Hopp til innhold

Traxxas 3964 Cap Head Machine Screw 3x32mm Revo (6)

Art.nr: TRX 3964

35,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a package of six 3X32mm Cap Head Screws from Traxxas.


FEATURES: Black finish
          Steel construction
          Cap head design


INCLUDES: (6) 3X32mm cap head machine screws


SPECS:    Length:   1.260"    (32mm)
          Diameter:  .119"    ( 3mm)
          MM Pitch:  .5 coarse

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR (TRAC07**). FEATURES: Nylon construction           Installed foam pads           Grey in color           Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor             modification INCLUDES: One Chassis with foam pads           Instruction sheet for use with E-Revo Brushless and Summit REQUIRES: Installation of all other components SPECS:    Length: 434mm (17")           Width: 150mm (5.9")           Height: 38mm (1.5")

329,-

KJØP
This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10* FEATURES Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs) Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Demo mode checks available settings without connecting device to computer Downloadable updates INCLUDES Castle Link V3 USB Programming Kit with Standard USB Cable COMMENTS *Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

379,-

439,-

KJØP
-14%
These are the 6mm Front Stub Axles for the Traxxas XO-1. FEATURES: Hardened steel construction           6mm diameter at axle pin area INCLUDES: Two 6mm Front Stub Axles

99,-

KJØP
      These are the optional 17mm Splined Wheel Nuts for the New              T-Maxx 3.3 4WD Nitro Monster Truck RTR FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel nuts REQUIRES: Installation on the vehicle

129,-

149,-

KJØP
-13%
These are the 4x16mm Button Head Machine Screws from Traxxas. FEATURES: For use in the Traxxas Revo and also anywhere a screw this size is             required           Steel construction, black in color INCLUDES: Six 4x16mm Button Head Machine Screws REQUIRES: 2.5mm hex wrench SPECS:    Length: 16mm           Diameter: 4mm

39,-

KJØP
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
This is a pair of stock replacement Rear Suspension Arms for the Traxxas Revo.                    These arms attach to the rear bulkhead. FEATURES: Black nylon construction INCLUDES: One upper rear suspension arm           One lower rear suspension arm REQUIRES: Nothing.  These are direct replacement parts. COMMENTS: Since these are symmetrical, they can be used on left or right side.

89,-

KJØP
These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS:    Length: 12mm           Diameter: 3mm    

39,-

Ikke på lager
Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas                       for the Bandit. FEATURES: Gray composite bodies           Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.  

259,-

289,-

KJØP
-10%
This is the Suspension Pin Set for the Traxxas Slash 4X4.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction           Silver in color INCLUDES: Four 51.5mm pins           Four 30mm pins REQUIRES: Installation on the Slash 4x4  

55,-

KJØP
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

KJØP
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Cars. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

39,-

55,-

Ikke på lager
-29%
Vapex VP99369 - Li-Po 3S 11.1V 3000mAh 35C Battery This is a new hardcase 3-cell 3000mAh Lithium Polymer chemestry power battery for RC vehicles. Specs: Battery: 3S 11.1V Li-Po Hardcase Battery Capacity: 3000mAh Energy: 33.3Wh C-Rating: 35 Power Wires: 12AWG Power Connector: T-Plug Balancing Connector: XH Length: 96 mm Width: 46.5 mm Height/Thickness: 25.1 mm Weight: 211 g

649,-

KJØP
This is the Robinson Racing standard alloy 32 pitch pinion gears, a great replacment for most Kyosho cars and any cars that are 32 pitch. SPECS:   Number of Teeth: 10 Pitch: 32

89,-

KJØP
Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch. SPECS:   Number of Teeth: 12 Pitch: 32

89,-

KJØP
These are 3x25mm Button Head Machine Screws w/hex drive                         for the REVO from Traxxas. FEATURES: Black steel construction INCLUDES: Six 3x25mm Button Head Machine Screws REQUIRES: 2mm hex wrench SPECS:    Length:  25mm           Diameter: 3mm

35,-

KJØP
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

KJØP
These are the Traxxas Button-Head 3 x 40mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 40mm button-head hex machine screws REQUIRES: Installation on the vehicle

39,-

KJØP
Vapex Li-Po Battery 3S 11,1V 1300mAh 30C T-Connector Suitable for: Airplanes & Boats etc Battery: LiPo 3S 11.1V 1300mAh 30C 15Wh Max Discharge: 39A Continuous / 78A Burst Charge: Max 3C/3.9A (fast) Connector: T Wire: 13AWG Balance Connector: XH Length: 75 mm Width: 33.8 mm Height: 22 mm Weight: 105 g   ype of Battery: Li-Po Length: 74,5 mm Height: 23 mm Weight: 101 g Width: 34 mm Capacity: 1300 mAh Number of cells: 3 Voltage: 11,1 V C-Rating: 30 C Power connector: T-Connector Balancing connector: JST_XH Cable: 13 AWG

289,-

309,-

KJØP
-6%
This is the Front Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo

185,-

KJØP
This is a 6 pack of Traxxas 4X6mm Button Head Screws. FEATURES: Steel construction           Black in color           Button head design INCLUDES: (6) 4X6mm button head screws SPECS:    Length:        1/4"      (6mm)           Diameter:      3/16"     (4mm)

39,-

KJØP
      These are the Front and Rear Blue Aluminum Bulkhead Tie Bars                         for the REVO from Traxxas. FEATURES: Blue anodixed aluminum (2.5mm thick) INCLUDES: One front & one rear Tie Bar w/one 3x10mm button head screw REQUIRES: Button Head Screw 3X15mm for rear (TRX 2579) COMMENTS: The flat tie bar is for the rear

99,-

KJØP
This is the Traxxas TQi 2-Channel 2.4GHz Transmitter Receiver and Servos not Included. FEATURES Can be equipped with the Traxxas Link Wireless Module TRX 6511 and used with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Simple two-button programming interface Built-in failsafe Automatic model recognition recalls settings for up to 30 Traxxas Link enabled models Adjustable throttle and steering endpoints Multi-Function knob can be programmed to control Steering Sensitivity Throttle Sensitivity, Steering Percentage, Braking Percentage, or Throttle Trim INCLUDES Traxxas TQi 2-Channel 2.4GHz Transmitter REQUIREMENTS AA Batteries: Four for transmitter Servos and receiver of modeler's choice COMMENTS * Traxxas Link Wireless Module is not included and must be purchased separately.

995,-

1.095,-

KJØP
-9%
LiPo Cell Voltage Checker/Balancer (2968X)  The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.  NOTE: Do not attempt to use the battery adapters for charging or any purpose other than adapting Traxxas iD batteries to the cell voltage checker.  

439,-

469,-

KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png