Biler

Hovedbilde Tamiya 46703 X-SA Hornet XB 1:10

Art.nr: 46703

Copied

Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day. TECHNICAL DETAILS: This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. The chassis comes ready-assembled. Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. Sealed rear gearbox protects diff gear during off-road running. Requires separately sold R/C equipment, battery pack and charger.

2.195,-

2.495,-

KJØP

-12%

Tamiya 47304 1/10 Fighting Buggy 2014 2WD Kit

Art.nr: 47304

Copied

This is the Electric Powered, Radio Controlled. 1/10 scale Fighting Buggy 2014 from Tamiya. FEATURES Chassis: FRP (fiber reinforced plastic) 0.098" (2.5mm) thick Drive: Rear wheel with gear case and direct drive setup Gear Case: Die cast with transparent plastic cover Motor: 540 brushed Body: ABS resin with aluminum roof panel and wing Steering: Bell crank type Suspension: Front, independent, double trailing arm, die cast front rear suspension arms, rear, free floating progressive damping (FFPDS) with transverse shock and progressive spring Shock: One rear, aluminum body with separate oil reserve tank Wheels: Three-piece Tires: Ribbed front, rear spike Front Bumper: Reinforced resin with integrated metal bar Camber: Non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES Fighting Buggy 2014 with Body, Shocks, Brushed Motor, Tires, Wheels, 06 Module 15T Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel Battery: 7.2V stick pack, NOTE chassis was originally set up for a LF1100 6.6v pack, a 7.2V stick pack can be used by not installing the K2 rear battery holder Battery Charger: To match selected battery Paint: Tamiya TS plastic model paint recommended Building and track equipment SPECIFICATIONS Vehicle; Length: 16.3" (415mm) Width: 8.7" (220mm) Height: 6.1" (155mm) Body; Length: 14.4" (366mm) Width: 5.9" (149mm) Height: 4.2" (108mm) COMMENTS To paint model to match picture on box, order the following Tamiya colors; TS-15 Blue X-2 White X-7 Red X-8 Lemon Yellow X-11 Chrome Silver XF-1 Flat Black XF-15 Flat Flesh

3.995,-

4.695,-

KJØP

-15%

Tamiya 47305 Toyota Land Cruiser 40 Red Painted Body ...

Art.nr: 47305

Copied

The Toyota Land Cruiser 40, a world-famous off-road vehicle that needs little introduction, was produced for almost 25 years and much loved for its durability and adaptability. This version of the vehicle has been given the pick-up truck treatment. It’s mounted on Tamiya’s fun to drive GF01 4WD wheelie chassis. The GF01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Volkswagen Type 2 and the Farm King Wheelie. Whereas those kits featured a 2WD and easy to wheelie platform, the GF01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes. What makes this version of the Toyota Land Cruiser 40 Pick Up unique is the inclusion of a pre-painted body set to accelerate the building process. Feature: Scale : 1/12 Construction Type : Assembly kit Terrain Use : Multi-Purpose Drive-train : 4WD Drive Type : Gearbox Drive Line : Dog bone Differential type : Gear Suspension : Fully independent double wishbone Steering mechanism : Bell-crank Shock damper : Friction damper Shock Damper Material: Plastic Tire Type: Rubber Tire tread : Block-pattern Body material : Polycarbonate Chassis material : Plastic ESC: Included ESC model: TBLE-02S LED Light buckets: No LED lights: No Motor : 540-brushed type Bearings : Plastic bushing Adjustable camber: Fixed Adjustable toe angles : Front only Adjustable ground clearance : Yes Adjustable gear ratio : Yes Adjustable wheelbase : Fixed Adjustable track width: Fixed Adjustable shock angle: Fixed Special feature 1 : The polycarbonate body accurately recreates the form of the Land Cruiser 40 with pick-up style rear end. Comes Pre-Painted in RED. Special feature 2 : The 4WD GF01 chassis provides an excellent feeling of big scale, and uses front and rear differentials in a sealed gearbox integrated in the frame. Special feature 3 : 4-wheel double wishbone suspension utilizes friction dampers. Special feature 4 : 5-spoke wheels are fitted with massive 110mm-diameter tires. Special feature 5 : A driver figure is included. Special feature 6 : Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors) Special feature 7 : Includes 540 Torque Tuned motor. Specification: Length: 333mm Width: 244mm Height:242mm Include: Tamiya 1/12 GF01 Red Painted Body w/ESC EP For Toyota Land Cruiser 40 Pick Up (1 Set) Motor: 540-brushed type (1 Pc) ESC Model: TBLE-02S (1 Pc) Red Painted Body (1 Pc) Wheel (4 Pcs) Tires (4 Pcs) Required: 7.2 battery & charger 2-channel radio gear Servo AA batteries PS Spray Tools

2.795,-

2.995,-

KJØP

-7%

Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...

