Hopp til innhold

UDI Firefly Mini Drone RTF - Blue

Art.nr: U46S(B)

445,-

UDI

UDI

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Mikrodrone
Lettflydd
Tre batterier følger med

Morsom, tøff liten drone fra UDI med alle de funksjoner man er vant med i de større modellene. Ønsker du en liten flight i stua eller på kontoret er denne perfekt, og når den skal pakkes bort til neste gang får den plass i kontorskuffen. Modellen leveres med 3x batterier, så her er det mulighet for mye moro når du først skal i lufta!

PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.

 

Spennende funksjoner

Modellen leveres med flere spennende funksjoner; Altitude hold lar deg fly mens dronen selv passer på å holde samme høyde. Heading Hold Mode gjør at du kan fly, uten å tenke på sideveis rotasjon på modellen. Skyver du stikken vekk fra deg flyr modellen vekk og motsatt. Dette uansett geografisk retning dronen er vendt. One Button Take Off/landing. Ved å trykke på en knapp håndterer dronen selv takeoff/landing, som ofte kan være utfordrende å gjøre selvi starten for nybegynnere. High/Low Speed Mode tilpasser du modellens hastighet til din egen eller pilotens nivå.
 

UDI Firefly Mini Drone RTF - Blue

Varslinger

Out of Range Alarm gir deg varsel når modellen nærmer seg maks av senderens rekkevidde, tilsvarende Low Battery Alarm gir deg et varsel når det er på tide å lande å bytte/lade batteri. Ved å switche mellom

Innhold i esken

UDI Firefly Mini Drone RTF - Blue

  • 1x U46S Mini drone
  • 1x 2.4G Sender
  • 3x 180mAh 3.7V drivbatterier
  • 1x USB-lader
  • 4x Ekstrapropeller
  • 1x Bruksanvisning

Det eneste du behøver utenom er 3x AAA batterier til senderen.



PS! Dette er ikke en kameradrone. I front av dronen er det montert et LED-lys. Dette må ikke forveksles med kameralinse.

Produsent

UDI - Radiostyrte biler, båter og droner

Kunder kjøpte også

Komplett FPV mode App-kompatibel 7min flytid Flere kule funksjoner! UDI her med en tøff liten drone med funskjoner som auto takeoff/landing, stabilisering av flyretning og høyde for å nevne noe. Om du ønsker å fly i sanntid plasserer du enkelt smarttelefonen din i mobilholderen på radio og kobler dronen opp mot UDI-appen! PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   Funksjoner Live-feed Bilde til telefon i 480P / 20fps Høydehold-modusen Gjør flyturen mer stabil og enklere å kontrollere. Du kan la Beetle holde seg i en viss høyde slik at den kan filme bedre Takeoff/Landing Dronen vil ta av/lande automatisk som gjør start og slutt på flyturen enda mer bekymringsfri Hold mode Hvis du ønsker hjelp med å holde retningen på dronen kan du aktivere kursholdmodus i begynnelsen av flyturen, og dermed kan du fly dronen enkelt Kamerajustering Kamera kan justeres med 90 grader om du f.eks ønsker et bredere bilde, dette gjøres via appen "Flyingsee" Alarm Beetledronen er utstyrt med alarmer som gir deg beskjed om du flyr for langt unna og lavt batteri FPV Ved bruk av appen kan du få livebilde fra dronen som gir deg muligheten til å fly i sanntid Eskens innhold I esken finner du UDI Beetle dronen, radio, usb-lader, 1x 3,7V 500mah LiPo-batteri, skrujern, propellverktøy og propeller. Du behøver 4stk AA-batterier. PS! Det medfølger kun 1x drivbatteri til dronen, selv om det på noen bilder/klipp kan være avbildet flere. Batteriene er enkelt utskiftbare og ytterligere kan kjøpes separat. Spesifikasjoner Flytid 6-7min Ladetid 75min Rekkevidde radio Opp til 50m Rekkevidde FPV Opp til 20-30m Batteri 3.7V 500mah LiPo Dimensjoner 140x140x43.5mm Vekt 63g  

