Hopp til innhold

Tamiya 58616 1/10 Volkswagen Amarok CC-01 4WD Kit

Art.nr: 58616

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RC VOLKSWAGEN AMAROK

This is the 1/10 scale electric powered, radio controlled, 4WD Volkswagen Amarok Off-Road Kit from Tamiya.

Features:

  • Chassis: CC-01, plastic tub construction
  •  Drive: Four wheel drive, shaft driven
  •  Motor: 540 size brushed electric motor
  •  Electronic Speed Control: TBLE-02S
  •  Shocks: Oil-filled, CVA black plastic construction
  •  Gearbox: Front and rear sealed gearbox
  •  Differentials: Planetary gear
  •  Transmission: Single speed
  •  Tires: Semi-pneumatic radial pattern, rubber construction
  •  Wheels: One-piece
  •  Body: Polycarbonate
  •  Bumper: Front, plastic construction, black in color
  •  Suspension: Front, independent - Rear, four link solid axle
  •  Camber Tie Rods: Fixed non-adjustable
  •  Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in     relation to the
  •  Steering: Bell-crank type with servo saver and adjustable linkage

Includes:

  • Tamiya VW Amarok kit with oil-filled shocks
  • 540 motor
  • ESC
  • clear body
  • tires
  • wheels
  • shock oil
  • 16 tooth pinion gear
  • spur gear
  • instructions

Requirments:

  •  Radio: 2-Channel with 1 Servo
  •  Eight AA batteries for transmitter
  •  Battery: 7.2V 6-cell stick pack w/ standard connector
  •  Charger: AC/DC timed or peak for 6-cell battery
  •  Misc. Items: Building and track equipment

Specifications:

  •  Length: 16.8" (426mm)
  •  Width: 7.7" (195mm)
  •  Height: 8.5" (215mm)
  •  Weight: 53.3oz (1510g)
  •  Wheelbase: 9.9" (252mm)
  •  BODY-
  •  Length: 18.1" (460mm)
  •  Width: 7.25" (184mm)
  •  Height: 5" (127mm)


Comments:

To paint body to match color scheme on box, order the following
 Tamiya colors;
 PS-5 Black PS-31 Smoke
 PS-14 Copper TS-29 Semi Gloss Black
 X-34 Metallic Brown

Produsent

"Utgått"

Relaterte produkter

 

Art.nr: 53068
Copied
The Tamiya RS-540 sport tuned motor is an economical high performance motor for on- and off-road vehicles.  It will work in many Tamiya vehicles (check instruction manual for applicability). Features: 6-8.4V (5-7 cells) usable voltage range           18,300 rpm at best efficiency           350 g-cm torque at 18,300 rpm           peak rpm: 21,000           peak current draw 50+ amps           1/8" motor shaft           2" motor leads with bullet connectors already installed Motor : 23 turn Includes: (1) motor Requires: Nothing else required

309,-

329,-

KJØP
-6%
Art.nr: 53444
Copied
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Medium Set: Green #500 Blue #600 Purple #700 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the humber, the higher the viscosity.

149,-

KJØP
Art.nr: 53445
Copied
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Hard Set: For race-tuned cars, rough surfaced circuits, etc Pink #800 Clear #900 Light Blue #1000 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the number, the higher the viscosity.

149,-

KJØP
Art.nr: 54179
Copied
Denne passer også til Bommerang.   This is the Ball Bearing Set for use on the Tamiya M-05 Chassis Vehicles. FEATURES: Steel construction           Shielded INCLUDES: Twelve 5x11x4mm Bearings           Six 5x8x2.5mm Bearings REQUIRES: Installation on the vehicle

299,-

KJØP
Art.nr: 100149-01
Copied
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Art.nr: B9700
Copied
Charge Lead Tamiya with 4mm banana plugs

69,-

KJØP
Art.nr: B9833
Copied
DynoMAX Connector Adapter XT60 (male) - Tamiya (male) This is an practical connector adapter for batteries with an XT60 connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with a Tamiya connector but you have an vehicle with a XT60 connector system.

39,-

KJØP
Art.nr: B9843
Copied
DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

KJØP
Art.nr: B9662
Copied
DynoMAX B9662 - Tamiya Charging Lead for Chargers with XT60 Output This is a charging lead for batteries with a Tamiya connector that fits the latest SkyRC chargers wthat are equipped with a XT60 male output connector. Specs: Battery Connector: Tamiya Charger Connector: XT60 Wires: 14AWG Length: 500mm

115,-

KJØP
Art.nr: B9533
Copied
Connector Tamiya Pair

25,-

35,-

KJØP
-29%
Art.nr: 86005
Copied
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Art.nr: 86031
Copied
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Art.nr: 86014
Copied
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-14 Copper).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Art.nr: 85029
Copied
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Semi-Gloss Black Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Art.nr: 81534
Copied
 This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Metallic Brown).                       For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number X-34 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Metallic Brown) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

39,-

KJØP

Kunder kjøpte også

SAVÖX SW-0231MG-PLUS - Water Proof Metal-Geared Standard-Sized Servo The SW-0231MG-PLUS is a budget friendly, waterproof, high torque, digital servo in a slightly taller case than most standard sizes. This is a great upgrade if your looking to drive your RC vehicle in any condition yet unable to use higher voltage to obtain more power. Features: New: Soft Start New: sanwa SSR compatible Strong metal gear train for added durability Waterproof case design (IP67) Ideal for cars, truck, and boats subject to water or snow Slightly taller case design Specifications: Torque @ 6V -20kg/cm Torque @ 7.4V - 25kg/cm Speed @ 6V - 0.17 sec/60 deg Speed @ 7.4V - 0.15 sec/60 deg Dimensions L x W x H: 41.8 x 20.2 x 42.9mm Weight: 66g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 100mA @4.8V, 120mA @6.0V Stall Current (at locked): 3800mA @4.8V, 4800mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

599,-

629,-

KJØP
-5%
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is the 1/10 scale electric powered, radio controlled, 4WD Mitsubishi Pajero Rally Off-Road Kit from Tamiya. FEATURES Chassis: CC-01, plastic tub construction Drive: Four wheel drive, shaft driven Motor: 540 brushed electric motor Electronic Speed Control: TBLE-02S Shocks: Oil-filled, black plastic bodies Gearbox: Front and rear sealed gearbox Differentials: Live axle Transmission: Single speed Body: Clear molded polycarbonate Tires: Semi-pneumatic all-terrain block pattern 1.2" (30mm) wide, 3.5" (90mm) diameter Wheels: Five spoke plastic, silver in color 1" (26mm) wide, 1.9" (48mm) diameter Bumper: Front, plastic construction, black in color Suspension: Front, independent Rear, solid axle Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver and adjustable linkage INCLUDES Mitsubishi Pajero Rally with oil-filled shocks, 540 motor, ESC, clear body, tires, wheels, shock oil, 16 tooth pinion gear, spur gear, instructions REQUIREMENTS Radio: 2-Channel with high-torque steering servo Eight AA batteries for transmitter Battery: 6-cell stick pack w/ standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment SPECIFICATIONS VEHICLE- Length: 16.8" (426mm) Width: 7.7" (195mm) Height: 8.5" (215mm) Weight: 53.3oz (1510g) Wheelbase: 9.9" (252mm) BODY- Length: 15.5" (394mm) Width: 7.2" (184mm) Height: 5.2" (132mm)

2.695,-

2.895,-

KJØP
-7%
4WD CC-01 Bearing Set (18 Pcs)

299,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png