Art.nr: 47308

Copied

Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI NO ESC Volkswagen Golf Mk.1 Racing Group 2 byggesett. Racing utgave av førstegenerasjons golf fra 70-tallet. Dekaler til karosseriet medfølger. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri ESC (fartskontroller) Batterilader PS lakk Anbefales: Tamiya kulelagre Yeah Racing kulelagre Anbefalte farger: PS-1 White PS-6 Yellow PS-7 Orange PS-31 Smoke PS-34 Bright Red TS-12 Oranger TS-16 Yellow TS-26 Pure White TS-29 Semi Gloss Black TS-49 Bright Red Fra produsenten: Length: 329mm. Image shows assembled and painted kit. The Comeback of a Classic! This R/C model assembly kit depicts the striking Kamei-sponsored Group 2 VW Golf which made a splash in 1970s touring car racing. The polycarbonate body accurately captures the form of the racing Golf, with wide front fenders and a sporty front spoiler. Stickers are included to recreate sponsor logos, numbers, etc. M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Racing slick tires feature tire inserts. Specifications ●Length: 329mm, Width: 175mm, Height: 120mm ●Wheelbase: 210mm　●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 25/55mm ●Monocoque Frame ●3-Bevel Differential Gear ●Front-Wheel 2WD ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio = 5.8:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately) Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

1.495,-

1.595,-

KJØP

-6%

Tamiya 47326 1/10 TT-02R Chassis Kit

Art.nr: 47326

Copied

This is the 1/10 scale, electric powered, radio controlled, Tamiya TT02R On-Road Chassis Kit. The following Hop Up Option Parts are included; 53159 4mm Aluminum Flange Lock Nut (Blue) 54247 3x18mm Aluminum Turnbuckle Shaft (Blue) x2 54501 TT-02 Aluminum Propeller Shaft 53642 5mm Aluminum Ball Connector (Blue) 54500 TT-02 High-Speed Gear Set (68T) 54502 TT-02 Aluminum Propeller Joint Take the TT-02 Racing!! This variant of the efficient 4WD TT-02 chassis includes a range of option parts, allowing you to compete at the front of the race! Aluminum rear uprights give 3-degree toe-in for more stable cornering, while an aluminum motor mount makes for greater rigidity and enhanced heat dissipation. A highly reliable drivetrain employs full ball bearings, aluminum propeller shaft and center cups, plus metal drive shafts and joint cups. Suspension is fitted with CVA oil dampers and black coil springs; they provide superior cushioning and improved traction. The kit also includes a TT-02 high speed gear set (68T). FEATURES Chassis: ABS resin bathtub type minimizes contact with the road Drive: Four wheel, aluminum shaft driven Motor Mount: Aluminum Differential: Gear type Wheels: Ten spoke, black in color Tires: Slick rubber with foam inserts Ball Bearings: Shielded Suspension: Fully independent double wishbone Shocks: CVA oil-filled Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis, newly-designed aluminum uprights provide 3 degrees of toe-in for better stability when cornering Steering: Bellcrank type Bumper: Front, urethane INCLUDES Tamiya TT0R Chassis, with Tires, Wheels, Shocks, Decals and Instructions REQUIREMENTS Radio: 2-channel with high speed steering servo Motor: Tamiya Super Stock brushed motor recommended Electronic Speed Control: To match selected motor Battery: 7.2V NiMH Battery Charger: To match selected battery Body: 1/10 scale on-road Paint, building and track equipment SPECIFICATIONS Length: 14.8" (376mm) Width: 7.2" (182mm) Wheelbase: 10.1" (257mm)

1.995,-

2.395,-

KJØP

-17%

Tamiya 47329 1/24 Metal Dump Truck GF-01 4WD Limited ...

Art.nr: 47329

Copied

This is the Electric Powered, Radio Controlled 1/24 scale Limited Edition Heavy Dump Truck Kit from Tamiya. **Body parts are molded in black, with metal-plated chassis** **parts and new sticker designs.** FEATURES Chassis: GF-01 lightweight monocoque resin with wheelie bar to prevent flipping over backward during wheelies Drive: 4 wheel, dogbone driveline Motor: Tamiya Sport Tuned RS-540 brushed, center mounted Electronic Speed Control: TBLE-02 Differentials: Bevel gear type Gearboxes: Sealed Cab and Rear Bed: ABS plastic, black in color, bed may be displayed in flat or raised position by changing the position of the two stays and snap pins in the body mounts. It is not advisable to put objects in the rear bed, or drive the model with the bed elevated **bed is not remote controlled** Front Bumper: Spring loaded Shocks: Plastic body friction, not oil-filled Suspension: Four wheel independent double wishbone Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm)diameter Wheels: Metal plated plastic 1.9" (49mm) diameter, 2.3" (58.5mm)wide, 12mm hex Steering: Bell crank type Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet, Tires, Wheels, 18T Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo Battery: 7.2V NiMH battery with Standard connector Charger: To match selected battery AA Cells: For transmitter Building and Track Equipment SPECIFICATIONS Length: 13.8" (350mm) Width: 10.6" (270mm) Height: 8.3" (210mm) Wheelbase: 6.8" (174mm) Tread: 7.6" (194mm) distance between center of tires measured side-to-side

2.495,-

2.795,-

KJØP

-11%

Tamiya 47349 XV-01 Chassis Kit Long Damper Spec

Art.nr: 47349

Copied

The Dominating Drive You've Been Longing For The versatile XV-01 chassis offers exciting R/C driving action both on- and off-road. It features a front-motor, belt-driven 4WD layout with extensive covered areas. This kit transforms the XV-01 into a long damper spec, using CVA Mini oil dampers fitted with TRF501X setting springs for an even more dominating drive. 3.5mm thickness FRP damper stays have been designed to get the most of the dampers, and provide 6 rear attachment positions to diversify your setup options. The kit also includes white 16-spoke wheels and rally block tires. Rally-Ready XV-01 Chassis The XV-01 chassis features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard, ensuring unhindered off-road performance. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Long steering linkage provides stable wheel alignment. Front and rear gear differential units enable customization with different viscosities of differential oils. Conveniently, the battery can be removed from the underside of the model. Specifications ●Length: 384mm, Width: 185mm ●Wheelbase: 257mm ●Monocoque Chassis Frame ●Belt-Driven 4WD ●F/R Gear Differential Units ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●CVA Mini Shock Units II ●Gear Ratio＝8.04:1 (When used with kit-standard 68T spur and 22T pinion gears) ●Full Ball Bearings ●Type 540 Motor ●Requires an electronic speed controller (sold separately) Separately Required Items ●2-channel R/C system with ESC　 ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger ●Body Parts Set

