Hopp til innhold

Tamiya 0445007 Bumper 58045/74

Art.nr: 0445007

59,-

Tamiya

Tamiya

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is Tamiya replacement Bumper that comes included with
the #58045 and #58074 Grasshopper II.

FEATURES: direct replacement fit, made of black molded
          plastic and helps protect vehicle from damage                       .
INCLUDES:  1   bumper


SPECIFICATIONS:  7" long

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Knastedekk til blant annet DF-02, TT-02B, DT-02 og DT-03 chassis.   Fra produsenten: ★Replace parts in a timely fashion to ensure that your car runs at peak performance. Compatible Chassis DF-02, TT-02B, DT-02 & DT-03 Chassis Compatible wheels: Item 51206, Item 51262 and Item 53728. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

139,-

KJØP
Tamiya Front and Rear Lower Arms D Parts For DT02 DT03

65,-

KJØP
Skruesett som passer flere tamiya modeller. Laget for Grasshopper – 58346 ● Tamiya Grasshopper (2005, 2015, 2017 Editions) ● Tamiya Hornet (1984, 2004, 2012 Editions) ● Tamiya Mitsubishi Pajero (1984 Edition)

59,-

KJØP
Left & Right Uprights For 57501 and 58587   May be used in other cars as well, please check your manual.

99,-

KJØP
This is an optional Axial Transmission Spur Gear Cover, and is intended for use with the Axial SCX10 and AX10 Scorpion vehicles. Features: Fits all Axial SCX10 and AX10 transmissions Helps Keep dirt and debris out of your pinion and spur gear for a quiet, efficient drive train Installs in minutes using existing hardware

99,-

KJØP
Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.

119,-

KJØP
This is a 180ml Can of White Fine Surface Primer from Tamiya. FEATURES: Spray type primer specially developed for model finishing.           Use on metal and plastic.           The fine particle of the primer ensures a smooth finish after             application.           White color is ideal as a base coat for bright colors. INCLUDES: One 180ml Can of White Fine Surface Primer. SPECS:    180ml

139,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-17 Metallic Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Haze Grey Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Upright: 58124/093/082/074 OBS: Kun en stykk i pakken.   This is Tamiya Grasshopper II Upright White.

49,-

KJØP
This is a set of large and small snap pins(body clips) for any car or truck kit. FEATURES:  They are dark colored so may be easily lost in the dirt or on a            carpet track.  The small ones are straight so they may be sort of            difficult to grip, but the large ones are bent upward and they have            a large loop which makes them easy to grip. INCLUDES:  5- small snap pins(body clips)           10- large snap pins(body clips)

45,-

KJØP
The Tamiya RS-540 sport tuned motor is an economical high performance motor for on- and off-road vehicles.  It will work in many Tamiya vehicles (check instruction manual for applicability). Features: 6-8.4V (5-7 cells) usable voltage range           18,300 rpm at best efficiency           350 g-cm torque at 18,300 rpm           peak rpm: 21,000           peak current draw 50+ amps           1/8" motor shaft           2" motor leads with bullet connectors already installed Motor : 23 turn Includes: (1) motor Requires: Nothing else required

309,-

329,-

KJØP
-6%
This is the Sticker (Decal) Sheet for the Tamiya Grasshopper     FEATURES Full color vinyl decals precut for easy peel and stick application  All body accents and sponsor logos   INCLUDES Sticker (Decal) Sheet for the Tamiya Grasshopper

159,-

KJØP
This is the replacement Body for the Tamiya Grasshopper. FEATURES: Hard plastic construction, white in color INCLUDES: One body REQUIRES: Painting and installation following the kit manual SPECS:    Length: 13.25" (336mm)           Width:  6.25" (159mm)           Height: 3" (76mm)

299,-

329,-

Ikke på lager
-9%
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
This is the electric powered, radio controlled, 1/10 scale                  Tamiya Super Hot Shot Off-Road Buggy Kit. FEATURES: Chassis: ABS monocoque frame with plastic roll bar           Drive: Four wheel shaft drive           Motor: 25-T brushed with 13T pinion gear           Electronic Speed Control: Not incl.           Suspension: Four wheel independent double wishbone           Shocks: CVA, oil filled           Gearboxes: Enclosed           Bumper: Front, resin construction           Ball Bearings: Full set           Body: Clear polycarbonate           Tires: Pin spike 3.3" (83mm) diameter, front width 1.1" (29mm),             rear width 1.4" (36mm)           Wheels: One sets, gold plated plastic              Dimensions for both sets of wheels; 0.94" (24mm) wide front, 1.2"             (30mm) wide rear, 2.05" (52mm) diameter front and rear           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Camber: Non-adjustable INCLUDES: Tamiya Super Hot Shot Off-Road Buggy Kit with Motor, Tires,             Wheels, Body, Rear Wing, Decals and Instructions REQUIRES: Radio: 2-channel with high torque steering servo and esc.           Battery: 6-cell 7.2V stick pack           Battery Charger: To match selected battery           Building and track equipment SPECS:      Vehicle-           Length: 15.3" (390mm)           Width:   9.2" (235mm)           Height:  5.9" (150mm)

2.995,-

3.895,-

KJØP
-23%
RC BODY SET SAND SCORCHER 2010 This is the R/C 1/10 Scale Racing Buggy Sand Scorcher Body Parts Set from Tamiya. FEATURES: Molded white plastic construction Separately-molded parts for windows, driver, exhausts and side mirrors INCLUDES: One Sand Scorcher Body Parts Set One Decal Set REQUIRES: Installation on the vehicle SPECS:    Length: 337mm (13.3") Width: 185mm (7.3") Height: 125mm (4.9") COMMENTS: Fits the Sand Scorcher (2010) Chassis Can be used on the Buggy Champ Chassis if used with Sand Scorcher (2010) front posts

