Hopp til innhold
Hjem / Masse Diverse / RC4WD-produkter / RC4WD E0016 LED Basic Lightning System Mojave Body Set
-6%

RC4WD E0016 LED Basic Lightning System Mojave Body Set

Art.nr: E0016

329,-

349,-

- 6%
RC4WD

RC4WD
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the LED Basic Lighting System for the RC4WD Mojave Body Set.

 


FEATURES

White, amber, and red LEDs for headlight, tail light, parking light,
 and front and rear side marker lights
 Wire length sized to fit the Mojave body
 Additional wire extension allows easy removal of body from chassis
 Plugs into receiver for power

 


INCLUDES

Two 5mm White LEDs
 Two 3mm White LEDs
 Two 3mm Amber LEDs
 Six 3mm Red LEDs
 Wire Extension

Produsent

RC4WD

RC4WD

Kunder kjøpte også

Hovedbilde RC4WD S1478 Marlin Crawler Roll Bar for Mojave Body
RC4WD S1478 Marlin Crawler Roll Bar for Mojave Body
RC4WD Marlin Crawler Roll Bar for Mojave Body   This is now Licensed Marlin Crawler Roll Bar for Mojave Body. This has been Officially Licensed by the Marlin Crawler Inc and are only available from RC4WD and our Dealers.   Specifications: ABS Plastic Injection Molding Molded in Black Length: 5.90in / 150.0mm Width: 3.51in / 89.5mm Height: 3.63in / 92.2mm Weight: 1.41oz / 40g   What's Included: 1x RC4WD Marlin Crawler Roll Bar for Mojave Body 1x Marlin Crawler Decal Sheet   Optional Parts: RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084) RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (75mm/3") (Z-E0055)    Notes: Fits RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)   Marlin Crawler and the Turtle Logo are registered trademark of the Marlin Crawler Inc. The Marlin Crawler logos are property of Marlin Crawler Inc and used under license to RC4WD.

329,-

KJØP
Hovedbilde RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ... Hovedbilde RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ...
RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ...
Reverse Mount Spring Hanger Conversion Kit for TF2 and TF2 LWB     Specifications: Heavy Duty Stamped Steel Black Powder-coated Finish Total Weight: 0.36oz / 10.0g           Shown installed on RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) for example (Not Included)     Shown installed on RC4WD Trail Finder 2 Truck Kit "SWB" (Z-K0045) for example (Not Included)     Shown installed on RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) for example (Not Included)         What's Included: 2x Reverse Mount Spring Hanger Brackets 2x Flanged Brass Knuckle Bushings 4x Steel Leaf Spring Shackles 2x Brass Bushings 4x M3 x 14mm Steel Button Head Cap Screws (Black) 4x Nylock Nuts M3 (Black)   Replacement Hardware: Nylock Nuts M3 (Black) (Z-S0629) Steel Button Head Cap Screws M3 x 14mm (Z-S0655)   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058) Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)

299,-

319,-

KJØP
-6%
Hovedbilde RC4WD S0533 Scale Diamond Plate Aluminum Sheets (2) Hovedbilde RC4WD S0533 Scale Diamond Plate Aluminum Sheets (2)
RC4WD S0533 Scale Diamond Plate Aluminum Sheets (2)
This is a quantity of two RC4WD Scale Diamond Plate Aluminum Sheets. FEATURES Aluminum construction with polished natural finish May be used to construct tool boxes, step plates, rocker panel plates and much more   INCLUDES Two Scale Diamond Plate Aluminum Sheets   SPECIFICATIONS Length: 11" (280mm) Width: 8.7" (221mm) Thickness: 0.01" (0.5mm)

219,-

299,-

KJØP
-27%
Hovedbilde Tamiya 85033 Spray Lacquer TS-33 Dull Red 3 oz
Tamiya 85033 Spray Lacquer TS-33 Dull Red 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Hull Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 85031 Spray Lacquer TS-31 Bright Orange 3 oz
Tamiya 85031 Spray Lacquer TS-31 Bright Orange 3 oz
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Bright Orange Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Hovedbilde Traxxas 3934 Body Clips (12)
Traxxas 3934 Body Clips (12)
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

KJØP
Hovedbilde DynoMax B9503 Connector BEC (JST-RCY) Pair
DynoMax B9503 Connector BEC (JST-RCY) Pair
Connector BEC (JST-RCY) Pair