Tamiya 47350 1/10 Top Force 2017 4WD Buggy Kit

Art.nr: 47350

Copied

The purebred racer, redefined! The 1/10, electric Top Force 2017 4WD Kit reimagines the classic buggy that's been popular since 1991, adding square spike tires for superior traction! Other highlights include a Fiberglass-Reinforced Plastic (FRP) double-deck chassis, a powerful 540 motor with rear transverse mount, a polystyrene resin body, driver figure and white nylon wheels. Fiberglass Reinforced Plastic (FRP) double-deck chassis. Four-wheel shaft drive. 540-size motor with rear transverse mount. Polystyrene resin body with rear wing, marking decals and driver figure. Plastic oil CVA shocks. Fiberglass Reinforced Plastic shock damper stays. Fully independent double wishbone suspension. Bellcrank steering. Front/rear ball differentials with a rigid propeller shaft. Square spike tires with rubber construction. White nylon wheels. Adjustable toe-in/camber. Shielded ball bearings. This is the 1/10 scale, Electric Powered, Radio Controlled, Top Force 2017 Offroad Buggy Kit from Tamiya. FEATURES Chassis: 0.078" (2mm) thick fiberglass Drive: Four wheel shaft drive Differentials: Ball type Motor: 540 size brush equipped, rear transverse mount Ball Bearings: Shielded for long life Shocks: Plastic body oil filled CVA type Gearboxes: Sealed Differential: Gear type Body: Molded from clear polycarbonate Tires: Square spike rubber construction Wheels: One-piece nylon construction, white in color 2.2" (56mm) diameter, front 0.93" (23.7mm) wide, rear 1.1" (29mm) wide 12mm hex Suspension: Fully independent double wishbone Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable front only, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Steering: Ball bearing equipped bell crank type INCLUDES Top Force rolling chassis with oil-filled shocks, 540 motor, clear polycarbonate body, decals, wheels, tires, 21 tooth pinion gear spur gear and instructions _ REQUIREMENTS Radio: 2-channel with high-torque steering servo Radio Batteries: AA size ESC: Compatible with included 540 brushed motor Battery: 6-cell flat w/standard connector Charger: AC/DC timed or peak for 6-cell battery Building and track equipment SPECIFICATIONS Vehicle; Length: 15.7" (400mm) Width: 9.8" (249mm) Height: 7.4" (187mm) Weight: 2.7lbs (1240g) approximately Tires: Front, width 1.2" (31.5mm), diameter 3.1" (80mm) Rear, width 1.6" (40mm) diameter 3.1" (80mm) Body; Length: 11.3" (287mm) Width: 6.2" (158mm) at widest point Height: 3.1" (79mm)

2.795,-

2.995,-

KJØP

-7%

Tamiya 47355 Dual Ridge Mettalick Black (TT-02B)

Art.nr: 47355

Copied

Dual Ridge er en spennende Tamiya R / C buggy, og denne 4WD modellen trives både på og utenfor veien! Karosseriet kombineret med den aerodynamiske wingen en aerodynamisk form. En spennende finish står det ferdig lakkerte sorte karosseriet for, samt decalene i spreke farger, som følger med i settet for. Karosseriet er designet av pdc_designworks i Japan Designer Takayuki Yamazaki av pdc_designworks kom opp med designen for denne modellens karosseri. En tidligere ansatt i den verdensberømte Honda-organisasjonen, brukte han sin tyngde av erfaring for å skape den flytende futuristiske silhouetten. Akseldrift 4WD Det akseldrevne 4WD TT-02B buggy chassiset bruker en skidformet ramme. Hjuloppsettet benytter firehjuls uavhengig dobbelthjulsoppheng med lange armer, samt hvite CVA-støtdemper, noe som gir bilen gode kjøre egenskaper, mens Venstre / Høyre bærearmer er identiske for å muliggjøre problemfri montering og bygging. Front / bak girkass inkluderer 4-skrå drev for jevn drift, og er forseglet for å sikre at støv ikke kan komme inn. Toppen kan fjernes ved å løsne noen skruer, noe som gjør vedlikeholdet enkelt. 4 forskjellige utvekslinger kan benyttes ved bruk av 3 separate solgte typer tannhjul / pinjonger, slik at du kan matche egenskapene til biloppsettet og underlaget til enhver tid. Selvfølgelig inkluderer dette off-road-settet også en mottaker boks og motordeksel for å beskytte dem mot smuss og rusk som er kastet opp fra banen. ● Lengde: 380mm, Bredde: 250mm, Høyde: 145mm ● Hjulbase: 266mm ● Hjulbredde: 217mm (Front), 208mm (Bak) ● Ramme av badekarstype ● Akseldrevet 4WD ● Front / Bak 4-drevs diff ● 3- Styrekontrollstang ● 4-hjuls oppheng • Dekkbredde / diameter: 32 / 82mm (Front), 41 / 82mm (bak) (Square Spike Dekk) ● CVA Støtdemper ● Gear Ratio = 10.71: 1 (med sett Inkludert ) ● Type 540 Motor