699,-

799,-

KJØP
-13%
Relive the good old days of 32 pitch gears, 3-piece wheels and kits     you build yourself with the Tamiya 1/10 Scale Frog 2WD Off Road Racer.                   This is a model kit and must be assembled! FEATURES: Chassis: ABS resin space           Drive: Two wheel rear drive           Motor: Mabuchi RS540SH stock motor with attached bullet connectors           Bearings: Four 5x11 bearings in the gearbox and 5x11 plastic busings            in the rear axle carriers and front wheels           Shocks: Two rear horizontal mounted, aluminum body, oil-filled           Body: Clear Lexan buggy type with clear rear wing           Gearbox: 4 gear diff (pinion drives spur, spur drives drive gear,            drive gear drives diff gear)           Differential: Plastic bevel gear type           Transmission: Single speed           Speed control: Without ESC           Pinion gears: 16 tooth, 18 tooth and 19 tooth included           Wheels: 1.4" front, 1.6" rear, realistic 3-piece, white in color           Tires:  Ribbed racing front, high-grip rear spiked           Bumpers: Front plastic           Suspension: Inboard spring type front suspension           Camber Tie Rods: non adjustable           Steering Tie Rods: adjustable           Steering: Steering rods attach to servo saver and knuckle arms           Servo Saver: Included           Driveshafts: re-designed dog bone style with rubber boots INCLUDES: Tamiya Frog Buggy w/two horizontal mounted friction type rear shocks,             540 size motor,  body, tires, wheels front bumper, 16, 18, and 19             tooth pinion gears, 49, 50, and 52 tooth spur gears, without ESC, decals and building instructions REQUIRES: Radio: 2-channel radio with one standard servo.            Battery: 6 flat pack with standard connector           Charger: AC/DC timed or peak for 6-cell battery           Misc. Items: Paint for body SPECS:       CHASSIS-            Length: 16.1" (410mm)            Width:   9.4" (240mm) at rear wheels, widest point            Height:  5.7" (145mm)            Weight: 2.2lbs (1020g)            Wheelbase: 9.8" (250mm)            Tread: Front and Rear 7.3" (185mm) wheels on-center side-to-side            Track: Front and Rear 8" (203mm)            Tires, Front 2.9" (73mm) diameter .79" (20mm)                   Rear  3.4" (86mm) diameter 1.6" (42mm) wide              BODY-            Length:  12" (304mm)            Width:    2"  (51mm) at front wheels, narrowest point            Width:  3.8"  (98mm) behind rear wheels, widest point            Height: 2.4"  (61mm)

2.195,-

2.295,-

KJØP
-4%
This is the Tamiya Curved Tip, Lexan Plastic Body Scissors. FEATURES: Curved tip specially designed to cut polycarbonate bodies used             on radio controlled vehicles.  These can also be used for airplane             canopies, helicopter windshields and other plastics.           Black plastic handle for comfort and control.           Stainless steel cutting blades. INCLUDES: One pair of Body Scissors SPECS:    Blade Cutting Area: 1" (25mm) approximately           Overall Length: 5-1/2" (140mm) approximately

199,-

Ikke på lager
This is the Tamiya Gearbox assembly for the Grasshopper FEATURES: Black plastic construction INCLUDES: Gearbox assembly REQUIRES: Tamiya Grasshopper

219,-

Ikke på lager
This is the Chassis for the Tamiya Grasshopper II buggy. FEATURES: Plastic construction           Black in color           Tub design INCLUDES: One chassis REQUIRES: Assembly to chassis SPECS:    Length:   11.5" (292mm)           Width:     3.5" (89mm) COMMENTS: Will fit other vehicles that are based on the Grashopper II.

199,-

Ikke på lager
This is a pair of Rear Treaded Tires for the Tamiya Grasshopper. FEATURES: Rubber, all-terrain treaded tires INCLUDES: One pair of Rear Tires for the Tamiya Grasshopper REQUIRES: Tire glue. SPECS:    Width: 1.5" (38mm)           Outside Diameter: 3.1" (79mm)           Inside Diameter: 1.5" (38mm) COMMENTS: If front tires are needed, order 9805033

109,-

KJØP
This is a set of Rear Wheels for use on the Tamiya Hornet Buggy and other cars. FEATURES: Direct replacement parts           White nylon construction INCLUDES: Two three piece five spoke rear wheels REQUIRES: Assembling wheels with four 2x10mm screws and four 2mm nuts           Gluing tires to wheels. SPECS:    Inner Diameter: 1.4" (35mm)           Width: 1.75" (45mm)

185,-

195,-

KJØP
-5%
This is a set of Front Wheels for use on the Tamiya Hornet Buggy and other cars. FEATURES: Direct replacement parts           White nylon construction INCLUDES: Two three piece five spoke front wheels REQUIRES: Assembling wheels with four 2x8mm screws and four 2mm nuts           Gluing tires to wheels. SPECS:    Inner Diameter: 1.3"  (33mm)           Width overall:   .8" (20.34mm)  

109,-

KJØP
  Zinc Plated Steel - INCLUDES - 38 - 3mm x 12mm Self Tapping Screws 2 - 3 x 22 Screw pins 1 - 5 x 30 Shaft  

49,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png