017 Ford F-150 Raptor Clear Body for 12.3" (313mm) Wheelbase Scale Crawlers This is a 2017 Ford® F-150 Raptor Clear Body for 12.3” Crawlers. Pro-Line is ready to unleash the officially licensed 2017 Ford® F-150 Raptor body for your 12.3” Crawler! This body will completely transform your Truck into an Ultra Scale aggressive Raptor Rig perfect for Rock Crawling. The details from the full-size 2017 Raptor have been faithfully recreated and will give your truck a unique look compared to the sea of old-school classic trucks that have been dominating the crawling scene. This single piece Pro-Line body is very light for a lower center of gravity and improved crawling performance. Window masks, Paint-then-peel overspray film and fully licensed detailed stickers are included to finish off the look. Raise the bar and get your own Pro-Line 2017 Ford® F150 Raptor Body for your 12.3” Crawler now! Features: Officially Licensed 2017 Ford® Raptor Body  Transform your 12.3” Crawler into an Aggressive 2017 Ford® Raptor Lightweight Single Piece Design for Better Crawling Performance Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Four steps to Bash Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Included: 2017 Ford® F-150 Raptor Clear Body for 12.3” Crawler (1 pc) Decal Sheet Window Masks Paint Then Peel Overspray Film Fits: MAXX® (with Extended Body Mount kit #6370-00 sold separately) SCX10™ Vaterra Ascender Element Enduro Other 12.3" Wheelbase Crawlers Specifications: Length:   19.5" (495mm) Width:   7.25" (184mm) Height:   5.75" (146mm) Wheelbase:   12.3" (313mm)

799,-

849,-

KJØP
-6%
Hovedbilde Pro-Line 349900 1946 Dodge Power Wagon Clear Body ... Hovedbilde Pro-Line 349900 1946 Dodge Power Wagon Clear Body ...
Pro-Line 349900 1946 Dodge Power Wagon Clear Body ...
Art.nr: 3499-00
Copied
  This is the ProLine '46 Dodge Power Wagon Clear Body.     FEATURES Fits the Axial SCX10, Vaterra Ascender and other 12.3" (313mm) wheelbase scale crawlers Molded from clear genuine GE Lexan Separate round headlights allow LED light installation (LED lights not included) Separate cab and bed for high degree of realism Textured rocker panels, realistic undercuts     INCLUDES '46 Dodge Power Wagon Clear Body Window Masks and Decal Sheet     REQUIREMENTS Lexan safe spray or brush-on paint     SPECIFICATIONS Overall; Length: 18.6" (472mm) Width at Center: 5.75" (146mm) Width at Fenders: 9" (229mm) Height: 5.75" (146mm) Wheel Base: 12.3" (312mm) Cab Only; Length: 10.25" (260mm) Width 5.75" (146mm) without fenders Height: 5.75" (146mm) Bed Only; Length: 8.37" (213mm) Width: 5.75" (146mm) Height: 2.75" (70mm)

799,-

KJØP
Hovedbilde Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ... Hovedbilde Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ...
Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ...
Art.nr: 3509-00
Copied
This is a 2017 Ford® F-150 Raptor Clear Body for TRX-4®. Pro-Line is ready to unleash the officially licensed 2018 Ford® F-150 Raptor body for your Traxxas® TRX-4®! This body will completely transform your Truck into an Ultra Scale modern Raptor Rig perfect for Rock Crawling. The details from the full-size 2017 Raptor have been faithfully recreated and is designed to drop right onto the stock 12.8" wheelbase TRX-4! This Pro-Line body is much lighter than the stock TRX-4® body for lower center of gravity and improved crawling performance. Window masks, Paint-then-peel overspray film and fully licensed detailed stickers are included to finish off the look. Raise the bar and get your own Pro-Line 2017 Ford® F150 Raptor Body for your TRX-4® now!   Features Officially Licensed 2017 Ford® Raptor Body with camper shell Direct Fit Onto the 12.8" Wheelbase TRX-4® Transform your TRX-4® into an Aggressive 2017 Ford® Raptor Lighter Than Stock for Improved Performance Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Four steps to Bash Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck   Including 2017 Ford® F-150 Raptor Clear Body for TRX-4® (1 pc) Decal Sheet Window Masks Paint Then Peel Overspray Film   Fits 12.8" Wheelbase TRX-4® (Land Rover Defender & Tactical Unit) *Stock Inner Fender Wells are do not fit this body