Tamiya 47370 1/10 Isuzu mu Type X CC-01 4WD Kit

Art.nr: 47370

Copied

True Isuzu realism. The 1/10, electric Isuzu Mu Type X 4WD Kit is a blast to drive, on- or off-road! Features include a tough, all-terrain chassis, a powerful 540 motor, an ESC, an injection-molded plastic body, bellcrank steering and much, much more: CC-01 plastic tub chassis. Four-wheel shaft drive. 540 brushed motor. ESC. Injection-molded plastic body. Oil-filled CVAs. Double wishbone suspension with front upper single links and lower H-shaped arms, plus a rigid rear suspension. Bellcrank steering with servo saver and adjustable linkage. Single-speed transmission. Front/rear sealed gearboxes. Planetary gear differentials. Rear diff may be locked during assembly. Fixed, non-adjustable camber tie rods. Adjustable toe-in/caster. Black plastic front bumper. 1.1" (29 mm) wide, 3.5" (90 mm) diameter semi-pneumatic all-terrain rubber tires. Plastic six-spoke wheels. This is the 1/10 scale electric powered, radio controlled, 4WD Isuzu Mu Type X Off-Road Kit from Tamiya. FEATURES Chassis: CC-01, plastic tub construction Drive: Four wheel, shaft driven Differentials: Planetary gear, rear differential may be locked during assembly Motor: Brush equipped 540 electric motor Shocks: Oil-filled, CVA Gearbox: Front and rear sealed gearbox Differentials: Planetary gear, rear differential may be locked during assembly Transmission: Single speed Body: Injection molded plastic Tires: Semi-pneumatic all-terrain, rubber construction 1.1" (29mm) wide, 3.5" (90mm) diameter Wheels: Plastic, six spoke design Front Bumper: Plastic construction, black in color Suspension: Double-wishbone front upper single links and lower H-shaped arms, rigid rear suspension Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver and adjustable linkage INCLUDES Tamiya Isuzu Mu Type X kit with oil-filled shocks, 540 motor, ESC, injection molded body, tires, wheels, shock oil, 16 tooth pinion gear, spur gear, instructions REQUIREMENTS Radio: 2-Channel with high-torque steering servo AA Batteries: For transmitter Battery: 6-cell stick pack w/ standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment SPECIFICATIONS VEHICLE -Length: 16.8" (426mm) Width: 7.7" (195mm) Height: 8.5" (215mm) Weight: 53.3oz (1510g) Wheelbase: 9.9" (252mm)

2.895,-

3.195,-

KJØP

-9%

Tamiya 47372 1/10 Subaru Impreza Petter Solberg Mexico ...

Art.nr: 47372

Copied

Subaru Impreza som Petter Solberg kjørt i Mexico 2004. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker 7.2V Ni-Mh batteripakke og lader Styreservo Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 44,5 cm Chassis type: TT-01 Type-E Skala: 1/10 Lengde: 44,1cm Bredde: 18,5 cm Høyde: 13,7 cm Terreng: On-road Drift: 4WD Fartsregulator ESC (inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: RS-540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Informasjon fra Tamiya: A Classic Returns! Subaru were once again a force to be reckoned with on the 2004 rally circuit, their Impreza taking 5 wins in the capable hands of Petter Solberg. This assembly kit creates an R/C model of the Impreza which took part in the third race, in Mexico. A durable polycarbonate body recreates the distinctive form of the car, with separate molded parts for the side mirrors and rear wing. Stickers are included in the kit to depict the numerous markings on the car. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color dish wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Specifications ★Length:441mm, Width: 185mm, Height: 137mm ★Wheelbase: 257mm ★Tire Width/Diameter: 27/67mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor Separately Required Items ★2-channel R/C system ★Battery pack and charger ★Batteries for transmitter

1.995,-

2.195,-

KJØP

-9%

Tamiya 47372 Subaru Impreza Petter Solberg Mexico 2004 ...

Art.nr: 47372 uten esc

Copied

Subaru Impreza som Petter Solberg kjørt i Mexico 2004. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker og esc 7.2V Ni-Mh batteripakke og lader Styreservo Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 44,5 cm Chassis type: TT-01 Type-E Skala: 1/10 Lengde: 44,1cm Bredde: 18,5 cm Høyde: 13,7 cm Terreng: On-road Drift: 4WD Fartsregulator ESC (ikke inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: RS-540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Informasjon fra Tamiya: A Classic Returns! Subaru were once again a force to be reckoned with on the 2004 rally circuit, their Impreza taking 5 wins in the capable hands of Petter Solberg. This assembly kit creates an R/C model of the Impreza which took part in the third race, in Mexico. A durable polycarbonate body recreates the distinctive form of the car, with separate molded parts for the side mirrors and rear wing. Stickers are included in the kit to depict the numerous markings on the car. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color dish wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Specifications ★Length:441mm, Width: 185mm, Height: 137mm ★Wheelbase: 257mm ★Tire Width/Diameter: 27/67mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor Separately Required Items ★2-channel R/C system ★Battery pack and charger ★Batteries for transmitter

