Name: Vant 7.4V 5200mAh 35C Deans-XH
Brand: Modelsport AS
SKU: 5200352
Price: 459.00 NOK
Availability: OutOfStock

Traxxas 2065T Servo 2065T Micro Sealed

Traxxas 2065T Replacement part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender® TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

419,-

439,-

På lager 2

KJØP

-5%

Traxxas 2821 Li-Po Battery 2S 7,4v 750mAh 20C TRX-4M

Traxxas 750mAh 7.4V 2-Cell 20C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Replacement part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

259,-

279,-

På lager 5

KJØP

-7%

Traxxas 9721 Fuel Canisters, Jack Red Land Rover ...

Fuel Canisters, Jack Red Land Rover Defender TRX-4M Fuel canisters (left & right)/ jack (red) (fits #9712 body) Red replica fuel canisters for the TRX-4m™ Land Rover® Defender® body. (Fits 9712-series Defender body)

49,-

69,-

På lager 1

KJØP

-29%

WLToys 1652 7.4V 2200mAh Lipo Flat Deans

WLToys 7.4V 2200mAh LiIpo for flere ulike WLToys-biler. Blant annet Buggy 124019 Fierce og Truck 124018 Offroad. Flate celler og Deans batteriplugg. Spesifikasjoner Størrelse 101x34x15mm Vekt 112gram Balanseringskontakt XH Batteriplugg Deans

289,-

319,-

På lager 3

KJØP

-9%

WLtoys 124018 Truck Offroad Habile 1/12 4WD - Komplett

WLtoys Truck 124018 Habile er en tøff 1/12 bil med flere solide aluminiumsdeler. Bilen leveres med 4WD, et 2s 2200mah LiPo batteri og en kraftig børstet 550 motor som gjør at den er kvikk i forhold til størrelsen. WLToys 124018 deler samme plattform som WLToys Buggy 124019, men leveres her som en offroad truck. Denne har en toppfart på opp mot 50km/t og levereres helt komplett med unntak av 4stk AA-batterier til radio. 1/12 Bilen er 1/12-skala så den gir en god kombinasjon mellom størrelse og vekt. Drivaksler ut til hjulene er i metall og bilen har blant annet dempertårn og chassis i aluminium. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Batteri Bilen leveres med ett 2S 2200mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg. Spesifikasjoner Lengde 356mm Bredde 208mm Høyde 123mm Motor 550 Sender/Radio Inkludert 2.4GHz Batteri 2s 2200mAh Lipo m/Deans Kjøretid 7-10min Ladetid Ca. 2.5t Rekkevidde 100m+ Skala 1/12 Vekt 960g Eskens innhold 1x RC Truck 1x Radio 2.4GHz 1x Batteri 1x Lader 1x Manual 1x Small cross sleeve

1.595,-

1.695,-

På lager 1

KJØP

-6%

HPI 101939 Plazma 1.5V Alkaline AA Batteries (4)

Long life, high discharge rate suitable for RC use Alkaline standard batteries for use with radio transmitters or any device that requires AA batteries. Perfect for all HPI RTR kits! Also available are rechargeable AA batteries! #101938 HPI Plazma 1.2V 2700mAh Nimh AA Re-Chargeable Battery (4Pcs)

29,-

På lager 31

KJØP

Traxxas 5748 Marine Grease 30cc

This is the Traxxas Marine Grease, 30cc FEATURES Roll-up "toothpaste-style" tube INCLUDES One tube of marine grease compound SPECIFICATIONS Volume: 1 oz. (30cc)

89,-

99,-

På lager 12

KJØP

-10%

Radient 010001 DEANS PAIRS INCLUDING HEAT SHRINK ...

DEANS PAIRS INCLUDING HEAT SHRINK (5PCS)

69,-

På lager 1

KJØP

Vant 5000352 7,4V 5000mAh 35C Wire Lead Hard Case ...

Merke Vant Spenning 7.4V Form Hardcase Type LIPO Kontakt Deans/T-plugg Størrelse 140*48*26mm

459,-

499,-

** Ikke på lager

KJØP

-8%

SkyRC D260 Ultimate Duo Charger 240VAC/12VDC 14A ...

