Hopp til innhold
Hjem / Tilbud

Tilbud

Hovedbilde Vapex Li-Po Battery 3S 11,1V 1300mAh 30C XT60 ...
Vapex Li-Po Battery 3S 11,1V 1300mAh 30C XT60 ...
Art.nr: VPLP014FXT
Copied
    Suitable for: Airplanes & Boats etc Battery: LiPo 3S 11.1V 1300mAh 30C 15Wh Max Discharge: 39A Continuous / 78A Burst Charge: Max 3C/3.9A (fast) Connector: XT60 Wire: 13AWG Balance Connector: XH Length: 75 mm Width: 33.8 mm Height: 22 mm Weight: 105 g     ype of Battery: Li-Po Length: 74,5 mm Height: 23 mm Weight: 101 g Width: 34 mm Capacity: 1300 mAh Number of cells: 3 Voltage: 11,1 V C-Rating: 30 C Power connector: T-Connector Balancing connector: JST_XH Cable: 13 AWG

259,-

289,-

KJØP
-10%
Hovedbilde Radiolink RC4GS V3 RC Transmitter with 2x R6FG ... Hovedbilde Radiolink RC4GS V3 RC Transmitter with 2x R6FG ...
Radiolink RC4GS V3 RC Transmitter with 2x R6FG ...
Art.nr: RLRC4GS-1
Copied
RadioLink RC4GS V3 5-channel radio with 2 R6FG receivers The RadioLink RC4GS V3 is a 5-channel transmitter for RC cars, boats, life buoys, tracked vehicles and robot projects with stable control, long range, telemetry, cruise control, dual mix control and a gyro-integrated receiver; this version comes with two R6FG receivers with an integrated gyro, practical if you want to run several models or expand your RadioLink system right away. 5-channel transmitter for cars, boats, life buoys and tracked vehicles Comes with 2 R6FG receivers with an integrated gyro Up to 400 metres of range under optimal conditions FHSS spread spectrum with 67-channel pseudorandom frequency hopping Model memory for up to 30 models Cruise control function for crawlers, for example Support for real-time telemetry Support for model battery telemetry up to 14S with a compatible receiver Programmable timer and dual mix control DSC port for simulator function or TBS Crossfire USB upgrade via computer Stable control with up to 400 metres of range The RC4GS V3 uses FHSS spread spectrum with 67-channel pseudorandom frequency hopping for strong interference protection, and is specified for up to 400 metres of range under open conditions; the actual range varies with the model, installation, antenna placement and surroundings. 5 channels for many types of models The RC4GS V3 suits crawlers, tanks, tracked vehicles, bashers, short course trucks, drift cars, petrol-powered RC cars, mini RC cars, monster trucks, off-road cars, sailboats, trimarans, bait boats and remote-controlled life buoys; CH1 steers, CH2 controls throttle and CH3–CH5 are programmed to suit the model. Real-time telemetry for the model's battery voltage The RC4GS V3 supports telemetry for RSSI, receiver voltage (shown after binding) and model voltage (via cable to the ESC and battery); with the R8FGH and R16F the model battery is supported up to 14S, 58.8 V and with the R7FG or R8FG up to 8S, 33.6 V. Cruise control system for crawlers The cruise control system is especially useful when driving crawlers, for example downhill where it is hard to keep the throttle steady manually, and provides smoother driving in technical terrain. Model memory for up to 30 models The RC4GS V3 stores settings for up to 30 models, so you can easily switch between several cars, boats or projects without setting up the radio again. Subsidiary ID function The RC4GS V3 can assign any ID numbers to up to 10 bound receivers, useful for rescue, towing or when several models are controlled with the same transmitter – for example when one model boat tows another. Programmable D/R via switch A switch or button can activate D/R during driving so the steering throw is changed quickly without the LCD menu, practical for four-wheel steering or models that require quick adjustment of the steering response. Dual programmable mix control Two channels of choice can be set as mixed; for logging trucks, for example, front- and rear-wheel steering can be combined for a smaller turning radius and better manoeuvrability. DSC port for simulator or TBS Crossfire The DSC port can be used for the simulator function and supports VRC Pro, CarX and Assetto Corsa Competizione, and can also be connected to TBS Crossfire. R6FG receiver with integrated gyro The included R6FG receivers have an integrated gyro and support for high-voltage servos; the gyro helps the vehicle hold its direction and reduces drift at higher speeds, and the gyro sensitivity is adjusted via STD or CH3, by default via the VR switch. Ergonomic design for longer driving sessions The RC4GS V3 is designed for comfortable use during longer driving sessions, with the throttle control, grip thickness and switch placement providing a more natural and precise control feel. Textured design that contributes to a better grip during longer driving Grip and weight balance suited to comfortable use FPV display holder with 1/4 thread Clearly placed switches for easier use Can be upgraded via USB The RC4GS V3 is updated via computer with a USB cable and the software guides you through the process; the USB port is for upgrading only, not charging. Wide receiver compatibility The RC4GS V3 comes with two R6FG receivers and is also compatible with several other RadioLink receivers. R6FG, standard receiver R4FGM R6F R8FG R8EF R8FGH R12F R16F Suitable for many model types RC cars Crawlers Drift cars Monster trucks Short course trucks Tracked vehicles and tanks RC boats and bait boats Remote-controlled life buoys Robot projects Technical specifications for the RC4GS V3 transmitter Model: RadioLink RC4GS V3 Product type: 5-channel transmitter Size: 174.8 x 116.4 x 224.2 mm Battery compartment: 59 x 25 mm, JST connector Number of channels: 5 Frequency band: 2.4 GHz ISM band Spread spectrum mode: FHSS, 67-channel pseudorandom frequency hopping Channel resolution: 4096 with normal jitter of 0.25 µs Operating voltage: 4.8–15 V, 6 AA batteries or 2S–4S LiPo battery Modulation mode: GFSK Transmitter power: <20 dBm Suitable model types: Cars, boats and robots Model memory: 30 models Range: Up to 400 m under open, interference-free conditions LCD display: 128 x 64 resolution, LCD backlight Low-voltage alarm: Yes, below 7.2 V or customised for a 2S–4S battery per model Compatible receivers: R6FG, R16F, R12F, R8FGH, R8FG, R8EF, R7FG, R6F and R4FGM CRSF protocol: Supported via TBS Crossfire connected to the DSC port Compatible flight controller hardware: ArduPilot, Pixhawk, BetaFlight, Arduino and Raspberry Pi can be connected with an SBUS signal Operating temperature: -30 °C to 85 °C Technical specifications for the R6FG receiver Model: RadioLink R6FG Product type: 6-channel receiver with integrated gyro Size: 35 x 20 x 13 mm Antenna length: 205 mm Weight: 6 g Number of channels: 6 Operating voltage: 3 V DC Operating current: 30 mA Frequency band: 2.4 GHz ISM band, 2400–2483.5 MHz Spread spectrum: FHSS, 67-channel pseudorandom frequency hopping Channel resolution: 4096 with 0.25 µs per section Gyro mode: Integrated gyro with adjustable gyro sensitivity Suitable model types: Cars, boats and robots Range: Up to 400 m under open, interference-free conditions Compatible transmitters: RC8X, RC6GS V3, RC4GS V3, RC6GS V2, RC4GS V2, RC6GS, RC4GS, T16D, T12D, T8FB and T8S Good to know The maximum range is tested in open areas without interference and the actual range can vary with the model, installation, antenna placement, surroundings and signal conditions; telemetry for the model battery requires a compatible receiver and a correct connection, the USB port is for upgrading only, and always check that the receiver, model type, channel settings, gyro sensitivity and telemetry are configured correctly before use.