1.695,-

2.095,-

KJØP

-19%

Tamiya 47376 1/18 King Yellow 6x6 Painted

Art.nr: 47376

Copied

Ready to pound dirt! The King Yellow is a 6x6 six-wheeled School Bus themed R/C vehicle ready to pound dirt, asphalt lots and neighborhood streets across the country! The model utilizes a gear-driven 6WD chassis which is partially derived from the capable Tamiya GF-01 wheelie machine. The exceptional drive it provides make for extreme fun while off-road driving. Furthermore, its powerful gear-driven setup allows the King Yellow to take on slope inclines of up to 40 degrees!This LIMITED-EDITION version of the kit includes a pre-painted yellow polycarbonate body! The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable. 1/18 scale R/C model assembly kit. Length: 478mm. Body is pre-painted in PS-19 Camel yellow, and requires attachment of accessories, application of stickers, and opening of body holes. The G6-01 chassis gives powerful 6-wheel drive in a gear powered drivetrain contained in a gearbox in the tough, slimline monocoque. 3 differential gears are built-in. 6-wheel double wishbone suspension is fitted with friction dampers. Matte plated deep rim wheels are paired with 113mm tires. 540-Brushed Type Motor included. With suspension re-assembly and a separately-sold transmitter with 4WS function and R/C equipment, rear wheels can be made steerable (4-wheel steering). This is the Tamiya 1/18 scale Radio Controlled, Electric Powered King Yellow 6x6 Off-Road School Bus Kit. FEATURES Chassis: G6-01 plastic monocoque Drive: Six wheel gear driven, sealed gearbox, front, center and rear diff gears for smooth cornering Motor: 540 brush equipped, front-center mounted Body: Molded polycarbonate, pre-painted in Tamiya PS-19 Camel Yellow Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Steering: Two-piece steering tie rod, steering servo mounted on left of chassis, rear wheels can be made steerable with reassembly of suspension and separately sold 4WS function transmitter (not included) Wheels: Matte silver finish plastic, 2.1" (53mm) wide, 1.9" (48.9mm) diameter Tires: Rubber off-road V-shaped tread 2.6" (67mm) wide, 4.4" (113mm) diameter Front Bumper: Spring loaded INCLUDES 1/18 scale King Yellow 6x6 School Bus Kit, Clear Body, 540 size Motor Decals, Tires, Wheels, 18T Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment SPECIFICATIONS Vehicle; Length: 18.8" (478mm) Width: 10.6" (270mm) Height: 9.4" (239mm) Wheelbase: 6.8 + 4.9" (173 + 126mm) Body; Length: 17.7" (450mm) Width: 5.6" (142mm) Height: 5.3" (135mm)

2.995,-

3.395,-

KJØP

-12%

Tamiya 47381 SUPER ASTUTE (2018)

Art.nr: 47381

Copied

This is a Limited-Edition Re-Release of the Super Astute 2WD off-road buggy. The original radio control kit was released back in 1991. The basic construction and design of the model remains true to the original, with various minor upgrades. Super fun off-road driving awaits with this high-performance 2WD buggy’s rugged chassis, durable suspension and TTC (Tamiya Traction Control system). • 1/10 scale 2WD R/C model assembly kit. • 2.5mm thickness FRP chassis gives a low center of gravity for excellent balance. • The battery pack position has been slightly enlarged. Note: This kit is not compatible with square-shaped battery packs. Rounded profile battery packs must be used. • 4-wheel double wishbone suspension employs CVA oil dampers. • Sealed gearbox features TTC, which was Tamiya’s first slipper clutch and protects gears from impacts and gives stable drive by limiting wheelspin. Externally the same as on the original, it features a modernized internal design, and can be adjusted simply by removing the gearbox cover and turning the lock nut. • Efficient 0.5 module gear included. • A low-profile servo is required for this model. • High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. • Comes with durable and lightweight polycarbonate body and rear wing, plus a protective under cowl. • Requires: 2-Channel Radio, low profile servo, motor, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint.

4.195,-

4.395,-

KJØP

-5%

Tamiya 47383 Isuzu MU Type X BM (CC-01)

Art.nr: 47383

Copied

Tamiya RC ISUZU MU TYPE X Cc01 Black Metallic This is a special edition of our classic R/C model assembly kit of Isuzu’s mu SUV, a car first announced by the Japanese manufacturer in 1989 and then powered up in December 1994 with the release of the Type X, which featured a punchy 3.1-liter diesel turbo engine. The 2-door hatchback body is recreated by a ABS molded body with superb detail across the board, and – along with bumpers, side steps and side mirrors – given an ultra-cool black-plated finish. LEDs are included for use in headlights, while other black-plated parts are included for wheels, underguard and rear axle housing. The All-Terrain CC-01 Chassis The CC-01’s highly reliable and efficient full-time 4WD system features a longitudinally-positioned motor, which transmits power to the front wheels via the gearbox and to the rear wheels via propeller shaft with universal joints. Front and rear differentials enable smooth cornering, and for even greater off-road performance on rough terrain, the rear differential may be locked during assembly. The chassis suspension employs double-wishbone front upper single links and lower H-shaped arms plus rear rigid suspension. With 4 CVA oil dampers in total fitted to the front and rear, there’s enough cushion to take on even the roughest surfaces. Specifications: Length: 462mm Width: 195mm Height: 182mm Wheelbase: 242mm Tread (Front & Rear): 154mm Tire Width/Diameter (Front & Rear): 33/90mm Ladder Frame Bathtub Type Chassis Shaft-Driven Full-Time 4WD Front and Rear 3-Bevel Differential Gears Front Suspension: Double Wishbone Rear Suspension: 4-Link Rigid Front and Rear CVA Oil Dampers Gear Ratio = 14.67:1 Requires an Electronic Speed Controller (sold separately) Type 540 Motor included Required: 2-Channel R/C System R6/AA/UM3 batteries for transmitter Battery Pack & Charger Specifications: Adjustable Gear Ratio Yes Bearings Plastic Bushings Body Material ABS Plastic Body Stickers Included & Need to be Applied Chassis Material ABS Plastic Chassis Type CC-01 Construction Type Assembly Kit Differential Type Gear-Type Discontinued True Drive Type 4WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Motor 540-brushed type Requires A Requires: 2-channel radio, steering servo, 7.2volt battery pack with compatible charger to complete. Scale 1/10 Shock Damper CVA Oil-filled Damper Suspension Front Double Wishbone, Rear 4-link Rigid Suspension Terrain Use Multi-Terrain