SkyRC Ultimate Duo 260W AC/DC - Balance Charger / Discharger / Power Supply SkyRC D260 is a dual-channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at a maximum of 14A per channel, D260 is a smart choice for RC hobbyists. Multi-purpose for Most Battery Chemistries The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid). Dual Output D260 allows you to charge two different battery packs simultaneously with 130W rated power per channel. The maximum charge current can be 14 amperes. Intuitive Operation The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. D260 inherits from other chargers by SkyRC; many users will find it very familiar and easy to get started. Even if D260 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. LiHV Mode Available The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V. Versatile with the Addition of AGM & Cold Modes AGM (Absorbent Glass Mat) battery is maintenance-free, provides excellent electrical reliability, and is lighter than the flooded lead-acid type. However, AGM batteries are far more different than normal lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Smart & Efficient Cooling System Temperature controlled high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device. DC Power Supply With just a few clicks, D260 can be turned into a power supply unit to power your hobby equipment. Two channels can be used individually to power two different hobby gadgets simultaneously. Universal Voltage Input With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around! Even in the field, with the built-in DC input between 11V-18V, racers power the charger with their DIY battery packs. PC Software for Data Analysis and Firmware Upgrade ChargeMaster can start/stop the charging process, and view real-time graphs of current, voltage, capacity, and monitor single-cell voltage. Included: D260 Charger 2x XT60 charging leads 1x AC lead English printed manual D260 Specifications: DC Input Voltage: 11-18V AC Input Voltage: 100-240V Display Type: 128x64 LCD Display Backlight: Cool White Case Material: Metal & Plastic Controls: Five Buttons Case Size: 160x150x71mm Weight: 896g DC Power Supply Output: 130W Per Channel PC Communications: USB Port for Firmware Upgrade External Port: 2-6S Balance Socket-XH, Micro USB Port for Firmware Upgrade, Battery Socket, AC/DC Input, DC Output & 5V-2.1A USB Output Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell Balance Current: 500mA/cell Reading Voltage Range: 0.1-26.1V Charge Current: (0.1A-14.0A) x2 Safety Timer: 1-720minutes / OFF Charge Wattage: 130Wx2 Discharge Current: (0.1A-2.0A) x2 Discharge Wattage: 10Wx2 Balance Cells: 2-6 cells Memory: 10x2 Different Charge/Discharge Profiles Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries / Delta-peak Sensitivity for NiMH/NiCd Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell Battery Types/Cells: LiPo/LiIon/LiFe/LiHV: 1-6 cells NiMH/NiCd: 1-15 cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000mAh LiPo/LiIon/LiFe/LiHV: 100-50000mAh Pb: 100-50000mAh Discharge Cut-off Voltage: NiMH/NiCd: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell Pb: 1.8-2.0V/cell Specifications: Weight: 896 g Input Voltage: 11-18VDC / 100-240VAC V Dimensions: 160x150x71 mm Charge Current: 2 x 0,1-14A Charges (Li-Fe): 1-6 Cells Charges (Li-Ion): 1-6 Cells Charges (Li-Po): 1-6 Cells Charges (NiMH): 1-15 Cells Charges (Pb): 2-20V Charging (Battery type): Li-Fe, Li-Ion, Li-Po, LiHV, Multi Charger, NiMH, Pb Discharge Current: 2 x 0,1-2,0A Output: 2 x 130W

1.799,-

1.899,-

** Ikke på lager

KJØP

-5%

Vant 7.4V 7200mAh 30C DEANS XH

7.4V 7200mAh 30C DEANS – XH 22x43x127

769,-

849,-

** Ikke på lager

KJØP

-9%

DynoMAX B9833 Connector Adapter XT60 (male) - Tamiya ...

DynoMAX Connector Adapter XT60 (male) - Tamiya (male) This is an practical connector adapter for batteries with an XT60 connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with a Tamiya connector but you have an vehicle with a XT60 connector system.