995,-

1.095,-

KJØP
-9%
Hovedbilde Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Art.nr: TRX 2972G
Copied
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
Art.nr: B9310
Copied
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair This is a heavy duty gold plated connector with built-in antispark resistors that are great for high powered electric models. The QS8-S connector gives you a constant charging of the capacitors on the ESC and allows the battery to be connected without sparks on your ESC when you first plug in. Features: HEAVY DUTY Built in Anti-Spark Function (5.1 ohm resistor) Not compatible with our EC8 connector Specs: Continuous Current: 110A Max Peak Current: 500A Max Wire Size: 6AWG (aprox 6-7mm dia of the exposed wire) Max outer dia of the wire insulation: 8.8mm Connectors: 8mm Gold Plated Brass Case Material: Fiber Reinforced Nylon Length (total assembled): 60.9mm Width: 29.7mm Height: 15.4mm Weight: 41.7g

159,-

219,-

KJØP
-27%
Hovedbilde DynoMAX B9238 Wire Red & Black 8AWG D4.3/6.5mm x 1m
DynoMAX B9238 Wire Red & Black 8AWG D4.3/6.5mm x 1m
Art.nr: B9238
Copied
D-MAX Wire Set Red & Black - 8AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m WG Wire: 8 Area Wire: 10mm2 Diameter Wire: 4.3mm Diameter Insulation: 6.5mm Wire: 1650 Strands of Copper @ 0.08 mm Insulation: Silicone Based

279,-

299,-

KJØP
-7%
Hovedbilde Traxxas 10211-RNR Body Maxx Slash Rock´n´Roll
Traxxas 10211-RNR Body Maxx Slash Rock´n´Roll
Art.nr: TRX 10211-RNR
Copied
Traxxas 10211-RNR - Maxx Slash Painted Body Set - Rock'N'Roll Body, Maxx Slash®, rock'n'roll (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting) Is it time to upgrade your Maxx Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled and ready to mount with pre-installed body mounts and body protectors. Replacement part for these models: Maxx® Slash®

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Traxxas 10211-BLUE Body Maxx Slash Blue
Traxxas 10211-BLUE Body Maxx Slash Blue
Art.nr: TRX 10211-BLUE
Copied
Traxxas 10211-BLUE - Maxx Slash Painted Body Set - BLUE Body, Maxx Slash®, blue (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting) Is it time to upgrade your Maxx Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled and ready to mount with pre-installed body mounts and body protectors. Replacement part for these models: Maxx® Slash®

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Traxxas 10211-RED Body Maxx Slash Red
Traxxas 10211-RED Body Maxx Slash Red
Art.nr: TRX 10211-RED
Copied
Traxxas 10211-RED - Maxx Slash Painted Body Set - RED Body, Maxx Slash®, red (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting) Is it time to upgrade your Maxx Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled and ready to mount with pre-installed body mounts and body protectors. Replacement part for these models: Maxx® Slash®

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Traxxas 10211-GRN Body Maxx Slash Green
Traxxas 10211-GRN Body Maxx Slash Green
Art.nr: TRX 10211-GRN
Copied
Traxxas 10211-GRN - Maxx Slash Painted Body Set - GREEN Body, Maxx Slash®, green (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting) Is it time to upgrade your Maxx Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled and ready to mount with pre-installed body mounts and body protectors. Replacement part for these models: Maxx® Slash®

1.395,-

1.595,-

KJØP
-13%
Viser 154 til 162 (av 5625 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png