Hopp til innhold

Yeah Racing TAMC-070 Graphite Front Damper Stay for Tamiya M08

Art.nr: TAMC-070

109,-

Yeah Racing

Yeah Racing

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Yeah Racing Graphite Front Damper Stay for Tamiya M08

Description:

Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.

 

 

Features:

  • For: Tamiya M08
  • Material: Graphite
  • Color: Black

 

Includes:

  • Graphite Front Damper Stay (1 pc)

Produsent

Kunder kjøpte også

Yeah Racing Steel Diamond Plate Accessory Type A 14cm X 20cm For Crawler Tractor Truck Featuring an embossed pattern, this Steel Diamond Plate accessory will give you the scale realism look commonly found on real cars! Made of aluminum sheet, so you can get that metallic look without the weight! Can be easily shapped by cutting with scissors means that you will be able to fit this into anywhere you please!   Features: For: Scale Bodies Color: Silver Material: Steel   Specifications: Width: 140mm Height: 200mm   Includes: Steel Diamond Plate Accessory Type A (1 pc)

179,-

199,-

KJØP
-10%
Denne veldig hendige sementen er til bruk sammen tamiya 54792 Body Reinforcing Mesh Tape. (solgt separat) Sammen vil de gjøre ditt karosseri en ekstra sterkt og motstands dyktig mot sprekker og ødeleggelse ved krasj. Innhold / informasjon • Leveres i en brukervennlig aluminiumstube. Nettovekt: 100 g • Tynn spiss er inkludert for enkel påføring • Bruk sammen med varenr 54792 nettingstape. • Bruk først tape og deretter sement. La det tørke noen timer. • Det er ok å bruke denne på malt underflater uten frykt for å skade malingsjobben. • Kan også brukes alene i områder hvor det er umulig å komme til med 54792, og også for å feste separate polykarbonat karosserideler. Som f. eks lyskasser etc

229,-

KJØP
This is the Tamiya Masking Tape/Plastic Sheeting.     FEATURES Plastic construction  Masks large areas such as R/C car bodies  Masking tape is preattached to plastic sheeting for sharply defined  edges  Peels off easily after painting   INCLUDES Roll of Tamiya Masking Tape/Plastic Sheeting   SPECIFICATIONS  Length: 32.8' (10m)  Width: 21.6" (550mm)

99,-

KJØP
Epoxy Putty (Quick Type)

79,-

KJØP
This is a 180ml Can of White Fine Surface Primer from Tamiya. FEATURES: Spray type primer specially developed for model finishing.           Use on metal and plastic.           The fine particle of the primer ensures a smooth finish after             application.           White color is ideal as a base coat for bright colors. INCLUDES: One 180ml Can of White Fine Surface Primer. SPECS:    180ml

139,-

KJØP
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
M-DRIVE Tool Pouch/Bag with Zipper This is a professional canvas tool pouch that is the perfect on-the-go storage for your M-Drive tools. Specs: Black canvas with yellow contrast Printed M-Drive logo Zipper Length: 260mm Width: 240mm Height: 35mm Tools not Inculded as shown below  

149,-

KJØP
M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head 3 & 4mm + Cross/Philips 3 & 4mm High quality screwdriver wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. They fit most flat-head and cross/philips headed screws used in RC cars and other radiocontrolled models. Specs: Flat Head Screwdrivers: 3 & 4mm Cross/Philips Screwdrivers: 3 & 4mm Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS

199,-

KJØP
M-DRIVE Hex/Allen Wrench Tool - 3mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 3mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M4 hex screws with allen head M5 hex screws with countersunk head M5 hex screws with button head

69,-

KJØP
M-DRIVE Hex/Allen Wrench Tool - 2.5mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 2.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head

69,-

KJØP
M-DRIVE Hex/Allen Wrench Tool - 2mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 2mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with countersunk head or button head

79,-

89,-

KJØP
-11%
Yeah Racing Graphite Rear Damper Stay for Tamiya M08 Description: Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.     Features: For: Tamiya M08 Material: Graphite Color: Black   Includes: Graphite Rear Damper Stay (1 pc)

129,-

139,-

KJØP
-7%
Yeah Racing QUTUS Challenger 50mm Damper Set for 1/10 RC Touring M-Chassis Car Black Description: Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much dampening you require. Choice from 1 to 5 holes open in the piston will allow you to tune the damper matching to your track conditions. For the 50mm variation of the QUTUS dampers, included are shock shafts which you can build 52mm (eye-to-eye) dampers when you require that tiny bit more extra length. If adjustable pistons aren't your thing, traditional "fixed" pistons are also included in both three and four hole variants. The shock body has been updated to be of "big-bore" spec. which fills more oil than traditional dampers which gives much more consistent handling in both cold and hot temperatures. Soft, Medium and Hard springs have been included as well.     Feature: For: 1/10 RC Touring M-Chassis Car Material: Aluminum Color: Black Include: QUTUS Dampers (4 pcs) Adjustable Pistons (8 pcs) Fixed Pistons (8 pcs) Hard Springs (4 pcs) Medium Springs (4 pcs) Soft Springs (4 pcs) Damper Oil (1 bottle) Manual:

649,-

KJØP
Features: Viscosity 750CPS / 57WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 700. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
This is the Futaba R203GF 2.4GHz S-FHSS 3-Channel High Voltage Surface Receiver. FEATURES S-FHSS/FHSS auto detection Normal and High-Speed Modes:Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any type of servos or peripherals. High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs INCLUDES Futaba R203GF 2.4GHz S-FHSS 3-ch Receiver with Instructions REQUIREMENTS Installing in model and linking to transmitter SPECIFICATIONS Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal *Battery fail safe voltage is set for 4-cell NiCd/NiMH battery.Battery F/S does not work properly when other type of battery is used Antenna Length: 7-1/2" COMMENTS Not compatible with Futaba FASST systems.

599,-

649,-

KJØP
-8%
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-32 Corsa Gray).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-21 Park Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-7 Orange).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-14 Copper).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Yeah Racing Aluminum Front Damper Stay for Tamiya M08 Black Description: Aluminum damper stay for Tamiya's M08, stronger than the original plastic part means your car will handle crashes better! Feature: For: Tamiya M08 Material: Aluminum Color: Black Include: Aluminum Damper Stay (1 pc) Screws (2 pcs) Ballstuds (2 pcs)

129,-

KJØP
  These are the replacement gears to the M-07 Concept gearbox. M-07 Concept Spur Gear (37T/21T) x1 M-07 Concept Counter Gear (29T/23T) x1 Contains enough gears to replace 1 complete gearbox. Compatible with M-07 Concept chassis cars.

49,-

KJØP
This is a Roll of 40mm Masking Tape from Tamiya. FEATURES This is a thin, self-adhesive paper tape, developed for model  applications.  Yellow in color.  Flexible.  Easily applied to curved surfaces making it ideal for masking off  areas for painting, etc. INCLUDES One Roll Of Masking Tape SPECIFICATIONS  Width: 40mm

65,-

KJØP
 This is a 10 Meter Roll of 10mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 10m           Width:  10mm

49,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png