Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Tamiya El-Biler / 58346 The Grasshopper / Tamiya B Parts 58346

Tamiya B Parts 58346

Art.nr: 0005069

219,-

Tamiya

Tamiya
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Tamiya Gearbox assembly for the Grasshopper


FEATURES: Black plastic construction


INCLUDES: Gearbox assembly


REQUIRES: Tamiya Grasshopper

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Hovedbilde Tamiya 51406 Sand Scorcher 2010 White Body Set Hovedbilde Tamiya 51406 Sand Scorcher 2010 White Body Set
Tamiya 51406 Sand Scorcher 2010 White Body Set
RC BODY SET SAND SCORCHER 2010 This is the R/C 1/10 Scale Racing Buggy Sand Scorcher Body Parts Set from Tamiya. FEATURES: Molded white plastic construction Separately-molded parts for windows, driver, exhausts and side mirrors INCLUDES: One Sand Scorcher Body Parts Set One Decal Set REQUIRES: Installation on the vehicle SPECS:    Length: 337mm (13.3") Width: 185mm (7.3") Height: 125mm (4.9") COMMENTS: Fits the Sand Scorcher (2010) Chassis Can be used on the Buggy Champ Chassis if used with Sand Scorcher (2010) front posts

699,-

799,-

KJØP
-13%
Hovedbilde Vapex NiMH Battery 7,2V 3000mAh Tamiya connector
Vapex NiMH Battery 7,2V 3000mAh Tamiya connector
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
Hovedbilde Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit Hovedbilde Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit
Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit
TAMIYA RC NEO FIGHTER BUGGY The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers! DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material Plastic Chassis Type DT-03 Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Included Led Light Buckets no Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction damper Special Feature 1 Monocoque DT-03 chassis Special Feature 2 Utilizes a longitudinally-placed rear motor, rear-wheel drive set-up. Special Feature 3 Long wheelbase design enables stable performance. Special Feature 4 The angle of the skid-shaped underside has been increased to raise the car?s off-road potential. Special Feature 5 Features a newly-designed body molded in tough polycarbonate material. Special Feature 6 Includes a torque-tuned motor and CVA shock units. Special Feature 7 Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors) Suspension Fully Independent Double Wishbone Terrain Use Off-Road Required To Complete: 2-channel radio steering servo 7.2volt battery battery charger Tamiya PS paint.

1.595,-

1.795,-

Ikke på lager
-11%
Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear
Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear
Savox SC-0254MGPLUS - Standard Sized Digital Servo with Soft Start 0.14sec 7.2kg/cm @ 6V The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Higher torque output than standard servos Ideal for 30-60 size aircraft, and some car applications Leading edge digital servo technology Strong 3-Pole Brushed motor Accurate and fast response Fine resolution Composite case Ball bearings Specifications: Torque @ 4.8v: 6.9kg/cm Torque @ 6v: 7.2kg/cm Speed @ 4.8v: 0.19s/60deg Speed @ 6v: 0.14s/60deg Dimensions: L40.7 x W20 x H39.4mm Weight: 49g Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V Idle Current: 6mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

389,-

419,-

KJØP
-7%
Hovedbilde Flysky FS-GT2B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT2B 2.4GHZ Transmitter
Flysky FS-GT2B 2.4GHZ Transmitter
FLYSKY GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries! Features: • Reliable, interference free 2.4GHz AFHDS signal operation • 3CH operation • Rechargeable li-ion transmitter battery • Interchangeable rubber hand grips • Adjustable steering dual-rate • Servo reversing Transmitter Specs: Model: Car/Boat RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Low Voltage Warning: Yes Charge Port: Yes (USB- charge cable included) Power: 3.7V 800mAh li-ion (included) Weight: 270g Receiver Specs: Model: Car/Boat RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Failsafe: Yes Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 5g Antenna Length: 26mm Dimensions: 37.6 x 22.3 x 13mm Includes: FS-GT2B transmitter FS-GT2B 3CH receiver 3.7V li-ion rechargeable battery pack Optional second rubber hand grip Antenna tube USB charge cable Bind plug User manual

579,-

699,-

KJØP
-17%
Hovedbilde Tamiya 9465653 Screw Bag A
Tamiya 9465653 Screw Bag A
   This is Screw Bag A for the Tamiya Grasshopper FEATURES: Screws feature steel construction INCLUDES: Eleven 2x8mm phillips head screws, silver in color           Twelve 2x10mm phillips head screws, silver in color           Two 2.5x5mm phillips head screws, black in color           One 3x11mm step pin, silver in color           Nine 3.25x6.75mm flat washers, silver in color           Twenty one 2mm nuts, silver in color           Two 3mm nuts, silver in color REQUIRES: Installation following the model manual COMMENTS: Consult your building manual for screw locations