3.595,-

3.995,-

KJØP

-10%

Tamiya 47390 - 1/10 RC Avante (2011) Black Special

Art.nr: 47390

Copied

TAMIYA RC AVANTE 2011 BLACK SPECIAL This is a Limited-Edition Black Special release of the Avante 2011 edition, which was originally released to commemorate the 35th anniversary of Tamiya R/C car products. It sports a color scheme inspired by its Mini 4WD cousin the Avante Black Special. About the Avante: The machine features a unique shaft-driven 4WD system which was taken from Tamiya’s first 4WD R/C buggy, the Hotshot. It features a highly sophisticated design including an FRP double-deck chassis layout, longitudinal motor & battery positions, and a formula-type body with chassis fairing. It is equipped with innovative components such as a compact gearbox with 3 small planetary gears, a center diff to increase stability, a fully adjustable suspension, and cam-lock wheel caps. The modern specification of the car has a few updates, such as universal drive-shafts and machined aluminum uprights, which gives this version increased durability and performance over the original. • 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm. • Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength. • Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion. • Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction. • 4-wheel double wishbone suspension has metal shafts for great customizability. • Aluminum front uprights. • Spike tires are mounted on fluorescent pink wheels. • Comes with a 25-Turn motor featuring a special label. Requires: 2-Channel Radio servo ESC (electronic speed control) 7.2volt battery pack & charger Tamiya PS paint. Specs: Adjustable Gear Ratio Yes Bearings Includes full ball bearings Body Material Polycarbonate Body Stickers Included Chassis Material Carbon fiber plate Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Motor Brushed 540 Type Required To Complete Requires: 2-Channel Radio, servo, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint. Scale 1/10 Shock Damper Oil-filled damper Suspension 4-wheel fully independent double wishbone Terrain Use Off-Road

5.995,-

6.595,-

KJØP

-9%

Tamiya 47394 Toyota Mountain Rider

Art.nr: 47394

Copied

RC TOYOTA MOUNTAIN RIDER DESCRIPTION This rip-roaring R/C model assembly kit recreates the Toyota Hilux, a pick-up truck which has enjoyed enduring popularity in the U.S., Japan and beyond. The model employs a ladder frame like that on the actual car, and is powered by a 3-speed transmission that offers 4WD (1st gear) and 2WD (2nd and 3rd gears) and allows gear changing while running. The realism doesn't stop there, with the sturdy suspension featuring metal axle housings, leaf springs and shackles, while the rear setup is fitted with a radius rod. A metal front under guard helps the model take on tough off-road conditions. The detailed and durable injection-molded body with roll bar is married to metal-plated wheels on 123mm diameter tires to give the model a stylish, high-lift appearance. About the Toyota Truck The Toyota Hilux has enjoyed sustained popularity in Japan and across the world since the first model's debut in 1968. The 3rd generation 30/40 Series appeared in 1978, with the RN36 model developed for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located toward the rear to provide a sufficient approach angle for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance, the look complemented by the chunky front grille and dual rounded headlights. The RN36 was mainly exported to North America, but was also later sold in Japan and there are still many fans of this pick-up to this day. • 1/10 scale R/C model assembly kit. Length: 525mm, width: 278mm, height: 275mm. Tread: 200mm (front)/218mm (rear). Wheelbase: 287mm. • Features a realistic injection molded body with roll bar. • The chassis is based around a ladder frame like that of the actual car, and is powered by a 3-speed transmission with 4WD (1st gear) and 2WD (2nd and 3rd gears), employing a universal drive shaft. • Sturdy suspension features metal axle housings, leaf springs and shackles, while the rear setup is fitted with a radius rod. • Differentials in die cast axle housings front and rear make for smooth turns. • Front & rear large diameter tires are paired with stylish plated wheels. • Includes 540-brushed type motor. • Separately available LEDs can be installed in the light cases to depict realistic head and tail lights. • Requires: 4-channel Tamiya Attack radio, steering servo, ESC, 7.2volt battery pack with compatible charger, and Tamiya TS and acrylic paints to complete.