39,-

** Ikke på lager

KJØP

HPI 120096 RS4 SPORT 3 DRIFT DAI YOSHIHARA SUBARU BRZ

RS4 Sport 3 Drift Dai Yoshihara Subaru BRZ We're thrilled to welcome the return of Dai Yoshihara to HPI Racing, bringing with him his awesome Turn 14 Distribution Formula D machine! The 2011 series champion and multiple podium finisher has had his classic Nissan S13 replica in our drift car line-up for some time, and we're extremely proud to have the next car in his fleet, an amazing 1000 brake horsepower Subaru BRZ beast! RS4 SPORT 3: Ready to Drift or Race! The tuneable suspension of the RS4 SPORT 3 lets you tweak and tune to your heart's content, so you can be your own drift car mechanic, or you can just run with the standard settings - they're preset to be great on all driving surfaces! The RS4 SPORT 3 package is fully built, painted and detailed right out of the box, and ships with a realistic steering wheel style 2.4GHz radio system - all you have to do is plug in the included batteries for easy drift action! Replica Subaru BRZ Body The Subaru BRZ body features Dai's official Turn 14 race livery in its unique blue, black and silver finish - another amazing replica drift car to add to our ever-growing athlete line-up! The Subaru BRZ is a rare sight on the drifting scene, so right out of the box this beauty will be the center of attention! We're also introducing an awesome new wheel in our 1/10 line up, inspired by the actual R.M.K Design R5 Forged Wheels on Dai's car. Moulded from durable nylon, these lightweight wheels are tough enough for racing and stylish enough to stand out in any winning line up. Rounding out the package are official replicas of the actual tires that Dai runs: Falken Azenis RT615 T-Drift Tires in a special hard plastic tire with the fully licensed tread pattern from Falken. Dai Yoshihara has been a staple of the drift scene for almost 2 decades, winning countless trophies at events all over the USA. Whilst his skills behind the wheel are second to none, his appetite for fun and speed have won his place in fans hearts. Just check out his YouTube channel and you'll see what we mean! Be sure to subscribe to keep up with his vlogs and also give him a follow on Instagram! Features - Officially licensed Subaru BRZ featuring Dai Yoshihara's Formula Drift livery - RS4 SPORT 3 chassis design - Factory-assembled Ready-To-Run: just plug in and drive - Fully enclosed 4WD shaft drive - HPI Firebolt 15-turn motor installed - Encased pinion & spur gear - Sealed metal gear diffs capable of handling brushless power - HPI 2.4GHz radio system with steering wheel radio - Waterproof SC-3SWP2 speed controller - Battery box fits standard LiPo batteries & up to 7-cell NiMH - Battery position is adjustable for extra traction or increased steering - Thick hook-and-loop strap holds battery in place - Enclosed receiver case protects from the elements - Double-wishbone suspension design - Composite oil-filled threaded shock absorbers - Complete set of ball bearings - Option parts available include: carbon fiber shock towers, universal dogbones, aluminum shocks and more - Everything you need to get drifting is included in the box!

3.895,-

4.195,-

** Ikke på lager

KJØP

-7%

Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm

Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

På lager 9

KJØP

Dynomax 9840 Connector Adapter T-Plug (male) - XT60 ...

DynoMAX Connector Adapter T-Plug (male) - XT60 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an XT60 connector without soldering etc. It also works if you have an charge lead with an XT60 connector but you have an vehicle with a T-Plug connector system.

39,-

På lager 6

KJØP

Tamiya 86034 PS-34 Polycarb Spray Bright Red 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-34 Bright Red). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

På lager 5

KJØP

Yeah Racing RC Flanged Bearing 1/4x3/8x1/8 (inch) ...

Yeah Racing RC Flanged Bearing 1/4x3/8x1/8 (inch) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specifications: Yeah Racing (#YB5002FS/10) RC Flanged Bearing 1/4x3/8x1/8 (inch)/li> Material: Metal Includes: Bearing (10Pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

149,-

169,-

** Ikke på lager

KJØP

-12%

HPI 118010 - 1968 CHEVROLET CAMARO BODY (200MM)