69,-

79,-

Ikke på lager
-13%
Hovedbilde Tamiya 19404451 Snap Pin Bag
Tamiya 19404451 Snap Pin Bag
Denne er erstattet av Tamiya 50197 Snap Pin Bag

39,-

KJØP
Hovedbilde Tamiya 19805081 Treaded Rear Tires Grasshopper (2)
Tamiya 19805081 Treaded Rear Tires Grasshopper (2)
This is a pair of Rear Treaded Tires for the Tamiya Grasshopper. FEATURES: Rubber, all-terrain treaded tires INCLUDES: One pair of Rear Tires for the Tamiya Grasshopper REQUIRES: Tire glue. SPECS:    Width: 1.5" (38mm)           Outside Diameter: 3.1" (79mm)           Inside Diameter: 1.5" (38mm) COMMENTS: If front tires are needed, order 9805033

109,-

KJØP
Hovedbilde Tamiya 9805033 Ribbed Front Tires Hornet (2)
Tamiya 9805033 Ribbed Front Tires Hornet (2)
Tamiya 9805033 Ribbed Front Tires Hornet (2)  This is a pair of Front Tires from Tamiya for use on the Tamiya Hornet Buggy, and other tamiya cars. FEATURES: Direct replacement parts Ribbed black rubber INCLUDES: Two front ribbed buggy tires REQUIRES: Gluing tires to wheels SPECS:    Inner Diameter: 1.4"  (35mm) Outer Diameter: 2.85" (72mm) Width overall:   .80" (20.34mm)

99,-

KJØP
Hovedbilde Tamiya 0445007 Bumper 58045/74
Tamiya 0445007 Bumper 58045/74
This is Tamiya replacement Bumper that comes included with the #58045 and #58074 Grasshopper II. FEATURES: direct replacement fit, made of black molded           plastic and helps protect vehicle from damage                       . INCLUDES:  1   bumper SPECIFICATIONS:  7" long

59,-

Ikke på lager
Hovedbilde Tamiya 0335050 Chassis 58045
Tamiya 0335050 Chassis 58045
This is the Chassis for the Tamiya Grasshopper II buggy. FEATURES: Plastic construction           Black in color           Tub design INCLUDES: One chassis REQUIRES: Assembly to chassis SPECS:    Length:   11.5" (292mm)           Width:     3.5" (89mm) COMMENTS: Will fit other vehicles that are based on the Grashopper II.

199,-

Ikke på lager
Hovedbilde Tamiya 0555066 F Parts 58016
Tamiya 0555066 F Parts 58016
This is a set of Front Wheels for use on the Tamiya Hornet Buggy and other cars. FEATURES: Direct replacement parts           White nylon construction INCLUDES: Two three piece five spoke front wheels REQUIRES: Assembling wheels with four 2x8mm screws and four 2mm nuts           Gluing tires to wheels. SPECS:    Inner Diameter: 1.3"  (33mm)           Width overall:   .8" (20.34mm)  

109,-

KJØP
Hovedbilde Tamiya 0555067 R Parts 58016
Tamiya 0555067 R Parts 58016
This is a set of Rear Wheels for use on the Tamiya Hornet Buggy and other cars. FEATURES: Direct replacement parts           White nylon construction INCLUDES: Two three piece five spoke rear wheels REQUIRES: Assembling wheels with four 2x10mm screws and four 2mm nuts           Gluing tires to wheels. SPECS:    Inner Diameter: 1.4" (35mm)           Width: 1.75" (45mm)

185,-

195,-

KJØP
-5%
Hovedbilde Tamiya 74005 Curved Scissors 5-1/2
Tamiya 74005 Curved Scissors 5-1/2"
This is the Tamiya Curved Tip, Lexan Plastic Body Scissors. FEATURES: Curved tip specially designed to cut polycarbonate bodies used             on radio controlled vehicles.  These can also be used for airplane             canopies, helicopter windshields and other plastics.           Black plastic handle for comfort and control.           Stainless steel cutting blades. INCLUDES: One pair of Body Scissors SPECS:    Blade Cutting Area: 1" (25mm) approximately           Overall Length: 5-1/2" (140mm) approximately

199,-

Ikke på lager

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png