KONTAKT

Tamiya 47413 Subaru Brat Blue Version

Art.nr: 47413

Copied

Blue Version The Subaru Brat was made solely for export, and achieved tremendous popularity in the U.S. market in the 1970s. Tamiya first produced an R/C version of this popular little truck back in 1983, and then an updated, improved re-release in 2007. Now the Brat appears as a special Blue Version of the latter, with the detail-packed body parts molded in blue plastic. This assembly kit also comes with a driver figure for a nostalgic feel, plus a lightweight and durable polycarbonate body. 2WD Chassis Packed with Unique Features The unique space frame chassis is specially molded in dark gray. It features a 4-wheel independent suspension setup with front double wishbones and rear trailing arms. The rear suspension in particular was updated in 2007 with diaphragm type oil dampers and coil springs. A Type 540 motor drives the differential-equipped gearbox, and covered drive shafts feature dog bone joints for optimum transmission efficiency. Block pattern tires mounted on realistic black 8-spoke wheels round out this stylish package. ★Molded in stunning blue styrene, the body offers plenty of realistic detail that is sure to please! ★A closer look at the rear-wheel drive space frame with chassis that is the base for this model. ★The front double wishbone setup uses radial arms and inboard springs for super performance. ★The rear features the motor, plus a sealed gearbox and booted shafts for minimal intrusion of dust and dirt. ★In addition to the blue styrene body, a lightweight and durable polycarbonate version is also included! Specifications ★Length: 453mm, Width: 220mm, Height: 175mm ★Tread: 197mm (Front), 178mm (Rear) ★Tire Width/Diameter: 35/82mm (Front & Rear) ★Space Frame ★Rear-Wheel Drive ★3-Bevel Differential ★2-Piece Steering Tie-Rod ★Suspension: Front Double Wishbone (inboard springs), Rear Trailing Arm (oil dampers) ★Gear Ratio = 6.7:1, 7.3:1 or 8.5:1 ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately. Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Tamiya 47414 Audi A4 Quattro Touring TT-01E inkl ESC

Art.nr: 47414

Copied

Klassisk Audi A4 Quattro Touring racerbil fra 1997. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker 7.2V Ni-Mh batteripakke og lader Styreservo Hurtiglim Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 45,4 cm Chassis type: TT-01E Skala: 1/10 Terreng: On-road Drift: 4WD Fartsregulator TBLE-02S ESC (inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: Type 540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Lakk/maling anbefalt av Tamiya: PS-5 Black PS-12 Silver PS-31 Smoke TS-17 Gloss Aluminum TS-47 Chrome Yellow X-18 Semi Gloss Black Informasjon fra Tamiya: This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice. Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine. TT-01 E Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns. • 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm. • Polycarbonate body. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. • Requires: 2-channel radio, servo, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint

1.795,-

1.995,-

KJØP

-10%

Tamiya 47414 Audi A4 Quattro Touring TT-01E uten ESC

Art.nr: 47414

Copied

Tamiya Audi A4 Quattro Touring TT-01E Length: 454mm. Image shows painted and assembled kit. This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice. Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine. ★This R/C model assembly kit depicts a racing Audi A4. ★The sporty form is rendered beautifully in polycarbonate, with stickers included to recreate markings. ★The model is based upon the proven TT-01 Type-E shaft-driven 4WD chassis. ★Silver multi-spoke wheels are paired with slick tires.

1.395,-

1.995,-

KJØP

-30%

Tamiya 47419 Monster Beetle 2015 Black Edition Kit

Art.nr: 47419

Copied

Tamiya 47419 Monster Beetle Black Edition. The Monster Beetle is back…in black! This is a cool Black Edition of the Tamiya classic. It features dedicated body and chassis colors that endow a true Tamiya classic with a brand-new look. • 1/10 scale 2WD R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm, wheelbase: 247mm. • Black molded polystyrene resin body. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end, plus metal-plated parts for headlights and handles, etc. • Classic stickers have a brand-new color scheme. • ABS space frame is molded in a dark gray. • Superlative cushioning and grip are provided by 130mm diameter, 58mm width lug pattern pin-spike tires on gold color plated wheels, cushioned by high-performance CVA oil dampers on front double wishbone and rear trailing arm suspension setups. • Efficient and durable universal shafts come with rubber boots. • Includes 540-type motor. Requires: 2-Channel Radio servo 7.2-7.4volt battery pack & compatible charger. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint. Scale 1/10 Shock Damper Oil-filled damper Suspension Fully Independent Terrain Use Multi-Purpose

Tamiya 47420 1/10 RC Volkswagen Type 2 T1 Red/Wht Ptd ...

Art.nr: 47420

Copied

Tamiya 1/10 M06 Volkswagen Type 2 T1 Red White Pre-Painted Body Onroad EP Car Kit w/ ESC Motor This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic R/C body replica is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1. Compared to the Full-Kit version (item 58668), this kit comes with a pre-painted body to make the body assembly process less intimidating to new kit building enthusiasts. M-06 Chassis The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. • 1/10 scale R/C model assembly kit. • Pre-painted Polycarbonate body. Comes pre-cut out with holes pre-drilled for attachment of the separately molded plastic parts for bumper, light cases and side mirrors (these require painting). • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C components positioned on either side for optimum balance and a low center of gravity. • 239mm wheelbase M-06L chassis. • Metal-plated dish type wheels. • Over a dozen Hop-Up Option parts are available to customize the chassis to your driving needs. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Requires: 2-channel radio, steering servo, and 7.2-volt battery pack with compatible charger

2.595,-

2.795,-

KJØP

-7%

Tamiya 47429 1/10 Porsche 911 GT3 Cup 2008 TT-01E 4WD ...