659,-

699,-

KJØP
-6%
Hovedbilde Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ... Hovedbilde Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ...
Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ...
Art.nr: 3552-00
Copied
Pro-Line ’70s Rock Van Clear Body for 313mm Wheelbase Scale Crawlers   This is the '70s Rock Van Clear Body for Scale Crawlers. It's time to get your retro creative juices flowing with the new Pro-Line '70s Rock Van body! Based on the iconic Vans of the mid-late 1970s, the Rock Van provides a blank canvas to recreate the most awesome vans of yesteryear. From cable news vans, to ice cream trucks, to overlanding rigs, to transporting around your favorite team of ex-US Special Forces: the possibilities are endless! The '70s Rock Van features super-detailed front grille sections, oversized fender flares, and two sets of add-on Bubble Windows, porthole and teardrop, to give your van the ultimate retro look. The decal sheet also includes a full set of yellow & orange pinstriping. Just paint it in your favorite solid color and you are ready to go. This body fits all popular 12.3" wheelbase crawlers outfitted with 2 sets of tall body posts. Features: Blank Canvas to Inspire Creative Builds Based on Iconic 1970s Vans Add-on Bubble Windows for Extra Retro Style Made in the USA, since 1982 Included: '70s Rock Van Clear Body (1 pc) Detailed Decal Sheet Window Masks Paint-then-peel Overspray Film Included Fits: Traxxas TRX-4 Sport Traxxas TRX-4 Sport Kits Traxxas TRX-4 Sport with TRAXX Traxxas TRX-4 Ford Bronco Traxxas TRX-4 Chevy Blazer Traxxas TRX-4 Mercedes-Benz G500 SCX10™ Ascender® Element Enduro Other 12.3" Wheelbase Crawlers Note, all of the above crawler chassis may need additional custom fitted long body posts front and rear Specs: Length: 514mm Width: 208mm Height: 165mm Wheelbase: 312mm

595,-

695,-

KJØP
-14%
Hovedbilde Pro-Line 354600 Jeep Wrangler JL Unlimited Rubicon ... Hovedbilde Pro-Line 354600 Jeep Wrangler JL Unlimited Rubicon ...
Pro-Line 354600 Jeep Wrangler JL Unlimited Rubicon ...
Art.nr: 3546-00
Copied
Jeep Wrangler JL Unlimited Rubicon Clear Body for 12.3" (313mm) Wheelbase Scale Crawlers   This is the Pro-Line Jeep® Wrangler JL Unlimited Rubicon Clear Body. The new Jeep Wrangler JL Unlimited Rubicon body is ready for adventure! Rugged, tough and soon to be classic styling are now available from Pro-Line for 1:10 Scale Builders and Rock Crawler owners. It's fully licensed Jeep styling is a perfect match to the full-size counterpart and is destined to become an automotive classic. The JL features an all-new rear tail-light and tail-gate design, bigger windows for better visibility, higher clearance fenders to allow for bigger tires and new hood details that all come together to give you a better rock crawling experience. If you are Jeep fan, then the new Wrangler JL Unlimited Rubicon is a must-have body for your 12.3" rig. Get yours now! Amazing Jeep Gladiator Licensed Scale Looks Fits 12.3" Wheelbase Rigs Paint-then-peel Overspray Film Included Great Body Platform for a Unique Scale Build! Made with Crystal Clear Polycarbonate Extended rear body posts are required - NOT INCLUDED Four steps to Adventure Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Decal your body (decal sheet included) 4.) Mount your new body onto your truck Made in the USA, since 1982   Included Jeep® Wrangler JL Unlimited Rubicon Clear Body (1 pc) Window Masks Detailed Decal Sheets Paint-then-peel Overspray Film Included   Fits SCX10 Ascender Element Enduro Other 12.3" Wheelbase Crawlers

459,-

749,-

KJØP
-39%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png