25,-

35,-

KJØP
-29%
Hovedbilde RC4WD S1560 Chevrolet Blazer Metal Emblem Set Hovedbilde RC4WD S1560 Chevrolet Blazer Metal Emblem Set
RC4WD S1560 Chevrolet Blazer Metal Emblem Set
RC4WD Chevrolet Blazer Metal Emblem Set   Specifications: Stainless Steel Thickness: 0.02in / 0.5mm Weight: 0.07oz / 2g   What's Included: 1x RC4WD Chevrolet Blazer Metal Emblem Set Optional Parts: RC4WD Chevrolet Blazer Main Body (Z-B0116) RC4WD Chevrolet Blazer Topper (Z-B0118) RC4WD Chevrolet Blazer Main Cab Clear Window Parts Tree (Z-B0114) RC4WD Chevrolet Blazer Chrome Grill and Bumper Parts Tree (Z-B0094) RC4WD Chevrolet Blazer Hood and Tailgate Parts Tree (Z-B0098) RC4WD Chevrolet Blazer Interior Panels Parts Tree (Z-B0102) RC4WD Chevrolet Blazer Chrome Handles and LED Holder Parts Tree (Z-B0104) RC4WD Chevrolet Blazer Clear Lenses Parts Tree (Z-B0096) RC4WD Chevrolet Blazer Seats, Steering Column Parts Tree (Z-B0100) RC4WD Chevrolet Blazer Accessory Parts Tree (Z-B0108) RC4WD Chevrolet Blazer Body Mounting Parts Tree (Z-B0112) RC4WD Chevrolet Blazer Topper Clear Window Parts Tree (Z-B0110) RC4WD Chevrolet Blazer Chrome Mirror and Rear Taillight Parts Assembly (Z-B0106) RC4WD Chevrolet Blazer Functional Hood and Tailgate Hardware (Z-S1564) RC4WD Magnet and Metal Mounts (Z-S1562) Notes: Fits RC4WD Chevrolet Blazer Hard Body Complete Set (Z-B0092)

139,-

KJØP
Hovedbilde Traxxas 8038 TRX-4 Blazer Light Kit Hovedbilde Traxxas 8038 TRX-4 Blazer Light Kit
Traxxas 8038 TRX-4 Blazer Light Kit
TRX-4 Blazer Light Kit - Ultimate Scale Looks and Rock-Solid Durability The Traxxas TRX-4 Chevrolet K5 Blazer delivers scale appearance and detail like never before. The new LED Light Kit (#8038) takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest adventures. No matter where the trail leads, day or night, the TRX-4 Chevrolet K5 Blazer will light the way.   QUICK FEATURES ON TRX-4 BLAZER LED LIGHT KIT (#8038) Sealed waterproof design High / low headlight setting Precision-engineered for direct fit on the Blazer body Plug and play design with modular connectors Traxxas LED lighting module Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Clear headlight lenses with reflectors, red tail lights, and amber side markers   Also Available (without a power module) LED Light Kit (#8039) The TRX-4 Blazer LED Light Kit uses the same #8028 Power Module as other TRX-4 light kits. The #8039 LED Light Kit provides a cost-effective solution to add lights to the TRX-4 Blazer by reusing the power module from previous installations. Rock Light Kit (#8026) Traxxas LED Rock Lights #8026 install directly into the inner fenders and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark.

649,-

699,-

KJØP
-7%
Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ... Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Aluminum & Brass Drop Hitch Receiver for Traxxas TRX-4   (Tilhengerfeste) Aluminum Drop Hitch receiver for Traxxas's TRX-4, use this to easily mount a trailer. Features three different offset holes for you to adjust the length which it sticks out the rear of your bumper. *Photos for reference only.   Feature: For: Traxxas TRX-4 Original Plastic Rear Bumper or YA-0549 Material: Aluminum & Brass Color: Silver   Include: Drop Hitch Receiver (1 pc) Set Screw (1 pc)

109,-

KJØP
Hovedbilde Traxxas 8026X LED Rock Light Kit TRX-6
Traxxas 8026X LED Rock Light Kit TRX-6
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directly into the inner fenders of compatible TRX-4® and TRX-6® trucks. Rock lights help illuminate obstacles underneath for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark.  Requires 8028 power supply and 8018, 8072, 8080 or 8080X inner fenders.

