Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Crawler motor & regulator / Børsteløs/Brushless / Tekin motor/esc / Tekin 2600 ROC 412 Brushless Crawler 3100kV Motor

Tekin 2600 ROC 412 Brushless Crawler 3100kV Motor

Art.nr: 2600

1.690,-

Tekin

Tekin
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Tekin Redline ROC 412
3100kV 1.5Y Turn Brushless Sensored Crawler Motor.

FEATURES

Four pole twelve slot high torque design
CNC machined 6061 T6 billet aluminum heat sink can
Dual plug sensor wire harness for use with all sensored and
sensorless systems
High purity copper windings
Anodized endbell plate for corrosion and wear resistance

INCLUDES

Tekin Redline ROC 412 3100kV 1.5Y Crawler Motor with Sensor Wire

SPECIFICATIONS

Motor Length: 2.1" (52.9mm)
Motor Diameter: 1.4" (35.8mm)
Shaft Dimensions: .60 x .125" (15.3 x 3.18mm)
Weight: 6.3oz (180g)

Produsent

Tekin

Tekin

Kunder kjøpte også

Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

KJØP
-10%
Hovedbilde DynoMAX 9573B Connector Bullet 4mm 10pair Hovedbilde DynoMAX 9573B Connector Bullet 4mm 10pair
DynoMAX 9573B Connector Bullet 4mm 10pair
  Male Bullet Specs: Bullet Male Connector Diameter: 4mm Bullet Male Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm Female Bullet Specs: Bullet Connector Female Diameter: 4mm Bullet Connector Female Depth: 15mm Total Length: 20.5mm Max Wire Diameter: 3.9mm Outer Diameter: 4.75 mm

129,-

KJØP
Hovedbilde RC4WD 0407 12mm Mini Hex Wheel Widener Set (+15mm)
RC4WD 0407 12mm Mini Hex Wheel Widener Set (+15mm)
 This is a package of RC4WD Mini 12mm Wheel Wideners. FEATURES: Widens each side of truck by (15mm)           CNC machined aluminum construction           Stainless steel mini barrel nut           Compatible with any 12mm hex wheels such as those used on the             Tamiya  F-350, Tundra, Jeep, Axial AX10, Losi Crawler, RC4WD             Timberwolf and Bully   INCLUDES: Four RC4WD Mini 12mm Wheel Wideners           Four Barrel Nuts           Eight Washers   Specifications: CNC Machined Widener Stainless Steel mini Barrel Nut Widen 15mm each side of the Truck OD: 0.51 in / 13 mm Width: 0.04 in / 1.1 mm Internal Diameter: 0.24 in / 6.2 mm

399,-

KJØP
Hovedbilde Hudy 190005 Limited Edition Tool Set w/Carrying Bag Hovedbilde Hudy 190005 Limited Edition Tool Set w/Carrying Bag
Hudy 190005 Limited Edition Tool Set w/Carrying Bag
      Complete HUDY Limited Edition R/C Tool Set features all necessary hand tools for all types and scales of R/C cars, along with a premium-quality exclusive tool bag with a super-modern look with cool, stylish and full-color graphics around the bag. High-quality European materials and craftsmanship are in abundance. Ideal size for carrying your RC tools and accessories; holds up to 30 tools. Super-strong stretchy Xylan™ holds the tools and will keep its stretchability for a long time. The inside walls feature a strong plastic sheet sewn for reinforcement, ensuring that even when the bag is fully loaded with tools it will not twist or bend. A heavy-duty lockable zipper is included, as well as a strong yet super-soft spongy handle for comfortable handling.  

3.595,-

3.795,-

Ikke på lager
-5%
Hovedbilde Castle Creations Wire 60
Castle Creations Wire 60" 13 AWG White
This is the Castle Creations 60" section of 13 AWG Wire with White Insulation. FEATURES Ideal for speed controls, motors and batteries INCLUDES 60" section of 13 AWG Wire with White Insulation SPECIFICATIONS Length: 60" (1.52m) Wire Gauge: 13 AWG

129,-

KJØP
Hovedbilde Castle Creations Wire 60
Castle Creations Wire 60" 13 AWG Black
This is the Castle Creations 60" section of 13 AWG Wire with Black Insulation FEATURES Ideal for speed controls, motors and batteries INCLUDES 60" section of 13 AWG Wire with Black Insulation SPECIFICATIONS Length: 60" (1.52m) Wire Gauge: 13 AWG

139,-

KJØP
Hovedbilde Castle Creations Wire 60
Castle Creations Wire 60" 13 AWG Red
This is the Castle Creations 60" section of 13 AWG Wire with Red Insulation. FEATURES Ideal for speed controls, motors and batteries INCLUDES 60" section of 13 AWG Wire with Red Insulation SPECIFICATIONS Length: 60" (1.52m) Wire Gauge: 13 AWG

129,-

KJØP
Hovedbilde Traxxas 3642X Shoulder Screws Ultra Shocks (6)
Traxxas 3642X Shoulder Screws Ultra Shocks (6)
These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS:    Length: 12mm           Diameter: 3mm    

39,-

Ikke på lager
Hovedbilde Traxxas 4957R Progressive Rate Shock Springs T-Maxx ...
Traxxas 4957R Progressive Rate Shock Springs T-Maxx ...
  This is a package of Progressive Rate Shock Springs from Traxxas                for use with the Traxxas Ultra Shocks set only.         These may be used on either the front or rear of the T-Maxx 3.3. FEATURES: Steel construction           White in color           Under light duty driving the progressive rate springs soak up small             bumps.As the jumps get bigger these springs get firmer the more             the suspension is compressed.   INCLUDES: Four white progressive rate front or rear shock springs           One instruction sheet   REQUIRES: Ultra shocks from Traxxas   SPECS:    Length: 3" (76.2mm)    

99,-

KJØP
Hovedbilde Traxxas 2428 12T 48P Pinion Gear/Set Screw
Traxxas 2428 12T 48P Pinion Gear/Set Screw
 This is the 12T 48P Pinion Gear for the               Telluride Off-Road Vehicle from Traxxas FEATURES: Hardened steel construction   INCLUDES: 12T 48P Pinion Gear with Set Screw

39,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png