Hopp til innhold
-11%

Traxxas 7723 Nerf Bars Chassis (2)

Art.nr: TRX 7723

79,-

89,-

- 11%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Chassis Nerf Bars for the Traxxas X-Maxx Monster Truck

FEATURES

Molded composite plastic construction

Fastens to each side of the chassis to help reduce damage from sideimpacts

INCLUDES

Left and Right Chassis Nerf Bars

SPECIFICATIONS

Length: 8.2" (209mm)

Height: 1.2" (31mm)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

These are the Wheel Hex Clipsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place INCLUDES Six Wheel Hex Clips

39,-

KJØP
Chassis XRT

249,-

Battery Hold-down Mounts XRT Battery hold-down mounts, left (2)/ right (2)/ 4x15mm CCS (4) Set of left (2) and right (2) battery hold-down mounts with 4x15 mm screws (4)

69,-

89,-

KJØP
-22%
Bumper Mount Rear XRT

69,-

KJØP
Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

KJØP
-11%
High Intensity LED Light Kit for X-Maxx   Rugged Innovation The X-Maxx LED Light Kit is the only light kit worthy of the X-Maxx name. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing.       X-MAXX LED LIGHT KIT (#7885) INCLUDES:   High-output bumper mounted LED light bar Multi-function rear LED light bar High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance  (no flickering or dimming as the battery voltage changes) Breakaway cable helps to prevent damage when removing body Light bar mounts and wiring connectors       Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-8s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures.   High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-8s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance.     Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing X-Maxx owners to select the exact setup to meet their needs.     QUICK FEATURES ON X-MAXX LED LIGHT KIT (#7885)   Compatible with Velineon VXL-8s ESC #3496 A Traxxas first! Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Expandable Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components         LED Configuration with Traxxas Link App   MODEL 7885: X-MAXX LED Light Kit *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

1.195,-

1.395,-

KJØP
-14%
These are the 17mm Splined Wheel Nuts for the Traxxas X-Maxx Monster Truck. FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place INCLUDES Four 17mm Splined Wheel Nuts

149,-

159,-

KJØP
-6%
Input gear, transmission, 22-tooth/ 2.5x12mm pin

49,-

KJØP
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

KJØP
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

KJØP
This is the Differential Carrier  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction   INCLUDES Differential Carrier  Two X-Ring Gaskets  Two Ring Gear Gaskets

55,-

KJØP
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

KJØP
-13%
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

KJØP
-8%
Center drive, torque-biasing (assembled)/ 17x26x5 ball bearings (2) (requires #7727X bulkheads)

849,-

KJØP
Bulkhead tie bar, upper (1)/ lower (2) (steel)

119,-

129,-

KJØP
-8%
Motor mounts (front and rear)/ pin (1)

119,-

KJØP
Traxxas 5101A - Ballbearing 12x21x5mm - Black Rubber Seal (2) 5101A with Black seal: Rubber seal in full contact with the inner ball race More rotational resistance Less maintenance needed 5101 with Blue seal: Rubber seal not in contact with the inner ball race Less rotational resistance More maintenance needed

99,-

109,-

KJØP
-9%
Traxxas 7880 - Pro-Built X-Maxx 8s Front Differential Differential, front, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas.

699,-

799,-

KJØP
-13%
Ring gear, differential/ pinion gear, differential (rear)

189,-

KJØP
Input shaft, transmission

39,-

KJØP
Oil Differential 20m Weight

179,-

KJØP
Bulkhead Front Upper & Lower Maxx

149,-

KJØP
Traxxas 6494R Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

149,-

159,-

KJØP
-6%
This is a package of cable ties.     FEATURES Easily holds wires in place & other small items INCLUDES 10 Black cable ties SPECIFICATIONS 3 1/16" long (76mm)  3/32" wide (2.5mm)

25,-

KJØP
Traxxas 7881 - Pro-Built X-Maxx 8s Rear Differential Differential, rear, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: X-Maxx®

649,-

749,-

KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png