299,-

329,-

KJØP
-9%
Hovedbilde RC4WD K0049 1/10 Trail Finder 2 Kit w/Mojave II Hard ...
RC4WD K0049 1/10 Trail Finder 2 Kit w/Mojave II Hard ...
  Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow, or mud than the Trail Finder 2. Part scale truck, part adventurer, your TF2 is ready for your mud kicking trail-loving lifestyle! The TF2 has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2. Performance of the TF2 is smooth and with its 2 speed selectable transmission, 4WD drivetrain, bullet-proof transfer case and quality metal components throughout. The TF2 is truly a work of art in both appearance and performance. Every TF2 is compatible with a full range of option and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 offroad truck... The Trailfinder 2. Your adventure awaits....   Custom Designed for True-to-Scale Looks Realistic Billet Aluminum Ladder Frame Chassis 2 Speed Remote Selectable Transmission Center Mounted Realistic 4x4 Transfer Case Cast Metal Axles with Locked Differentials True to Scale Leaf Spring Suspension Highly Detailed Body with Dropped Bed and More 1.55 Stamped Steel Beadlock Wheels with Lug Nuts Super Grip High Performance Mud Thrasher Tires Realistic Tube Bumpers - Rock Rails - Skid Plate   All New Hammer Transfer Case Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears All New R3 2 Speed Transmission Ratios Pinion/spur 14/64 = 4.57:1 1st gear 3.47:1 2nd gear       1.27:1 Gears - Wide steel 32P, Delrin spur, slipper clutch, Features - Machined billet aluminum casing, scale looking, Motor mount can be rotated to 10 different positions, compatible with other brand spurs (Axial, Traxxas, Robinson) Cast Yota Axles Ratio: 15/40 = 2.67:1 Width at hex (using 4mm TF2 hexes): 176.5mm All New Trailfinder 2 Chassis Features - Billet aluminum constriction Adjustable shock hoops Driveshafts High quality plastic material, very durable High quality steel Yokes Wheels Name: 1.55 OEM beadlock wheels Hub:     12mm hex Width:    22mm Back spacing: 9mm Features: Stamped steel, aluminum hub, internal beadlock, very scale looking, 6 bolt pattern, Bumpers Tough Armor TF2 Winch front bumper Tough Armor TF2 Rear Bumper Tough Armor TF2 Side Sliders Authentic looking crawler style tube bumper. Very high quality flexible plastic, very durable, very scale. TF2 Truck Dimensions Wheels base: 287mm (11.3") Width: 215mm (8.5") Height: 210mm (8.25") Ground clearance: 57mm (2.5") Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1   DRIVETRAIN The TF2 includes the new Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and the same new 32P widened gears for durability. The most scale accurate axles on the market, the RC4WD Cast Yota axles feature innovative round knuckles, new lower mounting points and compact offset pumpkins. The All New R3 2 speed transmission comes with a fully machined billet aluminum case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch. The new designed motor mount is adjustable in 10 positions. Drawing on the success of the RC4WD MOA gear sets, the TF2 drivetrain has the most durable gears RC4WD has to offer so the TF2 will stay on the trail, day after day. The Driveshafts for the TF2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail. SUSPENSION The TF2 includes a set of RC4WD Ultimate Scale Shocks. Designed for ultimate scale looks and ultimate performance. Machined from billet aluminum, rebuildable and internally sprung. The TF2 includes a set of RC4WD White Stamped Steel 1.55 internal beadlock wheels. Super tough paintable white finish, aluminum internal ring and popular 6 lug design. The TF2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under cab electronics tray for multiple electronics mounting options. The All New TF2 Chassis is a machined billet alumi- num ladder frame design with leaf springs, scale shock hoops, chassis servo mounts and hard body mounts. 4-link conversion available soon! Every TF2 needs a tough set or rock grabbing tires and the included Mud Thrashers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.   DETAILS The TF2 Mojave body features new late model style square headlights, chrome bumpers and a redesigned shape of the classic 4x4 body style. More accurately proportioned and better details. Another industry first, the TF2 Mojave Body Set includes a bolt on, scale accurate molded cab back with every kit so you can use just the cab for a truggy style build. The Mojave Body Set includes add on windshield wipers, mirrors, marker light details and door handles for the ultimate in scale looks. These items are also easily replaceable if damaged. The TF2 Mojave Body Set includes an industry first dropped bed molded directly into the body. Perfect for carrying all you scale accessories or spare wheel and tire. The Trailfinder 2 kit also includes all new scale rock rails plus front and rear tube rock guard bumpers. The front bumper has a winch mount built right in for an optional RC4WD winch. What's Included: 1x Trail Finder 2 Truck Kit w/Mojave II Body Set This is a kit that requires building time (appro. 