Hopp til innhold

Traxxas 9520 Chassis Brace Front Sledge

Art.nr: TRX 9520

89,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Chassis Brace Front Sledge

 

Chassis brace, front/ 4x15 CCS (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 95076-4-BLUE
Copied
Traxxas Sledge™ 1/8 Truck 6s - Blue Redefining 1/8 Scale Off-Road! Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. New Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Sledgehammer Tires Premium Sledgehammer® tires are standard equipment. No tire upgrade required. Durable foam inserts are designed to not bunch up or break down. Patent-pending Traxxas innovation improves the tire bonding process to reduce the chance of a blown-out bead while exploring the upper range of Sledge’s capability. What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. Specs: Length (including wing): 604mm Front Track: 459mm Rear Track: 459mm Ground Clearance: 50mm Weight (no battery): 5.77kg Height (overall): 214mm Wheelbase: 384mm Shock Length (front): 128mm Shock Length (rear): 144mm Tire Diameter: 170 x 84mm Wheel Diameter: 97mm (3.8") Speed Control: Velineon® VXL-6s (#3485) Motor (electric): Velineon® 2000kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347oz-in torque) Top Speed: 112+ KPH with two 3S LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45mm* Wide configuration (L/W/H): 160 x 57 x 29/37/45mm* *Using included optional foam spacer Spec. Car Type: Truck, Truggy Delivered as: RTR (Ready-To-Run) Drive: 4WD Operating Mode: Electric Scale: 1/8 Suitable For: Experienced, Expert Surface: Grass, Gravel Length: 604 mm Ground Clearence: 50 mm Height: 214 mm Weight: 5770 g Width: 459 mm ESC: Traxxas Velineon VXL-6s Top Speed: 112km/h Transmitter: Traxxas TQi 2-Channel Motor Type: Brushless Motor/Engine: Traxxas Velineon 2000kV Battery: Not Included Charger: Not Included Water Proof: Yes

9.995,-

KONTAKT

Kunder kjøpte også

M-Drive MD95015 - Bag-5 PE Bottom Plate - 805x570mm This is an accessory plate made of lightweight, but rigid, PE material that is made to make the M-Drive Bag-5 floor/bottom more rigid. Specs: Fits M-Drive Bag-5 (MD95005) Size: 805x570mm Thickness: 3mm Material: PE foam

119,-

KJØP
M-Drive RC Bag 5 - Cars (XL) This 81 x 57.5 x 36cm black RC Vehicle bag from M-Drive is a lightweight case designed to safely store, transport & protect your 1/8 scale truck & monster truck and it's transmitter/charger. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. 1/8 Scale Trucks & Monster Trucks The RC Bag 5 is a practical soft and lightweight bag that can store most 1/8 scale (and larger) radio controlled trucks & monster trucks such as Traxxas Revo, E-Revo, Summit, T-Maxx, Unlimited Desert Racer (UDR), XO-1 & Sledge. It even fits the Traxxas X-Maxx if you don't use the internal dividers! RC Garage Storage This RC Car Bag is a practical storage place in your home when you’re not in using it. The perfect RC Garage Storage solution! Weather Resistant A heavy-duty 600D nylon shell shields your RC equipment from moisture and dust. Shoulder Strap The removable, easily adjustable shoulder strap includes a cushioned shoulder pad for comfort. Side Handles Heavy-duty rubber grip side handles add lifting and carrying options. Removeable Divider The internal dividers are removeable and lets you store your vehicle transmitter, charger, a few extra batteries and spare tires etc. Inside Size: Length: 81cm Width: 57.5cm Height: 36cm Inside Size With Dividers: Main area: 71.5 x 48 x 36cm Secondary area 1: 71.5 x 8.5 x 36cm Secondary area 2: 57.5 x 8.5 x 36cm

1.399,-

1.499,-

KJØP
-7%
Body Mount Rear Sledge

199,-

KJØP
Screw pin, 4x18mm (with threadlock) (6) Set of six 4x18 mm screw pins with hex-drive heads come with pre-applied threadlock.

49,-

59,-

KJØP
-17%
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
This is the Traxxas Countersunk 4 x 15mm Screws. FEATURES Metal construction Black in color INCLUDES Six 4 x 15mm countersunk flathead hex screws REQUIREMENTS Installation on the vehicle

35,-

KJØP
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
Traxxas 9517 Wing Red Sledge Wing (red)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Output Cup Diff F/R HD Sledge Differential output cup, front or rear (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2) Give your Sledge® the ultimate driveline upgrade with these hardened steel differential output cups. Built for maximum strength and durability, these heavy-duty output cups fit front or rear differentials and include 2.5x12 mm pins (2). Sold in pairs. Accessory part for these models: Sledge®

189,-

209,-

KJØP
-10%
Traxxas 9586X Differential output cup, center (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2) Give your Sledge® the ultimate driveline upgrade with these heavy-duty center differential output cups. Built for maximum strength and durability, these hardened steel output cups work with standard center driveshafts or the upgraded 9655X hardened steel center CV driveshafts. Includes 2.5x12 mm drive pins (2). Sold in pairs. Accessory part for these models: Sledge®

