Hopp til innhold
Hjem / Batteri & lader / Plugger / Radient 010064 EC5 Pairs (5PCS)

Radient 010064 EC5 Pairs (5PCS)

Art.nr: RDNAC010064

219,-

Modelsport AS

Modelsport AS
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Radient 010064 EC5 Pairs (5PCS)

MERKE

Radient
KONTAKT

EC5

Produsent

Modelsport AS

Modelsport AS

Relaterte produkter

 

Hovedbilde Radient 010068 CHARGE LEAD, 4MM BULLET TO EC5 ...
Radient 010068 CHARGE LEAD, 4MM BULLET TO EC5 ...
Art.nr: RDNAC010068
Copied
CHARGE LEAD, 4MM BULLET TO EC5 MALE,12AWG, 150MM (ESC END)

109,-

119,-

KJØP
-8%
Hovedbilde Radient 010121 Battery Aadapter, EC5 Female To Deans ...
Radient 010121 Battery Aadapter, EC5 Female To Deans ...
Art.nr: RDNAC010121
Copied
Battery Aadapter, EC5 Female To Deans (HCT) Male

59,-

KJØP
Hovedbilde Radient 010066 EC5 FEMALE (BATTERY END) (5PCS)
Radient 010066 EC5 FEMALE (BATTERY END) (5PCS)
Art.nr: RDNAC010066
Copied
EC5 FEMALE (BATTERY END) (5PCS)

99,-

KJØP
Hovedbilde Radient 010067 EC5 MALE (ESC END) (5PCS)
Radient 010067 EC5 MALE (ESC END) (5PCS)
Art.nr: RDNAC010067
Copied
EC5 MALE (ESC END) (5PCS)

119,-

KJØP
Hovedbilde Radient 010065 EC5 PAIRS (10PCS)
Radient 010065 EC5 PAIRS (10PCS)
Art.nr: RDNAC010065
Copied
EC5 PAIRS (10PCS)

419,-

439,-

KJØP
-5%

Kunder kjøpte også

Hovedbilde Ezrun Max 5 Hobbywing ESC Hovedbilde Ezrun Max 5 Hobbywing ESC
Ezrun Max 5 Hobbywing ESC
Hobbywing EzRun Max5 er vannbestandig og leveres med ferdig påloddet motorkontakter (6,5mm female gullkontakt) og uten batterikontakt. Regulatoren er kompatibel med 3-8s LiPo beregnet for bruk på 1/5 biler som Traxxas X-Maxx, HPI Baja, Desert Buggy XL og Losi 5IVE. På 8S er det anbefalt med motorer under 1000KV.   Høy kvalitet MAX5 består kun av høy-kvalitetskomponenter og er designet for bruk til hard-core bashing biler.   Fleksibel og allsidig Her har brukeren muligheten til å justere ESCens parametere for å tilpasse til egen kjørestil. Ekstrem akselerasjonsmuligheter Stabil Output Asfalt og terreng   All slags vær! Regulatoren er vanntett og støvtett og passer til bruk i all slags vær.   High Voltage BEC BECen er innebygd og har en output current på 25Amp og justerbar output voltage på 6-7.4V.   Elektronisk bryter Med regulatoren følger det med en elektronisk bryter som skal holde til å kunne slå av og på bilen over 50.000 ganger! Bryteren er plassert i et vann og støvtett cover.   Oppdateringer Alle oppdateringene som gjøres på MAX5 kan gjøres via USB-Link, LCD Program Boxen og en PC. Alle oppdateringene er gratis.   Vedlikehold Med unntak av kjøleviften så er ESCen så og si vedlikeholdsfri, vi anbefaler uansett å fjerne støv, steiner og vann fra bil for å unngå slitasje på drivverk.   Anti-Spark MAX5 har innebygget anti-spark koblinger som hindrer gnist ved tilkobling av batterier med høy spenning.   Size Matters! MAX5 er som tidligere nevnt designet for bruk i 1/5 skala biler. Noen eksempler på biler som vil passe MAX5 er: HPI Baja Buggy Losi 5IVE-T Elektrisk konvertering Desert Buggy XL Traxxas X-Maxx   Spesifikajoner Innspenning: 3-8S LiPo Dimensjoner: 93.4 x 58.1 x 47.8mm Vifte: 45 x 45 x 10mm (5-7.4V) BEC: Ja Programmering: Støtter LED og LCD Program Box, SET Button programmering, WiFI-Module, OTA-Programmer og Programeringsport OBS! Dette er en ekstremt kraftig ESC det er derfor viktig å fjern pinion gir ved nyinstallering og gjør kalibrering og programmering før montering av pinion igjen. Det anbefales også alltid å ha hjulene i luften under oppstart. High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5/MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX5/MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. MAX5 Applications: The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It’s also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies. Specifications:   Model EZRUN-MAX6 EZRUN-MAX5 Cont./Peak Current 160A/1050A 200A/1300A Motor Type Sensored / Sensorless Brushless Motor (only in sensorless mode) Applications 1/6th Touring Car, Buggy, Truggy and Truck 1/5th Touring Car, Buggy, Truggy and Truck Motor Limit With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor) With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor) With 8S LiPo/24S NiMH: KV ≤ 1000 (58110 size motor) LiPo/NiMH Cells 9-24S NiMH, 3-8S LiPo BEC Output 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC) Cooling Fan Powered by the stable BEC voltage of 6V/7.2V Connectors Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller). Size/Weight 70(L)x56(W)x46.5(H)/240g 93.35 (L)x 58.12 (W)x 47.81 (H)/342g Programming Port FAN /PRG Port   High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.   Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.   Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX5 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX5 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX5 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX5 Applications: The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It’s also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies Specifications Scale:1/5th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 200A/1300A Input Voltage: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A Wires & Connectors Input Wires: Red-8AWG-200mm*1/Black-8AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB) (Note: All the wire length above is the original length not the length you see from the outside.) Fan Size: 45.0x45.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 93.4x58.1x47.8mm Weight: 342g Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/5th Touring Car/Buggy/Truck KV Rating/T Count: 8S LiPo: KV ≤ 1000 (58110 Size Motors)

2.385,-

2.585,-

KJØP
-8%
Hovedbilde Turnigy 10993 Twin Charging Harness (6S to 2x3S)
Turnigy 10993 Twin Charging Harness (6S to 2x3S)
Turnigy 10993 Twin Charging Harness (6S to 2x3S) This harness allows you to charge and balance 2 3S packs with a 6S port. Uses JST-XH balance plugs and XT60 discharge plug.

79,-

KJØP
Hovedbilde Radient 0306 Body Clip Retainer White 10 Clip 2
Radient 0306 Body Clip Retainer White 10 Clip 2
Body Clip Retainer White 10 Clip 2 Retainer   En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger.

39,-

KJØP
Hovedbilde Traxxas 1834A Body Clips Standard Black (12)
Traxxas 1834A Body Clips Standard Black (12)
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 8655R Centre Driveshafts Steel Set
Traxxas 8655R Centre Driveshafts Steel Set
Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)

749,-

799,-

KJØP
-6%
Hovedbilde Traxxas 8672A Tires & Wheels 3,8
Traxxas 8672A Tires & Wheels 3,8" Talon EXT on Carbide ...
Tires & wheels, assembled, glued (orange wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

529,-

569,-

KJØP
-7%
Hovedbilde Yeah Racing YE-0029 Tornado High Speed Cooling Fan 30 ... Hovedbilde Yeah Racing YE-0029 Tornado High Speed Cooling Fan 30 ...
Yeah Racing YE-0029 Tornado High Speed Cooling Fan 30 ...
Yeah Racing Tornado High Speed Cooling Fan 30 x 30mm for ESC Description: Yeah Racing Tornado with a ESC plug pre-installed for your convenience. Fits a vast majority of ESC's on the market. Note max voltage for this fan is 8.4V. Features: For: ESC Material: Plastic Color: Black Includes: Tornado High Speed ESC Cooling Fan (1 pc) Screws (4 pcs)

119,-

129,-

KJØP
-8%
Hovedbilde Yeah Racing YA-0641 Dual Tornado High Speed Fan ... Hovedbilde Yeah Racing YA-0641 Dual Tornado High Speed Fan ...
Yeah Racing YA-0641 Dual Tornado High Speed Fan ...
Yeah Racing Dual Tornado High Speed Fan 30x30mm for Motor Heat Sink Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) For the best performance, please run the Yeah Racing Tornado Cooling Fan for 2 - 3 hours continuously on the first time usage. Dual fans are wired so you only need one power port to run both fans at the same time! Feature: For: ESC / Heatsink / Motor Color: Black Material: Plastic Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Dual Fan  (1 pc)

209,-

239,-

KJØP
-13%
Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ... Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Disse lagerene er samme størrelse som Tamiya 850 Yeah Racing RC PTFE Bearing (5x8x2.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011BS/10) RC Telfon Bearing (5x8x2.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 2578 Button Head Screws 3x12mm (6)
Traxxas 2578 Button Head Screws 3x12mm (6)
These are 3x12mm Button Head Screws from Traxxas FEATURES: Steel Construction           Black in color           Hex head INCLUDES: Six button head screws SPECS:    Length:  12mm (.47")           Diameter: 3mm (.12") COMMENTS: These can be use with various application.

35,-

Ikke på lager
Hovedbilde Traxxas 2551 Screws Countersunk Machine 3x10mm Revo ...
Traxxas 2551 Screws Countersunk Machine 3x10mm Revo ...
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 3621 Bumper Front w/Mount 4x23mm Black (2)
Traxxas 3621 Bumper Front w/Mount 4x23mm Black (2)
This is the Front Bumper with Mount for the                       Traxxas Monster Jam Replica Series. FEATURES: Plastic construction INCLUDES: Front Bumper with Mount and Mounting Screws

59,-

KJØP
Hovedbilde RPM 81242 Rear Skid Plate for the Traxxas Slash ... Hovedbilde RPM 81242 Rear Skid Plate for the Traxxas Slash ...
RPM 81242 Rear Skid Plate for the Traxxas Slash ...
RPM Rear Skid Plate for the Traxxas Slash 2wd replaces the rear skid plate from Traxxas #5837 Quick Notes: – extra screw location strengthens entire rear end of the truck – replaces the rear skid plate from Traxxas #5837 – stock rear bumper / wheelie bar mounts (Traxxas #3677) will not work with RPM skid plates – must use RPM Bumper / Wheelie Bar Mounts – matching Front Skid Plate also available RPM rear skid plates for the Traxxas Slash 2wd are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past! RPM rear Slash skid plates are completely redesigned, making them stronger and much more durable. Our unique design use three chassis mounting points instead of two, triangulating the chassis mounts on the truck, in turn spreading impact energy over a larger area. This is done using a hole already located in the stock chassis, meaning no drilling is required. We also eliminated the cross-tube styling of the stock skid plates in favor of a solid flat skid design with a large radius at the transition points to allow the truck to slide over obstacles that would have normally caught on the stock rear skid plate. That means no more direct impacts to the lower rear end of the truck, which is the primary source of a broken chassis. As a final design touch, we added four thick skid rails on both the front and rear skid plates which reduce sliding friction while improving the overall durability of the skid plates and the truck. At the tail end of the rear skid plate, a skid rail runs from side to side to protect the lower transmission screw and rear bumper mount while providing a smooth transitional surface. RPM skid plates for the Traxxas Slash are sold in three color options – black, blue and our all new gray color which is designed to blend in with the stock Traxxas gray colors of the chassis, bulkheads & transmission. Tech Notes: Stock rear bumper mounts (Traxxas #3677) will not work with RPM skid plates. To retain the use of a rear bumper or wheelie bar, RPM #80902 or #80905 must be used. RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash chassis and chassis components.

149,-

KJØP
Hovedbilde Bronto Ladekabel - XT60 til T-Plugg (Deans)
Bronto Ladekabel - XT60 til T-Plugg (Deans)
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med T-plug til XT60-plugger. Benyttes for lading av batterier med T-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 T-Plugg (også kjent som Deans)

79,-

KJØP
Hovedbilde Bronto Silikonkabel 14AWG
Bronto Silikonkabel 14AWG
1 meter rød silikonkabel 1 meter svart silikonkabel Bronto silikonledning av høy kvalitet. Leveres i pakning med 1 meter rød og 1 meter svart.   Spesifikasjoner   AWG 14 Diameter 1.63mm Areal 2.08mm2 PS! Vær oppmerksom på at vi har samme produktbilde på alle ledningstykkelser, og at produktutseendet derfor vil avvike noe fra bildet.

75,-

KJØP
Hovedbilde Tamiya 53435 MEDIUM-NARROW HARD INNER SPONGE – ...
Tamiya 53435 MEDIUM-NARROW HARD INNER SPONGE – ...
Tamiya 53435 MEDIUM-NARROW HARD INNER SPONGE – 2PCS Dette er innlegg laget for 24mm hjul. De kommer i par. Den sorte fargen identifiserer innlegget som hard i fasthet. Innvendig formet for middels smale dekk. Optimalt egnet for høye temperaturer på underlaget. Passer blant annet disse dekkene: 51023, 51049, 53433, 53705, 54256 Merk: Jo hardere innlegget er, desto mindre trekkraft vil dekket gi. Jo mykere innsatsen er, jo mer trekkraft får du ut av dekkene, men de slites også raskere.   Fra produsenten: ★These hard molded tire inserts come into their own in high track surface temperatures, or on high-speed circuits.

69,-

KJØP
Hovedbilde Tamiya 53582 MEDIUM-NARROW MEDIUM INNER *2
Tamiya 53582 MEDIUM-NARROW MEDIUM INNER *2
Tamiya 53582 MEDIUM-NARROW MEDIUM INNER *2 Medium innlegg. Passer blant annet disse dekkene: 51023, 51049, 53433, 53705 og 54256.   Fra produsenten: ★These hard molded tire inserts provide a more neutral alternative to separately sold soft (Item 53434) and hard (Item 53435) products.

69,-

KJØP
Hovedbilde Traxxas 3956 Spur Gear 0.8P 54T
Traxxas 3956 Spur Gear 0.8P 54T
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
Hovedbilde Tamiya 86048 PS-48 Polycarb Spray Metallic Silver 3 oz
Tamiya 86048 PS-48 Polycarb Spray Metallic Silver 3 oz
 This is the Tamiya Color Spray Paint for Polycarbonate Bodies                           (PS-48 Metallic Silver)                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so it can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: One Tamiya PS 48 Metallic Silver Color Spray Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.                    Highly flammable.

169,-

199,-

KJØP
-15%
Hovedbilde Pro-Line 342000 2013 Ram 1500 True Scale Clear Body Hovedbilde Pro-Line 342000 2013 Ram 1500 True Scale Clear Body
Pro-Line 342000 2013 Ram 1500 True Scale Clear Body
This is the Pro-Line 2013 Ram 1500 Clear Pickup Truck True Scale Body. FEATURES Fits the Traxxas Slash, Slash 4x4, Team Associated SC10 2WD, and the  Pro-Line PRO-2 SC (the Traxxas and Team Associated vehicles  require an Extended Body Mount Kit) Slash 4x4 Slash 2wd  Molded from clear GE lexan  Recreates the look of a full size lifted truck INCLUDES 2013 Ram 1500 Clear Pickup Truck True Scale Body with Window Masks  and Decal Sheet REQUIREMENTS #6070-00 Extended Body Mount Kit for Traxxas Slash #6087-00 Extended Body Mount Kit for Traxxas Slash 4x4 #6071-00 Extended Body Mount Kit for Associated SC10 2WD  Body Scissors and Reamer  Lexan safe spray or brush-on paint SPECIFICATIONS  Length: 21.25" (540mm)  Width: 11.75" (299mm)  Height: 6.15" (157mm)  Wheelbase: 12.7" (323mm)       (B3)

549,-

569,-

KJØP
-4%
Hovedbilde Yeah Racing YT-0004 CURVED LEXAN SCISSORS
Yeah Racing YT-0004 CURVED LEXAN SCISSORS
Material: Aluminium Length: 140mm Colour: Black Qty: 1Pc

59,-

KJØP
Hovedbilde Robinson Racing 1225 Extra Hard Steel Mod1 Pinion Gear ... Hovedbilde Robinson Racing 1225 Extra Hard Steel Mod1 Pinion Gear ...
Robinson Racing 1225 Extra Hard Steel Mod1 Pinion Gear ...
Robinson Racing Extra Hard Steel Mod1 Pinion Gear w/5mm Bore (25T)   Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

279,-

KJØP
Hovedbilde Hovedbilde
"BULK" BSD Brushless ESC 50A WP-10BL50-RTR Waterproof ...
Brushless ESC 50A WP-10BL50-RTR Waterproof 2-3S for RC Car *** This is a Brand new item taken from a kit (chopped part), therefore will not have a BSD packaging *** Product Description WP10-BL50 Brushless 50A Sport ESC for RC Car or Truck with DEANS T-Plug connector Hobbywings latest series of waterproof brushless Speed Controller series and is the 50A (300A) sensorless version fitted with a Deans T-Plug battery connector. Features: Water-proof and dust-proof for all-weather races. (Note: please remove the cooling fan before using this ESC in water; clean and dry it soon after the use for avoiding the connectors get rusty.) External programming port, easy to connect to the Program Card when setting the ESC. Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks. Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection. One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the optional device "HW-LED-PC2C" the portable Digital LED Program Box, especially convenient for outdoor use. Programmable Items 1. Run Mode: Forward/Brake - Forward/Reverse/Brake - Forward/Reverse. 2. Drag Brake Force:  0%, 5%, 10%, 20%, 40%, 60%, 80%, 100% 3. Low Voltage Cut off: Disabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/Cell 4. Start Mode (Punch):  9 levels (default is 5) 5. Max Brake Force:  25%, 50%, 75%, 100%, Disabled 6. Max. Reverse Force:  25%, 50%, 75%, 100% 7. Initial Brake Force:  (=drag force), 0%, 20%, 40% 8. Throttle Range:  6%, 9%, 12% 9. Timing: 0.00°, 3.75°, 7.50°, 11.25°, 15.0°, 18.75°, 22.5°, 26.25° Specifications Current - 50A Continuous - 300A Peak Input - 4-9 Cells NiMh, or 2-3S Lipo BEC Output - 6V/3A (Switch Mode) Resistance - 0.0010 Ohm Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode) Cooling Fan - Gets working voltage from battery directly without regulating, the stock fan can work with 2S and 3S Lipo. Size - 48.5(L)X38(W)X32(H)mm Weight - 90g Motor Limit - For 2S Lipo or 6 cells NiMH     On-road: 3650-size or smaller motor with a KV <6000     Off-road/Buggy/Monster: 3650-size or smaller motor with the KV<4000 Motor Limit - For 3S Lipo or 9 cells NiMH:     On-road: 3650-size or smaller motor with a KV<4000     Off-road/Buggy/Monster: 3650-size or smaller motor with a KV<3000 HSP Models Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT Motor connectors: 4mm female bullet. Battery connector: T-Plug (Deans) fitted.

799,-

849,-

KJØP
-6%
Hovedbilde Hobbywing 30402450 Motor EzRun 4990SD G2 1650kV ... Hovedbilde Hobbywing 30402450 Motor EzRun 4990SD G2 1650kV ...
Hobbywing 30402450 Motor EzRun 4990SD G2 1650kV ...
Hobbywing EzRun 4990SD G2 1650kV Sensored Brushless 3-8S Motor Features: Upgraded to a sensored system, with better accelerate linearity and stronger explosive force. It has perfect compatibility when it is matched with Hobbywing EZRUN MAX6 G2 / EZRUN MAX5 HV G2 esc, the esc can automatically recognize this motor, and build a power system with full sensor mode, providing better control performance and more delicate control feel, and also realizing the motor overheat protection function. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, high strength explosion-proof rotor, ultra thin silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface has better waterproof and dust-proof effect than the traditional sensor motor. 8S Sensored motor - Power on Demand The EzRun 4990/5690SD G2 motor is known to be dynamic and dominant. The motor supports up to 8S LiPo and are built to meet the needs of various demands on the market. The motor us powerful and has great response and a linear feel at low speeds to allow the vehicle to easily perform various maneuvers. Great control and plenty of power for hard launches, straight line speed and jumps! Perfect match for EzRun MAX6 G2 ESC The EzRun 4990/5690 SD G2 motor is the perfect match for the EzRun Max 6 G2 ESC. The sensored combo provides excellent control, and power that is easy to drive. Overheating protection for both the motor and the ESC are an added layer of safety. Remarks: After replacing the 8mm plug, it is also compatible with MAX5-G2 ESC. Wider Adaptability The EzRun 4990/5690 SD G2 has 6.5mm bullet plugs pre-installed, and also includes an extra set of 8 mm bullet plugs for usage with ESC's that also have 8mm motor plugs, like the Max5 G2. . All weather sensor plug system The EzRun 4990/5690 is equipped with the HOBBYWING all weather sensor harness that makes all conditions, water proof, sensored combos a reality. This proven sensor harness keeps the elements out so your system can maintain fully sensored operation even in the worst conditions. Note: The IP67 protection level mentioned above is splash-proof, water-proof, and dust-proof under normal use, but it is not permanently effective, and the protection performance may decline due to daily wear and aging. Do not soak in water for a long time, otherwise the product may be damaged. High efficiency - Low temperature rise The motor has ultra-high efficiency, resulting in extremely low temperature rise when comparing it with a motor of the same specification. Using a 0.8N m load test, the internal temperature is 25°C lower, and the outer temperature is 9°C lower. Module design for easy maintenance The motor adopts a modular structure design, which is convenient for daily cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Specs: Type: 1/8-1/7 scale, Brushless, Sensored 4-pole motor KV Rating: 1650 LiPo Cells: 3-8S No-load Current: 7A O.D.: 49mm Length: 90mm Shaft Diameter: 5mm Connectors: 6.5mm Bullets (male) Wires: 8AWG-250MM Weight: 701g Front Bearing: D19xD6xT6mm Rear Bearing: D19xD6xT6mm ESC: EZRUN MAX6 G2 Vehicles: 1/7 On-road, Short course truck & Truck & 1/8 Heavy-duty Monster trucks Examples: ARRMA LIMITLESS, TRAXXAS XRT, ARRMA Mojave EXB

1.599,-

1.749,-

KJØP
-9%
Hovedbilde PowerHD Servo WH40KG Waterproof, Full Alu Case, ... Hovedbilde PowerHD Servo WH40KG Waterproof, Full Alu Case, ...
PowerHD Servo WH40KG Waterproof, Full Alu Case, ...
Servo WH40KG Waterproof, Full Alu Case, Digital HV (40 KG/0.17 SEC) Torque(6.0V): 29.0 kg-cm ( 402.7 oz/in) Torque(7.4V): 35.0 kg-cm ( 486.1 oz/in) Torque(8.4V): 40.0 kg-cm ( 555.5 oz/in) Speed: 0.20 sec (6.0V)│0.18 sec (7.4V)│ Speed: 0.17 sec (8.4V) Operating Voltage：6.0 ~ 8.4V DC Volts Weight: 82 g (2.89 oz) Bearing Type：Ball Bearing x 2 Motor Type：Coreless Motor Gear Type：Titanium & Steel Operating Temperature：-20℃~60℃ Working frequence：1520μs / 333hz Size：40.7 x 20.5 x 38.5 mm ( 1.60 x 0.81 x 1.52 in)

1.195,-

1.295,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png