Art.nr: 47429

Copied

Tamiya 47429 1/10 Porsche 911 GT3 Cup 2008 TT-01E 4WD Leveres med torque tuned motor. Byggesett av Porsche 911 GT3 Cup 2008 , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Esc(fartsregulator) Radio/Motaker Batteri og Lader 7.2V Nimh eller 7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Se anbefalt tilbehør under relaterte produkter. Tamiya 1/10 RC Porsche 911 GT3 Cup Car 2008 (TT-01 Chassis TYPE-E) Machine for the highest peak one-make race A 911 GT3 cup car developed for the highest peak "Porsche Supercup" of one-make races held in 10 countries around the world and delivered to private teams. Above all, it is an assembly kit of an electric radio control car that reproduces the VIP car that Porsche manages the machine and the invited player drives for each race. The body and large rear wing, which are modeled with a powerful form, are made of polycarbonate. The door mirror is a separate resin part. In addition, the front and rear light cases are plated resin parts to which LED lights (sold separately) can be attached. The high scale feeling is attractive. In addition, gold and white pinstripes and Porsche logos that tighten the flat white body are prepared with stickers. Shaft drive 4WD TT-01 TYPE-E chassis adopted, which is fun to improve performance The chassis is a vertical motor shaft drive 4WD TT-01 TYPE-E that is easy to assemble and easy to maintain. For the bathtub type main frame, Equipped with a glass fiber reinforced nylon resin upper deck and gear cover to give high chassis rigidity. The steering system is a 3-split type with little play and smooth movement. Low center of gravity, well-balanced body configuration and double wishbone 4 Combined with the wheel independent suspension and the differential gears installed on the front and rear, it demonstrates controllable maneuvering characteristics. In addition, the rear has a wide tread specification using a long wheel axle. In addition, the mesh-designed wheels that complement your feet are fitted with leshy slick tires. I am looking forward to improving the performance by incorporating a wide variety of optional parts (sold separately) for the TT-01 TYPE-E. Basic specifications Overall length 465mm, overall width 195mm, overall height 134mm Wheel base 251mm (short wheel base specification) Tread = front 157mm, rear 165mm (rear wide tread specification) Tire width / diameter = front and rear 27 / 67mm ● Frame = bathtub type Drive system = vertical motor / shaft drive full-time 4WD Diff gear = 3 bevels for both front and rear Steering = 3-split tie rod type Suspension = 4-wheel double wishbone Damper = friction for both front and rear Gear ratio = 8.35: 1 Motor = 540 type Speed controller = ESC (sold separately) A polycarbonate body that fully reproduces the glamorous form. The resin door mirror tightens the form. Slick tires are attached to the mesh design wheels. Tire marks are also available. Rear end that reproduces the shape of the duck tail. The large rear wing is made of polycarbonate. The upright is a dedicated part for the TT-01 TYPE-E, which has high strength and little backlash. Separately Required Items 2-Channel R/C System w/ESC R6/AA/UM3 batteries for transmitter Battery Pack & Charger

1.695,-

1.895,-

KJØP

-11%

Tamiya 47430 1/10 1995 Ford Mustang SVT Cobra R TT-01 ...

Art.nr: 47430

Copied

This Tamiya R/C kit pairs a classic body and the proven TT-01 Type-E chassis. The body depicts the Ford Mustang SVT Cobra R, which was a special version of the Mustang that was produced by FordÕs Special Vehicle Team (SVT for short). TT-01 E Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns. 1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm Polycarbonate body with separate molded parts recreating the side mirrors and rear wing. Stickers for trim body details. Paint window masking stickers included. 5-spoke wheels are paired with treaded tires. 257mm wheelbase. A wide range of Hop-Up Option parts is available to tune the TT-01 Type-E chassis. Includes 540 motor. Includes: Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit. Required Items: 2-Channerl radio, steering servo, 7.2volt battery pack with compatible charger, and Tamiya PS paint.

1.895,-

2.195,-

KJØP

-14%

Tamiya 47431 Eunose Roadster (M-06)

Art.nr: 47431

Copied

The Start of Something Beautiful Mazda’s Roadster – known as the MX-5 in other countries around the world – is a true hit design, with massive popularity across the globe. Its story began in 1989 with the appearance of the Eunos Roadster (NA), which won fans by the bucketful thanks to its perky design and performance. This is an R/C model assembly kit depicting that first generation Eunos Roadster, with a realistic polycarbonate body, stickers for decoration, and even masking stickers for use in the paint job. CHASSIS M-06 SKALA 1:10 DRIFT 2WD LEVERES SOM KIT MERKE TAMIYA DRIVKRAFT ELEKTRO ★The compact form of the hardtop Roadster is captured in style by a lightweight, durable polycarbonate body. ★Side mirrors are separately molded components developed especially for our R/C Roadster models. ★Black 8-spoke wheels are paired with treaded tires for a realistic look. Inner sponges are also included. Great RR Performance from the M-06 The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses black 8-spoke wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. ★A three-piece steering tie rod ensures that the M-06 chassis has effective steering response. ★Friction dampers are an integral part of the double wishbone suspension, giving your car a ground-hugging drive. ★Three different wheelbase lengths are accessible by switching the position of rear section parts. ★Left: The rear-mounted motor, rear-wheel drive setup provides the model with excellent traction at the rear. ★Right: A close-up of the rear suspension. Separately sold pinion gears enable different gear ratios. Specifications ★Length: 390mm, Width: 176mm, Height: 121mm ★Wheelbase: 225mm ★Tread (F/R): 138mm ★Rear-Motor, Rear-Wheel Drive ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio = 5.8:1 ★Tire Width/Diameter (F/R): 25mm/60mm ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Biler

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler