Hopp til innhold
-7%

Tamiya 58602 RC Mitsubishi Pajero Rally CC-01 KIT

Art.nr: 58602

2.695,-

2.895,-

- 7%
Tamiya

Tamiya

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 1/10 scale electric powered, radio controlled, 4WD
Mitsubishi Pajero Rally Off-Road Kit from Tamiya.

FEATURES

Chassis: CC-01, plastic tub construction
Drive: Four wheel drive, shaft driven
Motor: 540 brushed electric motor
Electronic Speed Control: TBLE-02S
Shocks: Oil-filled, black plastic bodies
Gearbox: Front and rear sealed gearbox
Differentials: Live axle
Transmission: Single speed
Body: Clear molded polycarbonate
Tires: Semi-pneumatic all-terrain block pattern 1.2" (30mm)
wide, 3.5" (90mm) diameter
Wheels: Five spoke plastic, silver in color 1" (26mm) wide,
1.9" (48mm) diameter
Bumper: Front, plastic construction, black in color
Suspension: Front, independent
Rear, solid axle
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type with servo saver and adjustable linkage

INCLUDES

Mitsubishi Pajero Rally with oil-filled shocks, 540 motor, ESC,
clear body, tires, wheels, shock oil, 16 tooth pinion gear, spur
gear, instructions

REQUIREMENTS

Radio: 2-Channel with high-torque steering servo
Eight AA batteries for transmitter
Battery: 6-cell stick pack w/ standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 16.8" (426mm)
Width: 7.7" (195mm)
Height: 8.5" (215mm)
Weight: 53.3oz (1510g)
Wheelbase: 9.9" (252mm)
BODY-
Length: 15.5" (394mm)
Width: 7.2" (184mm)
Height: 5.2" (132mm)

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

G Parts Bag for 58132 Might fit other CC-01 models as well, please refer to your manual.

119,-

KJØP
Yeah Racing RC Ball Bearing Set with Bearing Oil For Tamiya CC-01 Chassis #YB0129MX   Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specification: Metal Bearing For Tamiya CC-01 Chassis #YB0129MX Material: Metal   Include: Bearing Oil (15ml) #YA-0215 1Pc 6011M(5x8x2.5mm) X 3 Pcs 6014M(5x11x4mm) X 11 Pcs 6016M(6x12x4mm) X 2 Pcs 6023M(10x15x4mm) X 2 Pcs

169,-

KJØP
Yeah Racing Aluminum Bearing Supported Steering Rack Blue For Tamiya CC01 Description: Remove the excess play found in the original steering rack and increase smoothness with this bearing supported steering rack!   Features: For: Tamiya CC01 Material: Aluminum Color: Blue   Includes: Steering Arm A (1 pc) Steering Arm B (1 pc) Steering Arm C (1 pc) Steering Bridge (1 pc) Steering Mount Post (1 pc) Round Head Screw M3 x 6mm (2 pcs) Round Head Screw M3 x 8mm (2 pcs) Round Head Screw M3 x 12mm (1 pc) Ball Stud 4.8 x 5mm (4 pcs) Ball End 4.8mm (4 pcs) Turnbuckle M3 x 28mm (2 pcs) Flanged Ball Bearing 3 x 6 x 2.5mm (2 pcs) Flanged Ball Bearing 3 x 8 x 3mm (2 pcs) Flanged Ball Bearing 5 x 9 x 3mm (1 pc) Ball Bearing 5 x 8 x 2.5mm (1 pc) Bearing Holder (1 pc)

289,-

KJØP
Yeah Racing Aluminum Steering Knuckle Blue For Tamiya CC01 Blue Description: Aluminum steering knuckles provides an increased strength over the original plastic pieces. Comes with ball bearings which ensures full drivetrain efficency!   Features: For: Tamiya CC01 Color: Blue Material: Aluminum   Includes: Front Steering Knuckles (2 pcs) Ball bearing (4 pcs)

199,-

KJØP
Yeah Racing Aluminum Front Lower Suspension Arm Blue For Tamiya CC01 Description: Direct aluminum upgrade for your Tamiya CC01, increased strength over stock plastic items! Suspension pins are secured in place with e-clips. Feature: For: Tamiya CC01 Material: Aluminum Color: Blue *Photos for reference only. Include: Front Lower Suspension Arm (2 pcs) Pin 42mm (2 pcs) Pin 27mm (2 pcs) E-Clip (8 pcs) Step Screw (2 pcs) Manual:

