Hopp til innhold

Traxxas 4120 Clutch Bell Steel 20T

Art.nr: TRX 4120

149,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Traxxas 20 Tooth Steel Replacement Clutch Bell.

This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.

FEATURES

Fits all Traxxas 1/10th scale nitro vehicles.

Replaces worn or damaged clutch bells.

Constructed of hardened steel.

INCLUDES

One Traxxas 20 Tooth Steel Replacement Clutch Bell.

Two 5mm x 11mm 0.5mm fiber washers.

Two 5mm E-clips.

REQUIREMENTS

Disassembly of flywheel, clutch shoes, and adapter unit.

Two 5mm x 11mm bearings

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

         This is a 38T Spur Gear for the Traxxas Revo. FEATURES: Black plastic construction           Three countersunk mounting holes INCLUDES: One 38T spur gear    Part #3954 REQUIRES: Installation on the Traxxas Revo SPECS:    Number of teeth:     38           Diameter:        1.58"      (40mm)           Pitch:           1.0 metric

35,-

Ikke på lager
These are the Mounts for the Traxxas RPM Sensor           (Nitro Engines) and 3x10 CS with Split and Flat Washers (2) FEATURES: Plastic and metal construction INCLUDES: Three different plastic mounts           Two plastic spacers           Two flat washers           Two split washers           Two hex socket screws COMMENTS: These mounts can be used with              Traxxas Sensor RPM Long 3x4mm BCS XO-1 (2)              Traxxas Sensor RPM Short 3x4mm BCS (2)

45,-

KJØP
RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by high quality steel. Pre-lubricated to ensure its excellent performance! Feature:   Material: Bearing Steel Shielding: Metal   Specification:   5 x 10 x 4mm   Include:   Bearing  (10pcs)  

79,-

89,-

KJØP
-11%
Wiring harness, on-board radio system (includes on/off switch and charge jack) (Jato)

79,-

KJØP
O-ring, header 12.2x1mm (TRX® 2.5, 2.5R, 3.3)

19,-

KJØP
  Gaskets, cooling head: 0.15, 0.25, 0.35mm (1 each) (TRX 2.5, 2.5R)

39,-

KJØP
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
This is a package of three Air Filter/Pre-Filter Foam Inserts  for the Traxxas .20 cu in (3.3cc) racing engine.   FEATURES Constructed of foam and pre-oiled to trap dirt  Pre-Filter for extra filtration   INCLUDES Three Air FIlter Inserts for the Traxxas 3.3 engine   REQUIREMENTS Installing in air filter boot on engine     SPECIFICATIONS  Height: 38mm (1.5")  Diameter: 38mm (1.5")

129,-

139,-

KJØP
-7%
This is the replacement Right Side Electronics Box for the Traxxas Revo.  These parts attach directly to the chassis.   FEATURES Black plastic construction   INCLUDES One right electronics box  One box cover/charge jack plug  Three pieces of adhesive backed foam padding   REQUIREMENTS Nothing. These are direct replacement parts.   COMMENTS These electronics box components are designed specifically for the  Traxxas Revo and will not work for other Traxxas vehicles.

99,-

KJØP
These are the replacement FWD/REV Output Gears for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Nylon Construction           Black and White in Color   INCLUDES: One Nylon FWD Output Gear           One Nylon REV Output Gear           One White Nylon Drive Dog Carrier   REQUIRES: Assembly onto Vehicle   SPECS:    FWD Gear-            Diameter:   30mm (0.94")            Thickness: 5.8mm (0.23")            Teeth:     28T           REV Gear-            Diameter:   30mm (0.94")            Thickness: 9.5mm (0.37")            Teeth:     28T

115,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is the Long Temperature and Voltage Sensor from Traxxas. FEATURES: Functions with the Traxxas Link system to display battery voltage and             temperature INCLUDES: Long Temperature and Voltage Sensor with Mounting Screw SPECS:    Length: 14" (356mm)

139,-

159,-

KJØP
-13%
This is the Steering Linkage for the Traxxas Revo. FEATURES: Connects between servo horns and steering arms INCLUDES: Two 3x30mm steel turnbuckles, four short rod ends and four hollow             balls REQUIRES: Installing on steering assembly according to instructions in manual

45,-

KJØP
This is the Glow Plug Lead Wire for the Revo EZ Starting System.     This attaches to the glow plug prong to heat the plug during starting. FEATURES: Blue silicone insulated wire with pre-installed connectors INCLUDES: One glow plug wire lead           One Molex pin extractor tool REQUIRES: Nothing.  This is a direct replacement part.

25,-

Ikke på lager
This is the Long RPM Sensor for the                    XO-1 On-Road Car from Traxxas. FEATURES: Functions with the Traxxas Link system to display motor RPM INCLUDES: Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws PECS:    Length: 15" (381mm)  

139,-

KJØP
These are the replacement GTR Shock Retainers for                  the Traxxas Revo Monster Truck. FEATURES: Nylon Construction           Black in Color INCLUDES: Two Black Nylon GTR Shock Caps           Two Black Nylon GTR Spring Adjusters           Two Black Nylon GTR Spring Retainers           Two Black Nylon GTR Shock Bottoms           Four Silver Metal Hollow Balls REQUIRES: Assembly onto Vehicle.

59,-

KJØP
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
-14%
Tires & wheels, assembled, glued (black wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

569,-

KJØP
This is the optional .8 Metric Pitch 62 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 62T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2" (51mm)           Thickness: .23" (6mm)

39,-

KJØP
This is the 58 Tooth Spur Gear.       FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 58T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
  This is the Drag Link w/Bearing               for the Traxxas Nitro Jato Stadium Truck. FEATURES: Aluminum Construction           Anodized Blue in Color INCLUDES: One Drag Link w/Pre-Installed Bearings           Four 5mm x 8mm Washers REQUIRES: Assembly onto Vehicle

215,-

KJØP
This is the Differential Gear              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction           Black in color INCLUDES: One Differential Gear 38T           One Differential Side Cover           One Differential Gasket           Two Output Gear Seals           Four 2.5mm x 8mm Countersunk Socket Head Screws           Two 5mm x 10.5mm Flat Washers           One Differential Drive Gear 20T REQUIRES: Assembly onto Vehicle

129,-

KJØP
 This is the optional Aluminum Turnbuckle set for the Traxxas Jato. FEATURES: Anodized aluminum construction, red in color           Black nylon ball ends INCLUDES: Four 58mm camber links with 31mm hollow ball ends           Two 61mm front toe links with 31mm hollow ball ends           One 5mm aluminum wrench REQUIRES: Installing on Jato

399,-

KJØP
These are the Front Left and Right Wheel Spindles                   for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: One Left Front Wheel Spindle           One Right Front Wheel Spindle REQUIRES: Assembly onto Vehicle

99,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png