Hopp til innhold

Traxxas biler

Populært i denne kategorien

Art.nr: SW-0267MG
Copied
Savöx SW-0267MG - Micro Size Digital Servo, DC Motor, Waterproof, Metal Gears The SW-0267MG is a budget friendly, waterproof, high torque, digital micro servo. The wire enters vertically from the bottom of the case. This is a great upgrade if you're looking to drive your RC vehicle in any condition yet unable to use higher voltage to obtain more power. This is an excellent replacement for Traxxas 2065A/2065R/2065T. Features: 3-Pole Brushed Motor Fast Response Composite Case Ball Bearings Metal Gears Specs: Torque @ 4.8V: 5kg Torque @ 6V: 6kg Speed @ 4.8V: 0.16s/60° Speed @ 6V - 0.135s/60° Size: L22.6 x W12.6 x H23.5mm Weight: 14g

399,-

KJØP
Art.nr: TRX 2053
Copied
This is a replacement Gear set for the Traxxas 2055 Servo. FEATURES Grey plastic and brass construction. INCLUDES One 25 and 41 tooth output gear.  One 35 and 16 tooth gear (gear #7).  One 10 and 62 tooth gear (gear #9).  One 10 and 50 tooth gear (gear #11).  One 10 tooth pinion gear.  One grey plastic bushing race.  One grey plastic output gear race.  Two brass output gear bushings.  One exploded view. REQUIREMENTS Assembly in servo.  Remainder of servo components.

59,-

KJØP
Art.nr: TRX 2065R
Copied
Traxxas 2065R Metal Gear Micro Servo The new waterproof 2065R metal gear servo is the perfect upgrade for the shifting mechanisms found on TRX-4 and 1/10 Summit models. It is also a great performance steering upgrade for all LaTrax vehicles.   Replaces the 2065X servo Fully waterproof Fits TRX-4 and 1/10 Summit Fits steering in LaTrax models Power: 2.3kg/cm Speed: 0.20 sec/60° All metal geared Fits: Alle TRX-4M 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² Summit TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

489,-

529,-

KJØP
-8%
Art.nr: TRX 2065T
Copied
Traxxas 2065T Replacement part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender® TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

419,-

439,-

KJØP
-5%
Art.nr: TRX 2072A
Copied
Gear set (for 2070, 2075 servos)

49,-

KJØP
Art.nr: TRX 2074
Copied
This is the replacement Servo Case and Gasket Set for the Traxxas                 2056 - and 2075 (we don't stock) Servos FEATURES: Three piece plastic case molded in blue and black color           Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic)           One Middle Case (blue plastic)           One Lower Case (black plastic)           One Upper Case Gasket           One Lower Case Gasket           One Output Shaft O-Ring           Four Case Screw O-Rings REQUIRES: Assembly  

79,-

KJØP
Art.nr: TRX 2075
Copied
Traxxas 2075 - Waterproof Digital Servo The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°. SPECS:    Ball Bearing Digital High-torque Power: 125 oz-in (9kg/cm) Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

549,-

589,-

KJØP
-7%
Art.nr: TRX 2075R
Copied
Servo, digital high-speed, metal gear (ball bearing), waterproof

699,-

749,-

KJØP
-7%
Art.nr: TRX 2085RL
Copied
Traxxas 2085RL - Digital High Torque Metal Gear BB WP Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof The High Torque Maxx Servo is the ultimate steering upgrade for your X-Maxx®, XRT®, or Maxx®. With a staggering 46.8kg/cm of torque and full steel gears, the High Torque Maxx Servo delivers total steering authority on even the largest Sledgehammer® tires. The case features an anodized aluminum center section with cooling fins and ball bearings for increased precision. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx, X-Maxx®, and XRT®. Does not fit other vehicles. FEATURES: Fits X-Maxx, XRT, and Maxx trucks Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management® (TSM) 46.8kg/cm torque at 6.0 volts 0.13 sec/60° at 6.0 volts Full steel gears Full ball bearings Aluminum center case with cooling fins Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT®

1.495,-

1.695,-

KJØP
-12%
Art.nr: TRX 2086
Copied
This is the Servo Case and Gaskets for the Steering Servoused on the Traxxas X-Maxx Monster Truck. FEATURES Replaces damaged case sections and gaskets Plastic case sections with metal insert INCLUDES Aluminum Heat Sink Top, Center and Bottom Case Sections with Metal Insert Two Rubber Gaskets Eight 1.5mm O-Rings Output Gear O-Ring

299,-

KJØP
Art.nr: TRX 2087
Copied
This is the Gear Set for the Steering Servo used on the Traxxas X-Maxx Monster Truck. FEATURES Replaces worn or broken gears INCLUDES Output GearTop, Center and Bottom Reduction Gear Upper and Lower Ball Bearings Parts List

189,-

KJØP
Art.nr: TRX 2087R
Copied
Restore the performance of your 2085R or 2085RL servo with this replacement metal gear set and bearings.. Does not fit other servos.

399,-

429,-

KJØP
-7%
Art.nr: TRX 2087X
Copied
Traxxas 2087X Gear Set for Servo 2085X/2085XL Restore the performance of your 2085X or 2085XL servo with this replacement metal gear set. You can also use this gear set to upgrade the standard 2085 servo to an all-metal gear train (must swap all gears). Bearings not included.

359,-

KJØP
Art.nr: TRX 2251
Copied
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)

149,-

KJØP
Art.nr: TRX 2252
Copied
Gear set, metal (for 2250, 2255 servos)

369,-

399,-

KJØP
-8%
Art.nr: TRX 2253
Copied
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)

239,-

KJØP
Art.nr: TRX 2254
Copied
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)

239,-

KJØP
Art.nr: TRX 2262
Copied
High Voltage BEC kit for all TRX-4 chassis Traxxas new High-Torque servos represent a huge power upgrade for the TRX-4. When installing a high-torque servo from Traxxas, it is required that you use the High-Voltage BEC kit (#2262) and a steel servo horn (#8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Note: When used with Traxxas 2250 servo the maximum voltage is 2S LiPo When used with Traxxas 2255 servo the maximum voltage is 3S LiPo

429,-

459,-

KJØP
-7%
Art.nr: TRX 2270
Copied
Traxxas 2270 High-Torque Digital Metal Gear Servo The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 17kg/cm of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup. SPECIFICATIONS: Torque: 236 oz-in @ 6.0V Speed: 0.175 sec/60° @ 6.0V Waterproofing: Sealed case with O-ring Gears: Metal Case: Plastic with full ball bearings Dimensions: 55 mm H x 44.5 mm L x 20 mm W Length: 55 mm Height: 44,5 mm Width: 20,0 mm Speed at 6,0V: 0,175 sec/60° Torque at 6,0V: 17 kg/cm Features: Digital , Metal Gears

749,-

799,-

KJØP
-6%
Art.nr: TRX 2271
Copied
Servo Case for 2270 Servo case/ gaskets (for 2270 waterproof servo) Replacement waterproof case for 2270 high-torque metal-gear servo. Includes gaskets. Does not fit other servos.

119,-

139,-

KJØP
-14%
Art.nr: TRX 2272
Copied
Gear Set Metal for Servo 2270 Gear set (for 2270 waterproof servo) Replacement metal gear set for 2270 Servo. Does not fit other servos.

219,-

KJØP
Art.nr: TRX 2280
Copied
Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case New Top-of-the-Line 1/10 Servo with Full Aluminum Case! 2280 Specs & Features: High Torque: 43kg/cm 87% more torque than stock Sledge servo 5X more torque for TRX-4 with 2262 external BEC High Speed: 0.13 sec/60° Twice as fast as stock Sledge Full Aluminum Heat Sink Case Full Steel Gears with steel output Brushless motor technology Waterproof Dual ball bearings Factory fit for drop-in installation into 1/10 scale Traxxas models* * Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

1.695,-

1.995,-

KJØP
-15%
Art.nr: TRX 3791
Copied
Traxxas 3791 LED Lights Front (Requires Bumper #3735) Bandit, Rustler 2WD LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires #3735 front bumper for 2WD Rustler® or Bandit®) Replacement front LED light bar for #3794 LED Light Set.

239,-

259,-

KJØP
-8%
Art.nr: YE-0030
Copied
Yeah Racing Waterproof Micro Servo For Traxxas TRX-4 TRX-6 #YE-0030 Description: Upgrade micro servo for diff locking and gear changing on Traxxas's line of scale crawlers! Features full metal gears for utmost durability and reliability on the trail! Being waterproof means you can take this servo anywhere on the trail and not worry about it failing! Long wires and servo horns included if you want to use this servo in other applications as well! Material: Plastic Case/Metal Gears Color: Blue Feature: For: Traxxas TRX-4 TRX-6 And every TRX-4M models Specification: Torque (4.8V): 1.8kg-cm Torque (6.0V): 2.2kg-cm Torque (7.4V): 2.6kg-cm Speed: 0.15s (4.8V), 0.12s (6.0V), 0.10s (7.4V) Operating Voltage:4.8-7.4V Weight: 16.0g Servo Spline: 25t Gear Type:Copper & Aluminum Size:22.5×12.5×24.0mm Include: Waterproof Micro Servo (1 pc) Servo Horns (2 pcs) Erstatter TRX 2065, 2065X, 2065A, 2065R, 2065T

299,-

329,-

KJØP
-9%
Art.nr: TRX 2255
Copied
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Viser 1 til 25 (av 38 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png