2-3 hours) and electronics. Notes: Taping the chrome parts may cause the chrome to lift off the parts. Required to Complete: Truck Kit Hex Drivers (1.5mm, 2mm, 2.5mm) Long Nose Pliers Associated Thread Locking Adhesive Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm) Body Kit Modeling / Craft Knife Body Reamer Side Cutters Instant glue / Plastic Cement (prefer non whitening) Hex Drivers (1.5mm, 2mm) Cross Phillips Screwdrivers (small)   Electronics Motor Electronic Speed Controller "ESC" Radio and Receiver (3 channel or more) 2x Standard Size Servo (Z-E0035) Battery (Consult your "ESC" manual) Charger (Consult your battery guide) Replacements Parts: Soft Steel Leaf Spring for Trail Finder 2 Hammer Transfer Case (1.47/1) Metal Drive Coupling for Trail Finder 2 Yota Steering Links for Trail Finder 2 Mojave Body Hardware Kit R3 Scale 2 Speed Transmission 14t 32p Hardened Steel Pinion Gear Fuel Cell Radio Box Trail Finder 2 Plastic Body Posts Leaf Spring Shackles & Mounts Kit RC4WD Marlin Crawlers Front Plastic Tube Bumper for Trail Finder 2 RC4WD Marlin Crawlers Rear Plastic Tube Bumper for Trail Finder 2 M3 Offset Short Plastic Rod End (20x) M3 Mini Plastic Rod End (20x) Stamped Steel 1.55 Stock White Beadlock Wheel Yota Ultimate Scale Cast Axle (Front) Yota Ultimate Scale Cast Straight Axle (Rear) RC4WD Marlin Crawlers Side Plastic Sliders for Trail Finder 2 Scale Nylon Long Punisher Shaft (104mm-150mm) 5mm Hole Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole Trail Finder 2 Bumper Mounts Aluminum Driveshaft Locking Ring for Scale Nylon Punisher Shafts Mud Thrashers 1.55 Scale Tires The Ultimate Scale Shocks 90mm (Silver) The Ultimate Scale Shocks 70mm (Silver) RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) RC4WD Mojave II Front Cab (Primer Gray) RC4WD Mojave II Rear Bed (Primer Gray) RC4WD Mojave II Cab Back Panels and Grill Parts Tree (Primer Gray) RC4WD Mojave II Chrome Bumper and Parts Tree RC4WD Mojave II Clear Parts Tree RC4WD Mojave II Dash and Wiper Parts Tree (Black) RC4WD Mojave II Rubber Mirror Mojave II Body Hardware Kit Mojave II Decal Sheet Optional Parts: Trail Finder 2 V8 Engine Mounts King Off-Road Dual Spring Shocks (80mm Medium OD) King Off-Road Dual Spring Shocks (90mm Medium OD) King Off-Road Dual Spring Shocks (100mm Medium OD) RC4WD Bivouac 1/10 M.O.A.B Camping Trailer w/Tent BigDog 1/10 Dual Axle Scale Boat Trailer Front: King Off-Road Scale Dual Spring Shocks (70mm) RC4WD 70mm Old Man Emu Nitrocharger Sport Shock by ARB Rear: The Ultimate Scale Shocks 90mm (Silver) RC4WD Superlift Superide 90mm Scale Shock Absorbers King Off-Road Scale Dual Spring Shocks (90mm) RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB The Ultimate Scale Shocks 90mm (Black) Hopups: Truck Topper Bench Seat Driver Winch Rear 4 Link Kit Front 3 Link w/Panhard Bar XVD For Yota Front Axle Scale Aisin/Yota Style Hubs Rear Scale Hubs RC4WD Marlin Crawlers Front Steel Tube Bumper for Trail Finder 2 Rear Machined Aluminum Bumper w/Hitch RC4WD Marlin Crawlers Side Metal Sliders for Trail Finder 2 Red Super Soft Leaf Springs RC4WD Marlin Crawlers Rear Tube Bumper for Trail Finder 2 Shooter Shackles "Black" or "Silver" Punisher Shaft asic Lighting System Rook Rack Body Lift Kit King 90mm Offroad Shocks (Rear) RC4WD Superlift Superide 90mm Scale Shock Absorbers RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB K44 Scale Front Axle K44 Scale Rear Axle K44 front knuckles to use stock steering links Mickey Thompson 1.55 Baja MTZ Scale Tires Mickey Thompson 1.55 Baja Claw TTC Scale Tires Interco IROK 1.55 Scale Tires Scale Accessories Angle Rear tire carrier for Truck Bed Tough Armor Rear Aluminum Bumper Big Boss Fender Flares Front Inner Fender Set for Mojave / Hilux Body Big Boy Heavy Duty Aluminum Ladder Mounting Kit for Tamiya F350 body on Trail Finder 2 Universal Front Bumper Mount for Trail Finder 2 Rebuildable Super Punisher Shaft (100mm-118mm, 3.94"-4.65") 5mm Hole Tow Bar Mount for Axial SCX10 Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2 RC4WD Marlin Crawlers Front Winch Bumper for Trail Finder 2 RC4WD Skid Plate for Trail Finder 2 V8/R4 Rock Krawler Replacement 3/4 Link kit for Trail Finder 2 Tough Armor Front Lightbar Bumper for Trail Finder 2 Yota Ultimate Scale Cast Straight Silver Axle (Rear) RC4WD Teraflex Revolver Shackle RC4WD Teralfex Revolver Z-Box for Trail Finder, F-350, Hilux, Tundra Steel Tube Rear Bumper for Trail Finder 2 Steel Tube Rollbar Rack for TF2 Mojave (B) Steel Push Bar Front Bumper for Trail Finder 2 Steel Tube Rollbar Rack for TF2 Mojave (A) Rear Window Guard for Hilux & Bruiser & Mojave Items of Interest: (not required for completion) Paint for body Paint for Body lenses Grease and Lubrication  

