Hopp til innhold

Summit 1/16 Brushed

Populært i denne kategorien

 
Art.nr: TRX 7056
Copied
These are the Front/Rear Center Half Shafts for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Center Half Shaft           One Rear Center Half Shaft           Four U-Joints REQUIRES: Installation on the vehicle

75,-

KJØP
Art.nr: TRX 7057
Copied
These are the Differential and Transmission Yokes for              use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two Yokes           Two 3x10mm Screw Pins REQUIRES: Installation on the vehicle

39,-

KJØP
Art.nr: TRX 7061
Copied
Shocks, GTR composite (assembled, without springs) (2)

189,-

KJØP
Art.nr: TRX 7062
Copied
This is the Traxxas GTR Shock Rebuild Kit. FEATURES: Renews two GTR shocks INCLUDES: Four O-Rings           Two Bladders           Six E-Clips           Four Hollow Balls           Two Shock Rod Ends           Two Pistons           Two Spacers REQUIRES: Installation in shocks

59,-

KJØP
Art.nr: TRX 7063
Copied
These are the GTR Shock Shafts for use on the                    Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Aluminum construction           Silver in color INCLUDES: Two Shock Shafts REQUIRES: Installation inside shocks SPECS:    Length: 25.15mm (0.99")           Diameter: 2.5mm (0.1")

49,-

KJØP
Art.nr: TRX 7065
Copied
These are the Caps and Spring Retainers for use on the shocks on the                    Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two Upper Caps           Four Hollow Balls           Two Bottom Caps           Two Upper Retainers           Two Lower Retainers REQUIRES: Installation on the shocks

45,-

KJØP
Art.nr: TRX 7066
Copied
These are the Shock Bodies for use on the Traxxas GTR Shocks. FEATURES: Molded composite construction           Black in color INCLUDES: Two GTR Shock Bodies REQUIRES: Installing all shock components into shock bodies SPECS:    Length: 22.15mm (0.87")           Diameter: 9.8mm (0.39")

39,-

KJØP
Art.nr: TRX 7067
Copied
These are the Shock Pistons and Travel Limiters                          for the Traxxas Rally VXL. FEATURES: Red plastic shock pistons with 2 x.5mm holes           Back plastic travel limiters INCLUDES: Four shock pistons           Four travel limiters REQUIRES: Installation in shocks SPECS:    Thickness:        Piston (.06" / 1.5mm)   Limiter (.16" / 4mm)           Inside Diameter:  Piston (.09" / 2.5mm)   Limiter (.09" / 2.5mm)           Outside Diameter: Piston (.30" / 7.6mm)   Limiter (.19" / 5mm)

29,-

KJØP
Art.nr: TRX 7077R
Copied
This is the Gear Cover/Motor Mount Hinge for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover/Motor Mount Hinge Post           One 3x8mm Cap Head Screw with Flat and Split Washers           One 3x8mm Button Head Screw REQUIRES: Installation on the vehicle

49,-

59,-

KJØP
-17%
Art.nr: TRX 7078
Copied
This is the Complete Differential Assembly for use on the                   Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel and nylon construction INCLUDES: One Complete Differential Assembly REQUIRES: Installation on the vehicle

289,-

KJØP
Art.nr: TRX 7079
Copied
This is the Differential Ring and Pinion Gear for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: One Diff Ring Gear           One Pinion Gear REQUIRES: Installation on the vehicle

149,-

KJØP
Art.nr: TRX 7080
Copied
These are the Front and Rear Differential Cover Plates          for use on the Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front and One Rear Diff Cover Plate           Two O-Rings           Two Gaskets           Three 2x14mm Button Head Screws REQUIRES: Installation on the vehicle

39,-

Ikke på lager
Art.nr: TRX 7082
Copied
This is the Differential Gear Set for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: Two Output Gears           Three Spider Gears           Two Differential Output Shafts           Three 1.5x6mm Pins           Two 1.5x8mm Pins REQUIRES: Installation on the vehicle

129,-

KJØP
Art.nr: TRX 7090
Copied
This is the Motor Plate for use on the                 Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Aluminum construction           Blue in color INCLUDES: One Motor Plate REQUIRES: Installation on the engine SPECS:    Length: 50mm (2")           Width: 35mm (1.4")           Thickness: 2mm (0.08")

49,-

59,-

KJØP
-17%
Art.nr: TRX 7091
Copied
These are the Front and Rear Gearbox Halves for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Front and Rear Gearbox Halves REQUIRES: Installation on the vehicle  

59,-

KJØP
Art.nr: TRX 7092
Copied
This is the Input and Output Shaft for use on the                Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction           Black in color INCLUDES: One Input Shaft           One Output Shaft REQUIRES: Installation on the vehicle

89,-

KJØP
Art.nr: TRX 7093
Copied
This is the Transmission Gear Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon input and output gears           Steel idler gear INCLUDES: 18T Input Gear           25T Input Gear           13T Idler Gear           35T Output Gear           3x13.75mm Screw Pin REQUIRES: Installation on the vehicle

129,-

KJØP
Art.nr: TRX 7118
Copied
These are the Pushrods and Hollow Balls for use on the                  Traxxas 1/16 E-Revo, Slash, Summit and Rally VXL 4WD RTR. FEATURES: Molded composite construction           Red in color INCLUDES: Four Pushrods           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 70mm (2.8")           Diameter: 5mm (0.20")

75,-

KJØP
Art.nr: TRX 7131
Copied
This is the Front Suspension Arm Set for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Upper Right Suspension Arm           One Lower Right Suspension Arm           One Upper Left Suspension Arm           One Upper Right Suspension Arm REQUIRES: Installation on the vehicle

109,-

119,-

KJØP
-8%
Art.nr: TRX 7132R
Copied
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase extension to 1/16 E-Revo in just minutes! Lengthening the wheelbase of your 1/16 E-Revo allows you to accelerate hard through the roughest track sections with increased stability and confidence. The longer wheelbase also helps keep the 1/16 E-Revo planted for holeshot launches and hold full-on power through the turns. Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the extended rear arms allow the wheelbase to be quickly tuned for various track conditions.

99,-

KJØP
Art.nr: TRX 7138
Copied
These are the Front and Rear Toe Links for use on the                Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Red in color INCLUDES: Four Front/Rear Toe Links           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 86mm (3.4")           Diameter: 5mm (0.20")

75,-

KJØP
Art.nr: TRX 7152
Copied
This is the Complete Slipper Clutch for use on the                 Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: One Slipper Clutch Hub           One Clutch Pad           One Spring           One 3mm Locking Nut           1.5x6mm Pin REQUIRES: Installation on the vehicle

59,-

Ikke på lager
Art.nr: TRX 7154
Copied
These are the Wheel Hubs and Axle Pins for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Four Wheel Hubs           Four 1.5x8mm Axle Pins REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm

39,-

KJØP
Art.nr: TRX 7155
Copied
These are the Steel Rocker Arm Posts for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: Four Rocker Arm Posts REQUIRES: Installation on the vehicle SPECS:    Length: 18.5mm (0.73")           Diameter: 4mm (0.16")

39,-

KJØP
Art.nr: TRX 7156
Copied
This is the Long Travel Rocker Arm Set for the Traxxas Summit VXL. FEATURES Plastic construction Grey in color INCLUDES Eight long travel rocker arms Eight plastic bushings REQUIREMENTS Installation on to Summit SPECIFICATIONS Distance from Mounting Hole to Arm Hole: 22mm (0.83")

59,-

KJØP
Viser 26 til 50 (av 86 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png