REAR TRACK 210MM WHEELBASE 255MM The 1968 Chevrolet Camaro is legendary for its muscle car performance, going head-to-head on the street and race track with the fastest cars from the 60's. Camaro fans can now own a realistic 1/10th scale replica that fits perfectly on most 200mm touring cars. The lines and stance of the original Camaro are accurately sculpted, with the classic “coke bottle” rear fenders and realistic decals, this HPI Camaro body is as close as you can get to the real thing for R/C Touring Cars! Features Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more, plus official logos. Clear overspray film and pre-cut vinyl window masks make painting simple and quick. A decal instruction sheet is included for precise decal placement. Each HPI body has dimple marks for body post drilling locations. An optional, realistic rear spoiler is provided with the body This is an officially licensed replica! HPI Vintage wheels and tires (shown) are highly recommended for a realistic appearance, use 26mm Vintage wheels on the front and 31mm wheels on the rear of this body, with 26mm Vintage tires up front and 31mm in the rear. 190mm touring car owners can use our 6mm offset Vintage wheels and tires to adapt this 200mm body to fit their car. Vintage 5 Spoke Wheel: #3815 - 26mm Matte Chrome (0mm Offset) #3816 - 26mm Black (0mm Offset) #3817 - 26mm Shiney Chrome (0mm Offset) #3820 - 31mm Matte Chrome (6mm Offset) #3821 - 31mm Black (6mm Offset) #3822 - 31mm Shiney Chrome (6mm Offset) Vintage Racing Tyres: #4793 - 26mm #4797 - 31mm

459,-

På lager 1

KJØP

SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC

SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg. SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

På lager 4

KONTAKT

-7%

HPI 115967 Racing Savage XS Flux V Gittin Jr 4WD RTR ...

This is the Brushless Electric Powered, 2.4GHz Radio Controlled, RTR Vaughn Gitten Jr. Signature Edition Savage XS Flux Mini Monster Truck from HPI. FEATURES Chassis: Aluminum TVP (Twin Vertical Plate) with integrated rollhoop Drive: Four wheel Transmission: Metal gear Differentials: Four metal gears Brushless Motor: FLUX MMH 4000Kv with 4-pole high-torque rotor Electronic Speed Control: FLUX EMS-3S Battery Box: Fits standard LiPo batteries and 6-cell NiMH stickpacks Radio: HPI 2.4GHz TF-40 with RF-40WP receiver SS20WR waterproof steering servo Body: GT2X trimmed with Vaughn Gitten Jr. competition graphics and all sponsor decals applied, universal fit body mounts Shocks: Oil-filled, composite plastic body Shock Towers: Composite plastic Suspension: Aluminum front and rear braces, stainless steel bulkhead lower plates Wheels: Green plastic 2.2" Classic King, 12mm hexes Tires: Power Pin, white firmness compound Ball Bearings: Full set Bumpers: Front and rear skid plate type Pinion Gear: 28T Spur Gear: Drive gear, metal 49T/idler gear 32T-56T INCLUDES Preassembled Savage XS Flux Mini Monster Truck w/2.4GHz Radio System, 4400Kv Motor, ESC, Trimmed and Painted Body & Instruction Manual REQUIREMENTS Track and maintenance equipment SPECIFICATIONS Vehicle; Length: 14.17" (360mm) Width: 11.02" (280mm) Height: 6.29" (160mm) Wheelbase: 8.85" (225mm) Weight: 4.73lbs (2.15kg) without batteries Body; Length: 12.79" (325mm) Width: 5.90" (150mm) Height: 3.74" (95mm)

4.495,-

4.895,-

** Ikke på lager

KJØP

-8%

DynoMAX 9841 Connector Adapter T-Plug (male) - EC3 ...

9841 Connector Adapter T-Plug (male) - EC3 (female) DynoMAX Connector Adapter T-Plug (male) - EC3 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an EC3 connector without soldering etc. It also works if you have an charge lead with an EC3 connector but you have an vehicle with a T-Plug (deans) connector system.

49,-

** Ikke på lager

KJØP

Traxxas 3935A Body Clips Angled Black (10)

Body clip (mounting clip), angled, 90-degrees (black) (10)

39,-

På lager 3

KJØP

DynoMAX 9703 Charge Lead T-Plug with 4mm banana plugs

Charge Lead T-Plug with 4mm banana plugs

99,-

** Ikke på lager

KJØP

Traxxas 3415 Tool Kit

Traxxas 13-Piece Tool Kit with Carrying Case The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

På lager 2

KJØP

-9%

Absima 650CPS / 51WT Silicone Shock Oil 60ml

Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

På lager 3

KJØP

Vant 7.4V 5200mAh 35C Deans-XH

Informasjon

Produsent

Modelsport AS

Kunder kjøpte også

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Vant 7.4V 5200mAh 35C Deans-XH

Informasjon

Produsent

Modelsport AS

Kunder kjøpte også

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys