Hopp til innhold
Hjem / Masse Diverse / RC4WD-produkter / RC4WD 1089 Wired Winch Control Unit
-4%

RC4WD 1089 Wired Winch Control Unit

Art.nr: S1089

549,-

569,-

- 4%
RC4WD

RC4WD
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Wired Winch Controller from RC4WD.

FEATURES

Compatible with the RC4WD Warn 9.5cti and Bulldog winches
Allows winch control from the third channel of the vehicle's transmitter*
2 & 3 cell LiPo compatible
Operates on 6-11.1V
Easy plug and play operation

INCLUDES

Wired Winch Controller
6" Receiver/Receiver Power Wire
6" Receiver/Winch Control Wire

SPECIFICATIONS

Dimensions: 1.63 x 1.22 x 0.4" (10.3 x 41.5 x 31mm)
Weight: 0.35oz (10g)
Wire Length: 6" (150mm)
Wire Weight: 0.35oz (10g)

COMMENTS

*Third channel must be a three position switch (on/off/on).
This controller is not waterproof.
Alternative to this unit is a wireless controller which does not require a 3 channel radio

Produsent

RC4WD

RC4WD

Kunder kjøpte også

Hovedbilde RC4WD E0119 1/10 Warn 9.5cti-s Winch Hovedbilde RC4WD E0119 1/10 Warn 9.5cti-s Winch
RC4WD E0119 1/10 Warn 9.5cti-s Winch
RC4WD 1/10 Warn 9.5cti-s Winch One of the most iconic names in off-road. This is an all new RC4WD 1/10 Warn 9.5cti winch. This winch offers ultra scale looks, and superior quality and craftsmanship. Officially Licensed by Warn.     Specifications:   Cast Zinc Case Stamped Steel Components Working Spring Loaded Warn Hook Synthetic Winch Rope Highly Detailed Full Warn Decals Installed Voltage: 6v to 11.1v Can operate on 3 Cell Lipo Easily Rebuildable 3ft/.9M Rope Pre-Installed Same Mounting Locations as Bulldog Winch Load Limits: Dead Lift 6.6lbs/3kgs Load Limits: Rolling Drag 9lbs/4.1kgs 30 Day Warranty Length: 2.98in / 75.85mm Total Width: 1.16in / 29.62mm Height: 1.39in / 35.35mm Weight: 3.39oz / 96.2g     What's Included:         1x RC4WD 1/10 Warn 9.5cti-s Winch            1x RC4WD Warn Winch Pull Tag 4x M2.5x4mm SHCS (Black) (Z-S0760) 4x M2.5x6mm SHCS (Black) (Z-S0855) 1x Warn Decal Sheet   Required Parts: RC4WD Warn 1/10 Wireless Remote/Receiver Winch Controller Set (Z-S1092) RC4WD Wired Winch Control Unit (Z-S1089)   Optional Parts: RC4WD ARB Winch Snatch Block (Z-S0341) RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168) RC4WD 1/10 Warn Hawse Polished Aluminum Fairlead (Z-S1310) Winch Mount for Axial Wraith (Z-S1307) RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2 (Z-S1496) RC4WD Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep (Z-S1338) RC4WD 1/10 Viking Roller Fairlead for Warn 9.5cti Winch (Z-S1498) RC4WD Warn 1/10 Premium Winch Hook (Z-S1551) RC4WD Warn Rock Crawler Front Winch Bumper for Trail Finder 2 (Z-S1590) (With Mount Plate Reversed) Metal Front Winch Bumper for Traxxas TRX-4 Land Rover Defender D110 (VVV-C0469) RC4WD Warn Epic Sidewinder (Chrome) (Z-S1997) RC4WD Warn Epic Sidewinder (Black) (Z-S1998) RC4WD WARN Epic Hyperlink (Chrome) (Z-S1999) RC4WD WARN Epic Hyperlink (Black) (Z-S2000)   Replacement Parts: Replacement Motor/Gearbox 1/10 Warn 9.5cti 1/10 Winch (Z-E0051) 1/10 Warn Hook (Z-S1011) Synthetic Winch Rope (Z-S0038) RC4WD Warn Winch Pull Tags (Z-S1660)   Replacement Hardware: 4x M2x5mm FHCS (Silver) 2x M2x4mm SHCS (Silver) (Z-S0927) 2x M2x6mm SHCS (Silver) (Z-S0994)   Notes: This winch requires a control unit. We offer both a wired (uses your radio's third channel) and wireless unit (hooks directly to a battery). This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty. Same mounting points as our Bulldog winches Dead Lift is defined as the winch lifting a product from a higher position with no help from the product being lifted. Rolling Drag is defines as a truck using its rolling force to help the winch pull a truck or products weight.   Warranty Definition: This product will be free from defects in materials and workmanship and fully functional when new. The gearbox can handle certain weight limits. If you over load the winch, the gearbox or motor will fail. This is not considered a warranty issue. We have replacement motor/gearbox units and provide clear instructions on replacement. Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries and used under license to RC4WD.

399,-

599,-

KJØP
-33%
Hovedbilde Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ... Hovedbilde Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels - Do Not Follow Description: Add character to your crawler rig with our series of tire covers with a wide variety of smart and clever messages. White ink printed on tough synthetic leather to help deal with harsh conditions and for easy cleaning after trail runs.         Features: For: 1.9 inch sized wheels Material: Synthetic Leather   Includes: Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels 1pc

59,-

69,-

KJØP
-14%
Hovedbilde Yeah Racing 019 Brass Hex Adaptor For Axial SCX10 III ...
Yeah Racing 019 Brass Hex Adaptor For Axial SCX10 III ...
Description: Brass Hex adaptors for Axial's SCX10 III and Capra! Add a tiny weight to get more grip from your tires. Feature: For: Axial SCX10 III and Capra Material: Brass Color: Brass Include Brass Hex Adaptors (4 pcs)

119,-

KJØP
Hovedbilde Castle Creations 010016202 Mamba Micro X 12.6V ...
Castle Creations 010016202 Mamba Micro X 12.6V ...
Castle Mamba Micro-X Crawler Edition ESC with 1406-2280KV Sensored Motor Combo Putting the X in Extreme! The Mamba Micro X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the lightweight, small footprint Mamba Micro X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 3.6kg on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 1.8kg. If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC with the same motor. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation. Use of an external BEC is recommended if running a high power or digital servo.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes This SPECIAL EDITION of the Mamba Micro X includes solder posts with 16 AWG wire for the motor connection; it also includes the matching 4mm female bullets to pair with the included 1406-2280kv sensored brushless motor.  The Auxiliary Advantage Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Try out the brand new Crawler Mode for incredible versatility! Telemetry Capability The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.  Package Includes: Crawler Edition Mamba Micro X w/solder posts 1406-2280kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo (12.6V) BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes, waterproof* Cooling Fan: No Length: 41mm Width: 19mm 28mm Weight (without wires): 34g Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness. Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, T- Plugs, or Traxxas Power Connect are recommended. Product Use Statements:  Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty. Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford. The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations. Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 3.6kg. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor. Recommended Motors: Combo includes 1406-1900kv sensored brushless motor. Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style; 1.8kg for more aggressive driving styles. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Motor specs: Input Voltage Range: 2S-3S LiPo Kv: 2280 Max. RPM: 100,000 Length: 49.5mm Diameter: 36mm Weight (w/wires): 197g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Optional 5mm rotor replacement available Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 2S-3S weighing less than 3.6kg. It can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style like rock crawling and trail running; 1.8kg for more racing and aggressive driving styles. Tech Notes:  Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

2.395,-

2.595,-

KJØP
-8%
Hovedbilde DynoMAX 9702 Charge Lead Traxxas with 4mm banana plugs
DynoMAX 9702 Charge Lead Traxxas with 4mm banana plugs
Charge Lead Traxxas with 4mm banana plugs

79,-

KJØP
Hovedbilde Traxxas 6747 Gear 32P 11T
Traxxas 6747 Gear 32P 11T
is is the stock 32P 11 Tooth Pinion Gear for the Traxxas Stampede 4x4 VXL. FEATURES: Steel construction INCLUDES: 32P 11 Tooth Pinion Gear with Set Screw REQUIRES: Fastening to motor shaft SPECS:    Number of Teeth: 11           Pitch: 32

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 6745 Gear 32P 9T
Traxxas 6745 Gear 32P 9T
This is a 9 Tooth 32 Pitch Pinion Gear for the Traxxas. FEATURES: Machined Steel Designed for a 3mm shaft INCLUDES: One 9 tooth Pinion Gear One 3 x 4mm Set Screw

45,-

55,-

KJØP
-18%
Hovedbilde Pro-Line 2.2
Pro-Line 2.2" Dual Stage Closed Cell RC Foam Inserts ...
This is a pair of Pro-Line 2.2" Dual Stage Foam Inserts for Pro-Line 2.2" XL Tires.     FEATURES Fits the following Pro-Line tires;  -10107-14 Interco TSL SX Super Swamper 2.2"  -10115-14 Flat Iron XL 2.2"  -10119-14 BF Goodrich T/A KR2 2.2" Lightweight and waterproof blue closed cell inner foam construction Outer made from soft open cell foam that provides maximum grip while maintaining a fully supported sidewall for greater side hilling performance     INCLUDES Two Pro-Line 2.2" Dual Stage Foam Inserts in Blue and White     SPECIFICATIONS Diameter: 5.6" (142mm) Width: 2.00" (51mm) Outer Thickness: 0.75" (19mm)

379,-

399,-

KJØP
-5%
Hovedbilde Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Traxxas 3944X Pinion Gear 14T-32P Hardened Steel
Traxxas 3944X Pinion Gear 14T-32P Hardened Steel
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Traxxas 6746 Gear, 10T pinion (32-p) (steel)/ set ...
Traxxas 6746 Gear, 10T pinion (32-p) (steel)/ set ...
Gear, 10-T pinion (32-p) (steel)/ set screw

45,-

KJØP
Hovedbilde Traxxas 3942X Pinion Gear 12T-32P Hardened Steel
Traxxas 3942X Pinion Gear 12T-32P Hardened Steel
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

79,-

89,-

KJØP
-11%
Hovedbilde Yeah Racing YA-0416RD Foldable Winch Anchor for ... Hovedbilde Yeah Racing YA-0416RD Foldable Winch Anchor for ...
Yeah Racing YA-0416RD Foldable Winch Anchor for ...
Yeah Racing Foldable Winch Anchor for CR01-27 This is Yeah Racing Foldable Winch Anchor. This Product is made from high quality and durability Aluminum. Install this product so your crawler can grip into firmly and safely into sand, clay, and snow. Foldable design will allow to keep the anchor compact and tidy on the rig when not is use. Also it will provide a winch point when there are no tree or obstacle near.   Features: For: 1/10 RC Car Material: CNC Aluminum Color: Red   Specifications: Total Length: 2.25in / 55mm   Includes: Foldable Winch Anchor (1 pc)

159,-

199,-

KJØP
-20%
Hovedbilde Yeah Racing YA-0357BK 1/10 RC Rock Crawler Accessory ... Hovedbilde Yeah Racing YA-0357BK 1/10 RC Rock Crawler Accessory ...
Yeah Racing YA-0357BK 1/10 RC Rock Crawler Accessory ...
Yeah Racing 1/10 RC Rock Crawler Accessory 96cm Long Chain and Hook Set Black Description: This is Yeah Racing 1/10 RC Rock Crawler Accessory 96cm Long Chain and Hook Set Black.         Features: For: 1/10 RC Material: Steel Color: Black & Red   Specifications: Length: 96 cm   Includes: (#YA-0357BK) 1/10 RC Rock Crawler Accessory 96cm Long Chain and Hook Set Black (1 pc)

59,-

99,-

KJØP
-40%
Hovedbilde Yeah Racing TACC-S01BU Aluminum Essential Conversion ...
Yeah Racing TACC-S01BU Aluminum Essential Conversion ...
Yeah Racing Aluminum Essential Conversion Kit For Tamiya CC01 Blue Description: Aluminum upgrade kit which converts the Essential Load Bearing parts to aluminum! Featuring is our bearing supported four-link pivot which allows for un-hindered flex and reduces binding from the links! A redesigned steering rack that uses bearings provides smoother operation and more precise steering input! Aluminum suspension components for the front gives you more stability on the trails! *Photos for reference only. Feature: For: Tamiya CC-01 (Short and Medium Wheelbase: 242 and 252mm) Material: Aluminum Color: Blue Include: TACC-001BU Aluminum Bearing Supported Steering Rack For Tamiya CC01 (Blue) (1 pc) TACC-002BU Aluminum Front Lower Suspension Arm For Tamiya CC01 (Blue) (1 pc) TACC-003BU Aluminum Rear Four Link Conversion For Tamiya CC01 (Blue) (1 pc) TACC-005BU Aluminum 7075 & Steel Universal Shaft For Tamiya CC01 (Black) (1 pc) TACC-008BU Aluminum C Hub For Tamiya CC01 (Blue) (1 pc) TACC-009BU Aluminum Steering Knuckle For Tamiya CC01 (Blue) (1 pc)

1.349,-

1.399,-

KJØP
-4%
Hovedbilde Yeah Racing DDL-090GM 90mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-090GM 90mm Desert Lizard Two Stage ...
Yeah Racing DDL-090GM 90mm Desert Lizard Two Stage ...
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Gun Metal For 1/10 Crawler 'G6 Certified' Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!         Features: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum   Includes: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack)   Note: The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.

319,-

349,-

KJØP
-9%
Hovedbilde RC4WD S1498 1/10 Viking Roller Fairlead Warn 9.5cti ...
RC4WD S1498 1/10 Viking Roller Fairlead Warn 9.5cti ...
RC4WD 1/10 Viking Roller Fairlead for Warn 9.5cti Winch     The new Viking Offroad Roller Fairlead is all you need to top of your scale build. The Fairlead is precision stamped steel with anodized black rollers. The Viking name plate tops it off and send it over the edge.     Specifications: CNC Machined Billet Aluminum "Viking" logo Hole to Hole Width: 1.22in / 31mm Roller to Roller Width: 0.1in / 2.66mm Height: 0.56in / 14.3mm Width: 1.49in / 37.8mm Thickness: 0.35in / 9mm Weight: 0.18oz / 5g     Shown installed with RC4WD 1/10 Warn 9.5cti Winch for example (Not Included)     Shown installed with RC4WD 1/10 Warn 9.5cti Winch, Trail Finder 2 RTR w/Mojave Body Set (Z-RTR0019 "Disc") and RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2 (Z-S1496) for example (Not Included)     What's Included: 1x RC4WD 1/10 Viking Roller Fairlead for Warn 9.5cti Winch 2x M2 x 4mm SHCS (Z-S0927) 1x Viking Decal Sheet Replacement Parts: Socket Head Cap Screw M2 X 4mm (10) Notes: Fits RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119) Fits RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2 (Z-S1496) Compatible with stock bumpers on the following TRX-4 trucks: 2021 Ford Bronco, Land Rover Defender, Sport, Tactical Unit, G-500 and AMG 6x6. Viking Offroad is a registered trademarks of the Viking Offroad company. The Viking Offroad logo and Viking head logo are property of Viking Offroad and used under license to RC4WD.

249,-

KJØP
Hovedbilde Absima 350CPS / 30WT Silicone Shock Oil 60ml
Absima 350CPS / 30WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 350. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Absima 450CPS / 37WT Silicone Shock Oil 60ml
Absima 450CPS / 37WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 450. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Absima 200CPS / 19WT Silicone Shock Oil 60ml
Absima 200CPS / 19WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 200. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Absima 250CPS / 23WT Silicone Shock Oil 60ml
Absima 250CPS / 23WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 250. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Yeah Racing YA-0468 Heavy Anchor for Crawler Winch ... Hovedbilde Yeah Racing YA-0468 Heavy Anchor for Crawler Winch ...
Yeah Racing YA-0468 Heavy Anchor for Crawler Winch ...
Yeah Racing Heavy Anchor for Crawler Winch CR01-27 This is the Yeah Racing Winch Anchor, comes complete with a hook so you can attach it to any of our tow hooks! This device is used with your winch to help give you a winch point when a tree is not near. Install this device on a point so it grips into the ground and it will help to get your truck from any bad spot!   Features: For: Crawler Winches Material: Steel Color: Black/Red   Includes: Heavy Anchor for Crawler Winch (1 pc) Tow Hook Attachment Ring (1 pc)

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ... Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Aluminum & Brass Drop Hitch Receiver for Traxxas TRX-4   (Tilhengerfeste) Aluminum Drop Hitch receiver for Traxxas's TRX-4, use this to easily mount a trailer. Features three different offset holes for you to adjust the length which it sticks out the rear of your bumper. *Photos for reference only.   Feature: For: Traxxas TRX-4 Original Plastic Rear Bumper or YA-0549 Material: Aluminum & Brass Color: Silver   Include: Drop Hitch Receiver (1 pc) Set Screw (1 pc)

109,-

KJØP
Hovedbilde Yeah Racing DDL-120RD 120mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-120RD 120mm Desert Lizard Two Stage ...
Yeah Racing DDL-120RD 120mm Desert Lizard Two Stage ...
Yeah Racing 120mm Desert Lizard Two Stage Internal Spring Damper Pair Red For Crawler Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!         Features: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum   Includes: Yeah Racing 120mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack)

379,-

449,-

KJØP
-16%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png