Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / X-Maxx 6S / Traxxas 7724 Receiver box set
-11%

Traxxas 7724 Receiver box set

Art.nr: TRX 7724

79,-

89,-

- 11%
Traxxas

Traxxas
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 7757 Wheel Hex Clips X-Maxx (6)
Traxxas 7757 Wheel Hex Clips X-Maxx (6)
These are the Wheel Hex Clipsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place INCLUDES Six Wheel Hex Clips

39,-

KJØP
Hovedbilde Traxxas 7893G Suspension Arm Lower Right F/R Green ...
Traxxas 7893G Suspension Arm Lower Right F/R Green ...
Suspension arm, lower, green (1) (right, front or rear) (for use with #7895G X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

179,-

199,-

KJØP
-10%
Hovedbilde Traxxas 7839 Shock tower Front XRT
Traxxas 7839 Shock tower Front XRT
Traxxas 7839 Shock tower, front (left & right halves) Left and right front shock tower halves Replacement part for these models: XRT™

119,-

139,-

KJØP
-14%
Hovedbilde Traxxas 7892G Suspension Arms Upper F/R Green (Pair) ...
Traxxas 7892G Suspension Arms Upper F/R Green (Pair) ...
Suspension arms, upper, green (left or right, front or rear) (2) (for use with #7895G X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

149,-

KJØP
Hovedbilde Traxxas 7897 Toe Links Front Black (2) X-Maxx ...
Traxxas 7897 Toe Links Front Black (2) X-Maxx ...
Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)   203 mm fixed composite (188 mm center to center) toe links are direct replacements for the WideMaxx® suspension kit.

139,-

KJØP
Hovedbilde Traxxas 7838 Shock Tower Rear XRT
Traxxas 7838 Shock Tower Rear XRT
Traxxas 7838 Shock tower, rear (left & right halves) Left and right rear shock tower halves Replacement part for these models: XRT™

119,-

139,-

KJØP
-14%
Hovedbilde Traxxas 9033-BLUE Shock Tower Front EHD Blue Jato 4x4
Traxxas 9033-BLUE Shock Tower Front EHD Blue Jato 4x4
Traxxas 9033-BLUE Shock Tower Front EHD Blue Jato 4x4   Shock tower, front (blue)

79,-

KJØP
Hovedbilde Traxxas 9034-BLUE Shock Tower Rear EHD Blue Jato 4x4
Traxxas 9034-BLUE Shock Tower Rear EHD Blue Jato 4x4
Traxxas 9034-BLUE Shock Tower Rear EHD Blue Jato 4x4   Shock tower, rear (blue)

79,-

KJØP
Hovedbilde Traxxas 7422-DKGRY Chassis Charcoal Gray Jato 4x4
Traxxas 7422-DKGRY Chassis Charcoal Gray Jato 4x4
Traxxas 7422-DKGRY Chassis Charcoal Gray Jato 4x4 Chassis, charcoal gray

259,-

279,-

KJØP
-7%
Hovedbilde Traxxas 7827X Bulkhead Rear Lower XRT
Traxxas 7827X Bulkhead Rear Lower XRT
Traxxas 7827X Bulkhead, rear (lower) Replacement XRT rear lower bulkhead

249,-

KJØP
Hovedbilde Traxxas 7894G Suspension Arm Lower Left F/R Green ...
Traxxas 7894G Suspension Arm Lower Left F/R Green ...
Suspension arm, lower, green (1) (left, front or rear) (for use with #7895G X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

189,-

199,-

KJØP
-5%
Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit
Tamiya 58719 BBX Buggy BB-01 Kit
Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match! Key Features: • The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. • NEW: Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. • The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. • The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. • The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. • Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. • Features full ball bearings and universal drive shafts. • Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. • NEW: New metal-plated bead lock type wheels are paired with NEW large-diameter tires. • Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. (Spare tire may be purchased separately for added realism) • Requires 2-channel radio, low profile steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.   Option parts fra Yeah Racing. Link: Trykk her! Link: Trykk her! Link: Trykk her! Link:  Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her!     About Tamiya 1/10 Buggy BBX (BB-01 Chassis) Announced at Nuremberg International Toy Fair on Feb 2023. Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match!   1/10 R/C assembly kit. Length: 414mm, height: 136mm, width: 233mm. Wheelbase: 283mm. The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. ewly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. Features full ball bearings and universal drive shafts. Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. New metal-plated bead lock type wheels are paired with NEW large-diameter tires. Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. Requires 2-channel radio, steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

3.895,-

4.395,-

KJØP
-11%
Hovedbilde Traxxas 7818 Wing mounts XRT
Traxxas 7818 Wing mounts XRT
Wing mounts XRT

99,-

119,-

KJØP
-17%
Hovedbilde Traxxas 7820 Servo Mount / Bulkhead Cover Set XRT
Traxxas 7820 Servo Mount / Bulkhead Cover Set XRT
Servo Mount / Bulkhead Cover Set XRT Servo mount/ bulkhead cover/ chassis brace/ steering cover/ 3x12mm CS (2)/ 3x8mm CS (2) Replacement XRT™ chassis brace with servo mount, bulkhead cover, steering cover, 3x12 mm screws (2) and 3x8 mm screws (2).