249,-

269,-

KJØP
-7%
Traxxas 9587 Drive Cup & Boots Set Diff F/R Sledge Drive cup, front or rear (hardened steel) (for differential pinion gear)/ driveshaft boots (2)/ boot retainers (2)

199,-

219,-

KJØP
-9%
Chassis Brace Rear Set Sledge Chassis braces (rear (1), rear tower (2))/ 4x15 CCS (2)

189,-

KJØP
Traxxas 7762X Rebuild kit, GTX shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks) Restore your GTX™ shocks' performance with this shock rebuild kit. Kit includes assembled lower cartridges, pistons, piston nuts, and bladders. One kit refreshes two shocks. Accessory part for these models: X-Maxx XRT

109,-

119,-

KJØP
-8%
Traxxas 9588 Shoulder Screws M3x16mm Hex Socket (2) Shoulder screws, 3x16mm (2)

29,-

KJØP
These are the 17mm Splined Wheel Nutsfor the Traxxas X-Maxx Monster Truck. FEATURES Aluminum construction, anodized blue in color Threads onto stub axles to hold wheels in place INCLUDES Four 17mm Splined Wheel Nuts

149,-

159,-

KJØP
-6%
Gens Ace Tattu 3S 450mAh - 75C - XT30 3s LiPo-pakke med høy C-rate for gode prestanda med høyt strømtrekk. 42 gram og ferdig med XT30-batteriplugg og XH balanseringplugg. Spesifikasjoner: Kapasitet: 450mAh Spenning: 3S 11.1V Vekt: 42gram Størrelse: 45x24x21mm Strømplugg: XT30   Product details in english Capacity: 450mAh Voltage: 11,1V Max Continuous Discharge: 75C (33,75A) Max Burst Discharge: 150C (67,5A) Weight:: 42g Dimensions: 45*24*21mm Balance Plug: JST-XH Discharge Plug: XT30 Charge Rate: 1-3C Recommended, 5C Max Battery Comments:All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction , and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high quality battery. Remarkable stacking technology enables single cell capacities of 450mAh High discharge performance and high energy density. Superior Japan and Korea Lithium Polymer raw materials Tattu batteries provide high quality, reliable power for your Multirotor FPV 150 size

175,-

KJØP
Suspension link, rear (upper) (aluminum, red-anodized) (10x206mm, center to center) (2) (assembled with hollow balls)

439,-

KJØP
These Limited Slip Diff Plates provide ideal replacement parts for your ARRMA vehicle   FEATURES: Precision stamped from high-quality stainless steel - Plates provide increased friction between the gears and the diff case resulting in a limited slip action to prevent 'diffing out' - Supplied as a set for one diff - To be used with 29mm diff case differentials   INCLUDES: 2 x Limited Diff Plate A 4 x Limited Diff Plate B 4 x Limited Diff Plate C   REQUIRES: To be used with 29mm diff case differentials

69,-

KJØP
SAVÖX SW-1210SGPLUS - Monster Torque High Voltage Water Proof Servo The SW-1210SG Plus is the premier waterproof digital servo in the Savox Lineup. This coreless servo provides great torque and is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow. Features: New: Soft Start High Voltage (Now 8.4V!) Strong unique steel gears provide durability and assurance Waterproof IP67 construction for harsh elements Ideal for cars, trucks and boats subject to water or snow Specifications: Torque @6V: 20kg/cm Torque @7.4V: 32kg/cm Torque @8.4V: 37kg/cm Speed @6V: 0.15 sec/60 deg Speed @7.4V: 0.13 sec/60 deg Speed @8.4V: 0.12 sec/60 deg Dimensions L x W x H: 40.6 x 20.7 x 42mm Weight: 71g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 120mA @6.0V, 150mA @7.4V Stall Current (at locked): 6000mA @6.0 V, 7400mA @7.4V Idle Current: 5mA @6.0V, 5mA @7.4V Wire Length: 150 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 333 Hz Motor Type: Coreless

1.249,-

1.349,-

KJØP
-7%
Sway Bar Kit Sledge   Sway bar kit, Sledge™ (front and rear) (includes front and rear sway bars and linkage)

419,-

439,-

KJØP
-5%
Traxxas 9537 Steering Blocks (Pair) Sledge Steering blocks, left & right/ M4x0.7 NL (4)

69,-

KJØP
Traxxas 9579R Ring Gear and Pinion (Machined) Sledge Ring gear, differential/ pinion gear, differential (machined) (front or rear)

649,-

KJØP
Traxxas 9534 Suspension Arm Rear Left Black Sledge Suspension arm, rear (left), black

159,-

KJØP
Traxxas 9533 Suspension Arm Rear Right Black Sledge Suspension arm, rear (right), black

149,-

159,-

KJØP
-6%
Traxxas Differential Gasket Set E-Revo 2, Sledge Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)  

49,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png