5.495,-

6.995,-

Ikke på lager
-21%
Hovedbilde RC4WD T0068 Interco IROK 1.7 Hovedbilde RC4WD T0068 Interco IROK 1.7
RC4WD T0068 Interco IROK 1.7" Scale Tires
This is a pair of RC4WD Interco Irok 1.7" Tires and Foam Inserts. FEATURES Ideal for use on a variety of terrain including rocks, mud and snow Advanced X2SS soft & sticky compound Reinforced sidewall   INCLUDES Two Interco Irok 1.7" Tires and Foam Inserts   REQUIREMENTS 1.7" Wheels   SPECIFICATIONS Outer Diameter: 4.1" (104.3mm) Inner Diameter: 1.7" (43mm) Width: 1.65" (42mm) Weight: 2.9oz (82g) per tire

399,-

439,-

KJØP
-9%
Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

KJØP
-10%
Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator
Castle Creations CC BEC 10A 6S Switching Regulator
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Hovedbilde Tamiya 9225105 W Parts Front Grill Toyota Hilux ...
Tamiya 9225105 W Parts Front Grill Toyota Hilux ...
  These are the W Parts for the Tamiya Toyota Hilux High-Lift Kit                  These Parts Consist of the Front Grill. FEATURES: Nylon construction           Black in color INCLUDES: W Parts for Tamiya Toyota Hilux High-Lift REQUIRES: Assembly and installation on the vehicle

189,-

Ikke på lager
Hovedbilde Tamiya 9115196 P Parts Clear Lenses Toyota Hilux ...
Tamiya 9115196 P Parts Clear Lenses Toyota Hilux ...
  This is the P-Parts Clear Lenses for the Tamiya Hilux Kit FEATURES: All head, tail, side marker, pushbar and roll bar light lenses in             both clear and transparent yellow INCLUDES: One parts tree with all light lenses in clear and one parts tree with             all lenses in transparent yellow REQUIRES: Installing at each light location following diagram in manual  

119,-

KJØP
Hovedbilde GT Power LED CRAWLER LIGHT BAR SET (5 SPOTLIGHT)
GT Power LED CRAWLER LIGHT BAR SET (5 SPOTLIGHT)
Lysbar for 1/10 biler Features: Suitable for all 1/10 crawlers 5 Spotlights Specifications: For: crawler Material: plastic Color: silver Light diameter: 2cm Cable length: 40cm Package Information: Package size: 22 * 11 * 3cm / 8.7 * 4.3 * 1.2in Package weight: 57g / 2oz Adhesive tape package Package List: 1 * G.T.POWER LED Crawler Roof Light Bar Set 1 * Manual

199,-

KJØP
Hovedbilde RC Light 10010 Four LED Set
RC Light 10010 Four LED Set
RC lys-sett med 4 lys dioder. Består av 5mm LED. 2 stk røde og 2 stk hvite for forlys og baklys. Det er en microbryter for å skru av og på. For drift biler, onroad, Crawler etc etc Bare fantasien setter stopper. 

