Hopp til innhold
-14%

Traxxas 8987 Gear Cover Set Maxx

Art.nr: TRX 8987

59,-

69,-

- 14%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Covers, gear (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas Battery Expansion Kit (for Taller Batteries) Maxx Battery expansion kit, Maxx® (allows for installation of taller battery packs)

129,-

KJØP
This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Heat Sink with tube of Thermal Paste and Instructions

89,-

99,-

KJØP
-10%
This is the 46T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 46T Spur Gear for the Traxxas XO-1

39,-

Ikke på lager
Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck platform. To take things up another level, the Traxxas WideMaxx kit extends the track width by 20 mm per side, allowing you to bury the throttle in the turns, soak up even more extreme terrain, and come out the other side ready for more.   The WideMaxx kit consists of extended versions of the Maxx’s extreme-duty cold-weather suspension arms, available in 6 total colors to allow you to customize your truck to your style. Additionally, new springs are included for the rear of the truck to dial in the suspension settings, while the original rear springs move to the front for optimum balance and performance. Finally, a set of wider toe links for the front finish out the new widened stance.   Available in six different color options Widens the Maxx by 1.57” (40 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspenson arms (4) WideMaxx toe links (2) Rear springs (1.725 rate)   Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you back to the action with a whole new driving experience even faster.     Optional WideMaxx Upgrades:   Steel CV Driveshafts Built to take brutal punishment in stride, the Maxx's optional steel CV driveshafts #8996X are extended specifically for the WideMaxx kit. The set features all-steel construction and includes all required bearings. (#8654, #8654G, or #8654R and #7758, #7758G, or #7758R required for a complete set). Shafts also available separately (#8996A).   TUBES Toe Links TUBES lightweight 7075-T6 aluminum toe links are 30% lighter than steel and stronger than titanium. These are the strongest toe links you can buy for your WideMaxx. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. TUBES are the perfect high-performance upgrade for your WideMaxx and come brilliantly anodized in four different colors: orange (#8997A), green (#8997G), red (#8997R), and blue (#8997X).

639,-

699,-

KJØP
-9%
Carrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW

49,-

KJØP
Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

219,-

KJØP
Housing, cush drive (front & rear halves)

39,-

49,-

KJØP
-20%
Cush drive key/ pin/ elastomer damper

39,-

49,-

KJØP
-20%
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  12mm (.63")           Threaded Length: 11mm (.45")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Ikke på lager
Wheel hubs, hex (2)/ 2.5x14 pins (2)

45,-

KJØP
RC PTFE BEARING SET WITH BEARING OIL FOR TRAXXAS 1/10 MAXX   Description: This is Yeah Racing RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.     Feature:   For : Traxxas 1/10 MAXX Material: Steel Shielding: Metal   Include:   Total 28pcs bearing -YB6011B 5mm x 8mm x 2.5mm-(2pcs) -YB6017B 6mm x 13mm x 5mm-(3pcs) -YB6053B 6mm x 16mm x 5mm-(4pcs) -YB6020B 8mm x 12mm x 3.5mm-(2pcs) -YB6022B 8mm x 16mm x 5mm-(1pc) -YB6023B 10mm x 15mm x 4mm-(4pcs) -YB6026B 12mm x 18mm x 4mm-(7pcs) -YB6027B 12mm x 21mm x 5mm-(3pcs) -YB6039B 15mm x 24mm x 5mm-(2pcs) YA-0215 Bearing Oil (1pc)

329,-

349,-

KJØP
-6%
Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 2.5x10 CS (2)/ 3x15 CCS (3)

159,-

KJØP
Traxxas 8953X - Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft) Replacement outer stub axle assembly. Fits front or rear. (Does not fit Maxx with WideMaxx® suspension.)

89,-

99,-

KJØP
-10%
Nuts, 5mm flanged nylon locking (steel, black serrated) (8)

49,-

KJØP
Input shaft, transmission

39,-

KJØP
Cush drive key/ pin/ elastomer damper

39,-

KJØP
This is the 50T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1

39,-

49,-

KJØP
-20%
This is a pair of pre-mounted Badlands 3.8" All Terrain Tires. Are you ready to tackle any terrain? If so, then the Badlands tires are the answer for you! The Badlands tires offer motocross style tread that is perfect for adrenaline-pumping Monster Truck and Truggy bashing. The Badlands tread is made strictly for the motocrosser in you. Its oversized grass and dirt shredding lugs offer you the ultimate in performance under all-terrain type conditions. The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new pre-mounted Badlands 3.8" tires now!   Tire Features: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Wheel Features: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included What`s included: Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2 pcs) 8x32 to 17mm 1/2" Offset Hex Adapters (2 pcs) M3 x 12mm long SHCS hardware (16 pcs)

849,-

899,-

KJØP
-6%
Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 23-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

79,-

99,-

KJØP
-20%
These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

KJØP
-9%
Ball bearings, blue rubber sealed (12x21x5mm) (2)

99,-

KJØP
Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx®)

1.395,-

1.595,-

KJØP
-13%
       This is a package of six 3x10mm Traxxas Cap Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm cap head screw is required INCLUDES: Six 3x15mm Traxxas Cap Head Screws REQUIRES: 2.5mm hex head wrench SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Ball bearings, black rubber sealed (12x18x4mm) (2)

109,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png