189,-

209,-

KJØP
-10%
This is the Tamiya 25 Turn RS-540 Torque Tuned Brushed Motor. FEATURES: Ideal upgrade for 1/10 scale RTR Tamiya electric vehicles           May be used in official Tamiya races INCLUDES: Tamiya 25 Turn RS-540 Torque Tuned Motor with presoldered Leads and            3.5mm Male Bullet Connectors SPECS:    Can Diameter: 1.4" (35.8mm)           Length: 2" (51mm)           Shaft Diameter: 0.12" (3mm)

199,-

KJØP
   This is Tamiya Color Spray Lacquer for Polycarbonate (PS-3 Light Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
En fantastisk maskeringsfilm som tillater å maskere kurver!   Denne er helt utrolig og må bare prøves.   Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively. Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

69,-

KJØP
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
RC VOLKSWAGEN AMAROK This is the 1/10 scale electric powered, radio controlled, 4WD Volkswagen Amarok Off-Road Kit from Tamiya. Features: Chassis: CC-01, plastic tub construction  Drive: Four wheel drive, shaft driven  Motor: 540 size brushed electric motor  Electronic Speed Control: TBLE-02S  Shocks: Oil-filled, CVA black plastic construction  Gearbox: Front and rear sealed gearbox  Differentials: Planetary gear  Transmission: Single speed  Tires: Semi-pneumatic radial pattern, rubber construction  Wheels: One-piece  Body: Polycarbonate  Bumper: Front, plastic construction, black in color  Suspension: Front, independent - Rear, four link solid axle  Camber Tie Rods: Fixed non-adjustable  Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in     relation to the  Steering: Bell-crank type with servo saver and adjustable linkage Includes: Tamiya VW Amarok kit with oil-filled shocks 540 motor ESC clear body tires wheels shock oil 16 tooth pinion gear spur gear instructions Requirments:  Radio: 2-Channel with 1 Servo  Eight AA batteries for transmitter  Battery: 7.2V 6-cell stick pack w/ standard connector  Charger: AC/DC timed or peak for 6-cell battery  Misc. Items: Building and track equipment Specifications:  Length: 16.8" (426mm)  Width: 7.7" (195mm)  Height: 8.5" (215mm)  Weight: 53.3oz (1510g)  Wheelbase: 9.9" (252mm)  BODY-  Length: 18.1" (460mm)  Width: 7.25" (184mm)  Height: 5" (127mm) Comments: To paint body to match color scheme on box, order the following  Tamiya colors;  PS-5 Black PS-31 Smoke  PS-14 Copper TS-29 Semi Gloss Black  X-34 Metallic Brown

2.995,-

4WD CC-01 Bearing Set (18 Pcs)

299,-

KJØP
En rimelig men en lader med høy kvalitet. Meget nøyaktig ballansering av LIxx batterier, og meget stabil i ladestrømmen. Den er mikroprosessor styrt, som gjør at den blir meget nøyaktig, også på Delta peak cut off for NiMh og NiCd. 12V + 220V inngangspenning gjør at den er fleksibel. Gjør seg like gjerne på feltet som å hobbyrommet. Funksjoner: * Mikroprosessorstyrt Delta-peak-følsomhet. * Individuell cellebalansering for Li-ion, LiPo og LiFe-kompatibel samt Ni-Cd og NiMH-kompatibel * Stort utvalg av ladestrømmer Lagringsfunksjon, og har optimalisert lagrings program * Tidsbegrensningsfunksjon – for optimal sikkerhet. * Overvåking av inngangsspenning. (Beskytter bilbatterier på feltet) * Datalagring (Lagre opptil 5 pakker i minnet) * Vedlikehold og cycling av batterier * Støtte ny generasjon 123 system (LiFe) batteri Spesifikasjoner: * Driftsspenningsområde: DC11.0-18.0V / AC til DC-adapter (DC11.0-18.0V / 5A) * Kretseffekt: Maks. ladeeffekt 50W / Maks. utladningseffekt 5W Ladestrømområde: .1 ~ 5.0A * Utladningsstrømområde: 0,1-1,0A * Strømavløp for balansering av Li-po: 300mAH / celle * LiIon / LiPo / Livsceller: 1-6 * NiCd / NiMH-celler: 1-15 * Pb batterispenning: 2 ~ 20v * Enhetspakke bruttovekt: 580g * Dimensjoner: 133x87x33mm I pakken: 1 x IMAX B6 AC 50W 1 x strømadapter 1 x ladekabel (XT60, Hitec / JR / Futaba, BEC, Krokodille klemmer, Glow Driver kontakt

749,-

799,-

KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png