109,-

KJØP
Hovedbilde RC Led Light Kit For Cars And Trucks(12Lights)
RC Led Light Kit For Cars And Trucks(12Lights)
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

KJØP
-8%
Hovedbilde Metal Servo Arm 25T Blå
Metal Servo Arm 25T Blå
Servohorn i aluminium med blå farge 25 Splines. Passer Futaba og Hitec 83XX & 93XX serie med 25 splines. Leveres 1 stk i pakken.

79,-

KJØP
Hovedbilde RC4WD S0570 Red Super Soft Flex Leaf Springs (4)
RC4WD S0570 Red Super Soft Flex Leaf Springs (4)
These are the Red Super Soft Flex Leaf Springs from RC4WD.   FEATURES Compatible with the Tamiya F-350, Hilux and RC4WD Trail Finder  Constructed of high alloy spring steel  35% softer than stock for more flex and greater articulation   INCLUDES Four Red Super Soft Flex Leaf Springs   SPECIFICATIONS  Length: 4.746" (120.57mm)

439,-

KJØP
Hovedbilde RC4WD E0069 1/8 Warn Zeon 10 Winch
RC4WD E0069 1/8 Warn Zeon 10 Winch
This is the RC4WD 1/8 scale Warn Zeon 10 9.5CTI Winch.     FEATURES Cast aluminum case  Working spring loaded Warn hook with synthetic winch rope  May be operated by a 3S LiPo battery, or another battery with a  6-11.1V range. Check your battery`s volt when fully charged to prevent over-voltage.  Stamped steel components  Same mounting locations as the Bulldog Winch   INCLUDES 1/8 scale Warn Zeon 10 9.5CTI Winch  Warn Winch Pull Tag  Four M2.5x4mm Socket Head Cap Screws  Four M2.5x6mm Socket Head Cap Screws   REQUIREMENTS Z-S1092 Wireless Remote/Receiver Controller Set or  Z-S1089 Wired Winch Control Unit   SPECIFICATIONS  Load Limits: Dead Lift 6.6lbs (3kgs)  Load Limits: Rolling Drag 9lbs (4.1kgs)  Rope Length: 3' (9m)  Length: 2.9" (73.68mm)  Total Width: 1.25" (31.75mm)  Height: 1.31" (33.56mm)  Weight: 2.1oz (60g)

649,-

749,-

KJØP
-13%
Hovedbilde RC4WD S1092 Warn 1/10 Wireless Remote/Receiver Winch ...
RC4WD S1092 Warn 1/10 Wireless Remote/Receiver Winch ...
This is the Warn 1/10 scale Wireless Remote/Receiver Winch Controller Set from RC4WD. FEATURES For use with the RC4WD Bulldog 9300XT, and the WARN 9.5CTI winches 2.4GHz technology Heavy duty drive circuit Over 10' (3.04m) range Simple hookup INCLUDES Wireless Remote with Battery Receiver 6" (152mm) Battery/Receiver Power Wire 6" (152mm) Receiver/Winch Control Wire SPECIFICATIONS Receiver; Battery Compatibility: 2 and 3 cell LiPo Operating Voltage: 6 - 11.1V (see Comments) Length: 1.6" (40.4mm) Width: 1.2" (30.2mm) Height: 0.37" (9.4mm) Weight: 0.5oz (14g) Wires; Length: 6" (150mm) Wires Weight: 0.14oz (4g) COMMENTS This Wireless Remote/Receiver is not waterproof. Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell lipo.

595,-

KONTAKT
Hovedbilde RC4WD 0341 ARB Winch Snatch Block
RC4WD 0341 ARB Winch Snatch Block
 This is the ARB Winch Snatch Block from RC4WD. FEATURES: Works with the RC4WD winch to help give the winch double pulling             power           Fully functional metal construction with ultimate detailing for high             degree of realism   INCLUDES: ARB Winch Snatch Block from RC4WD   SPECS:    Length: 1.18" (30mm)           Width: 0.58" (14.8mm)           Thickness: 0.24" (6.26mm)           Weight: 0.1oz (3g)   COMMENTS: ARB is a registered trademark of the ARB company. The ARB logo is             property of ARB.  

239,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png