749,-

799,-

KJØP
-6%
RedCat Ascent-18-R  1/18 Rock Crawler RED - Complete Scale rock crawling has garnered immense popularity, attracting enthusiasts who relish navigating challenging terrains and conquering obstacles with specialized vehicles. We at Redcat have earned well deserved respect in the 1:10 scale crawling community by offering high-quality competitive vehicles at a reasonable price. With the Ascent-18, we have brought the same level of quality, performance, and affordability found in our 1:10 scale crawlers into the 1:18 scale crawler market. While this small 1:18 scale crawler may fit in your hand, it is extremely capable and boasts high-end features typically found in larger-scale competitive crawlers.   The Ascent-18 features ball bearings, hex drive hardware, portal axles, impressive steering angle, aluminum chassis rails, metal ring and pinion gears, machined aluminum spools, metal portal gears, 7mm wheel hexes, powerful 180 sized motor, precision metal geared micro servo, aluminum capped oil filled shocks, 750 mAh 2S LIPO battery pack and of course a Redcat 2.4Ghz radio system. We also launched a complete line of performance hop up parts that are available for the Ascent-18. We think you’ll be excited to see which performance parts we’ve decided to offer, as we think it will bring the already capable Ascent-18 to a whole new level Ball bearings: The Ascent-18 uses ball bearings, instead of bushings, throughout the vehicle to ensure smooth operation and longevity, setting it apart in the 1:18 scale crawler market. Hex hardware: We have used high quality hex hardware for durability and ease of routine maintenance. Impressive steering angle: The Ascent-18 features an impressive amount of steering. Its steering angle helps the Ascent-18 to pull through tight situations while navigating its way through gnarly obstacles. Precision metal geared micro servo: The included Hexfly HX-M4K 4kg coreless metal gear micro servo may be small, but it packs a punch. Aluminum chassis rails: A 2mm flat rail aluminum chassis is the perfect balance of strength and performance. It’s lightweight allows the Ascent-18 to glide over obstacles while providing a rigid backbone for stable performance. Portal axles: Portal axles offer the benefits of increased ground clearance and reduced torque twist. Metal portal gears, ring gears and pinion gears are used to ensure the Ascent-18 runs smoothly time after time. Machined aluminum spools: The machined aluminum spools help to maintain constant traction to all four tires. 7mm wheel hexes: 7mm wheel hexes allow the driver to choose from many popular wheel and tire options on the market today. Aluminum capped oil filled shocks: Smooth action aluminum-capped oil filled shocks ensure consistent performance on every trail. Powerful 180 sized motor: The included 180 size motor is the biggest motor we could fit in such a small crawler. Additionally, there are already many motor upgrade options on the market today that will drop right into this amazing little crawler. Front tilt body: The Ascent-18's front tilt body mounting system simplifies maintenance and enhances its aesthetic appeal. The quarter turn locking mechanism makes keeping up with body clips a thing of the past. 2.4Ghz radio system: The included high quality 2.4Ghz radio system offers dual rates, channel reversing and trims for precision control. The receiver and ESC, which are built into a single compact unit, keep weight to a minimum and also maximize this tiny crawler’s chassis real estate. Ready-To-Run (RTR): The ascent-18 is completely Ready-To-Run and includes all electronics, radio, rechargeable 750 mAh 2S LIPO battery pack and charger. Specifications: Vehicle Scale 1/18 Engine / Motor RC180 Brushed Motor Transmission Forward & Reverse Drive System 4 Wheel Drive Length 218mm Width 130mm Height 114mm Servo Type 4kg Metal Gear Waterproof Servo Wheelbase 155mm Ground Clearance 42mm Chassis Type 2mm Flat Rail Aluminum Wheel Width 15mm Wheel Diameter 25.5mm Suspension Aluminum Capped Oil Filled Shocks Speed Control Type 2in1 ESC/Receiver Brushed Radio System 2.4GHz Radio System Battery 7.4v 750mAh LiPo with USB Charger Included Needed to Run 4 AA Batteries for Radio

1.895,-

1.995,-

KJØP
-5%
Scout II 1/18 bygger på Ascent-18 pickup platformen og leveres helt komplett og klar til å kjøre. Bilen er utrustet med oljefylte dempere med alu caps og hele karosseriet kan tiltes etter bare å rotere på en enkel mutter som gir deg enkel tilgang til elektronikken. Store dekk gir tøft utseende med gode klatreegenskaper og bilen leveres med et oppladbart 2s 750mah LiPo-batteri som gir lang kjøretid. Du behøver kun 4stk AA-batterier til kontrollen!   Et godt valg Scout II har en rekke med flotte funksjoner som flate aluminium chassisrails, maskinerte aluminium spoler, 7mm hex til dekk, oljefylte dempere med aluminium shock caps, 4kg styreservo, 180 børstemotor, metallgir og kulelagere, enkel karosseri håndtering og en god base for fremtidige oppgraderinger!   Eskens innhold Crawleren leveres med alt du behøver i esken. Ferdigbygget bil med lakkert karosseri, ferdigmontert radioutstyr, sender. Det følger også med et 2s 750mah LiPo batteri m/JST og USB-lader.   Spesifikasjoner ESC/Mottaker 2in1 Motor 180 size Radio 2.4GHz Servo 4kg MG WP Lengde 265mm Bredde 126mm Høyde 125mm Akselavstand 155mm Bakkeklaring 38mm Drivsystem 4WD Skala 1:18

2.395,-

2.895,-

KJØP
-17%
This is a pair of Traxxas B.F. Goodrich Mud Terrain KM2 Tires Pre-Mounted on SCT Wheels. FEATURES: Fits two wheel and four wheel drive 1/10 scale Traxxas Slash Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) SCT split-spoke chrome with red bead-loc wheels S1 compound Fits 4WD front/rear and 2WD rear INCLUDES: Two Mud Terrain T/A KM2 Tires and wheels SPECS: Outer Diameter: 4.3" (109mm) Width: 1.7" (43mm) Hex: 12mm

349,-

369,-

KJØP
-5%
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

KJØP
-12%
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

KJØP
-11%
Silicon Shock Oil Premium 50WT (600cSt) 60ml

99,-

109,-

KJØP
-9%
Yeah Racing 3x16mm Hex Socket Flat Head Titanium Screws Specification: Size: 3x16mm Material: Titanium Type: Machine Screw Type of Head: Flat Head Type of Drive Insert: Hex Socket Qty: 10pcs    Why you need Titanium Screws? Titanium, when pure, is a lustrous, white metal. It has a low density, good strength, is easily fabricated, and has excellent corrosion resistance. Titanium is as strong as steel, but 45% lighter. It is 60% heavier than aluminum, but twice as strong. Titanium screw is a perfect device for professional RC driver, like you, to make your RC car lighter in weight, and consequently run faster to beat your pals.

59,-

KJØP
QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png