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 7844 Skidplate Set Front & Rear with Rubber ...
Traxxas 7844 Skidplate Set Front & Rear with Rubber ...
Skidplate Set Front & Rear with Rubber Impact Cushion XRT Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cusion

119,-

149,-

KJØP
-20%
Hovedbilde Traxxas 7815 Body Mounts Front & Rear XRT
Traxxas 7815 Body Mounts Front & Rear XRT
Body Mounts Front & Rear XRT Body mounts, front & rear Set of XRT™ front and rear molded body mounts. Fits 7812 body.

189,-

209,-

KJØP
-10%
Hovedbilde Traxxas 9032X Caster Blocks (C-Hub) HD Blue L+R (for ...
Traxxas 9032X Caster Blocks (C-Hub) HD Blue L+R (for ...
Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

89,-

KJØP
Hovedbilde Traxxas 9037X Steering Blocks HD Blue L+R (for Upgrade ...
Traxxas 9037X Steering Blocks HD Blue L+R (for Upgrade ...
Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement steering blocks for the Extreme Heavy Duty Upgrade Kit. Steering blocks are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

69,-

KJØP
Hovedbilde Traxxas 9050X Stub Axle Carriers Rear HD (Pair) Blue ...
Traxxas 9050X Stub Axle Carriers Rear HD (Pair) Blue ...
Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 5040 Oil Differential 20m Weight
Traxxas 5040 Oil Differential 20m Weight
Oil Differential 20m Weight

179,-

KJØP
Hovedbilde MIP 9207 1.5mm Hex Driver Wrench Gen 2 Hovedbilde MIP 9207 1.5mm Hex Driver Wrench Gen 2
MIP 9207 1.5mm Hex Driver Wrench Gen 2
#9207 - MIP 1.5mm Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the go-to gear for RC enthusiasts who demand the best. The iconic amber handles and rock-solid build have become synonymous with precision, performance, and passion. But even legends deserve an upgrade, and that's where the all-new MIP Gen 2 tools come in.   No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, each tool now sports a vibrant color-coded ring for instant identification.   Consistency is King: The MIP Gen 2 line is designed to create a cohesive look and feel across your entire tool collection. The subtle yet impactful design tweaks reinforce the iconic MIP identity, making it easier than ever to spot those legendary amber handles in your toolbox. It's not just about aesthetics, it's about building a sense of confidence and reliability that comes from knowing you're using the best.   Evolution, Not Revolution: Don't worry, the core of what makes a MIP tool a MIP tool remains unchanged. The rock-solid construction, the precise tolerances, the uncompromising quality – it's all there, just enhanced and refined. The Gen 2 update is about building on the legacy, not abandoning it. It's about taking the tools you love and making them even more awesome while making every tweak, tune, and adjustment smoother, faster, and more satisfying than ever before.   So, are you ready to experience the next level of RC tool awesomeness? Experience the future of RC tools with MIP Gen 2 Tools!   Package Includes:   1 x .1.5mm Hand Wrench   Tool Makeup:   Precision Ground with Diamond wheels to remove internal stress and part fatigue Made from US Grade tool steel drill blanks  Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !  Super Comfy to the hand, Acetate Handles that are resilient to hot and cold weather so won't harm your hands in poor weather conditions. Every tool assembled by hand  Manufactured and packaged 100% in the USA Accolades: Highly regarded as the #1 Tool in the RC industry for almost 30 years of production. Used by World Champions and hobbyists alike around the World Trusted wrench to get out stripped screws other sub par tools create  World Class Products, Precision Tools, Race Proven Performance, That's MIP!

289,-

Ikke på lager
Hovedbilde Traxxas 7726 Bulkhead tie bar upper set
Traxxas 7726 Bulkhead tie bar upper set
Bulkhead tie bar, upper (1)/ lower (2) (steel)

119,-

129,-

KJØP
-8%
Hovedbilde Traxxas 7775 Wheels (2) (for #7776 wheelie bar)
Traxxas 7775 Wheels (2) (for #7776 wheelie bar)
Wheels (2) (for #7776 wheelie bar)

59,-

KJØP
Hovedbilde Traxxas 2595 Screws 4x35mm Button-Head Machine (Hex ...
Traxxas 2595 Screws 4x35mm Button-Head Machine (Hex ...
  These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck       FEATURES Steel construction Secures the toe links to the steering blocks     INCLUDES Six 4x35mm Button Head Machine Screws     REQUIREMENTS 2.5mm Hex Wrench     SPECIFICATIONS Diameter: 4mm Length: 35mm

39,-

KJØP
Hovedbilde Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx
Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx
This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball cups  Connects steering assembly to each steering block   INCLUDES Left and Right Toe Link   SPECIFICATIONS  Total Length: 6.8" (173mm)  Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png