Hopp til innhold
-5%

Castle Creation 010-0165-05 Mamba Monster X 3-8S 1520-1650KV V2 Sensor Combo

Art.nr: CC010-0165-05

5.895,-

6.195,-

- 5%
Castle Creations

Castle Creations

Kontakt oss for mer informasjon om dette produktet

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Castle Creation Mamba Monster X 3-8S 1520-1650KV V2 Sensor Combo

RACER TESTED - BASHER APPROVED

Experience higher efficiency, advanced features and improved optimization for your stock upgrade or build with Castle’s legendary brushless power.  The MAMBA MONSTER X 8S, 33.6V ESC W/1520-1650KV SENSORED COMBO is a perfect upgrade for 1/8, 1/7 and 1/6 scale vehicles weighing up to 18lbs and up to 8S LiPo. The 1520-1650Kv has all of the secret sauce that the big brother 1717-1650Kv has, but in a more compact diameter, fitting into smaller spaces without modifications to your chassis.

New 1520-1650Kv V2 motor now included!  Our commitment to progress is driven by our passion for unlocking untapped potential. We constantly challenge ourselves to find new ways to enhance our products which is why we are excited to share the newly redesigned 1520-1650Kv V2. The transformation has included several improvements, most contributed by new stator and rotor assembly upgrades that, in turn, allow for even HIGHER EFFICIENCY, REDUCED TEMPERATURES, AND SMOOTHER START-UPS!

MONSTER X 8S KEY FEATURES:

  • Input Voltage Range 2S-8S LiPo (3-8S in this combo)
  • Sensorless, Sensored and SmartSense™ Running Modes
  • Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
  • CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
  • ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer
  • Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
  • Oversized factory equipped thermally controlled 40MM cooling fan
  • Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
  • Waterproof design for all weather conditions
  • Data logging capability to capture and record performance data from your vehicle
  • Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
  • Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
  • Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
  • Easily tune and update ESC with USB and Bluetooth™ programming options
  • Castle Link USB programming kit (sold separately)
  • Optional smartphone-based programming with the B-LINK™ Bluetooth Interface (sold separately) and Castle Link app available on Google Play or Apple App Store

1520-1650Kv V2 MOTOR FEATURES: 

  • Input Voltage range: 3s-8s LiPo
  • Redesigned rotor and stator assemblies.
  • Reduced magnetic cogging, producing less residual drag brake.
  • Increased efficiency, resulting in lower temperatures and longer run times.
  • Smoother start-up, reducing cogging or stuttering when starting from a stop.
  • High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets
  • Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings
  • 10 AWG, High-Strand-Count Silicone-Insulated Wire w/6.5mm Bullet Connectors
  • High-Performance 0.2mm Steel Lamination Stacked Stator
  • Oversized, low-resistance, gold-plated solder tabs
  • Sensor board with High Quality Temperature-Stabilized Sensors
  • T6 Aluminum CNC Machines Front/Rear End bell

 


CC060-0075-00

Produsent

Castle Creations makes the best electronic speed controllers in the industry, possibly the world!  Our engineers have spent countless hours integrating features and firmware that no other manufacturers can match.

Speed Controllers enabled with SmartSense use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat.

Relaterte produkter

 

Art.nr: 011-0119-00
Copied
This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10* FEATURES Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs) Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Demo mode checks available settings without connecting device to computer Downloadable updates INCLUDES Castle Link V3 USB Programming Kit with Standard USB Cable COMMENTS *Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

379,-

439,-

** Ikke på lager
KJØP
-14%
Art.nr: 010-0165-02
Copied
Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / 1717-1650KV   MORE POWER - COOLER TEMPS - LONGER RUNS       Take your scale build or upgrade to the next level with Castle’s legendary brushless power. The MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMBO is a perfect upgrade for heavier 1:8th vehicles and lighter 1:6th vehicles weighing up to 20 lbs. and running up to 8S LiPo.   RACER TESTED - BASHER APPROVED   Drive fearlessly and punch that throttle! The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology CRYO-DRIVE™.  By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.  These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. High-performance demands high quality and this ESC was designed with durability in mind. Constructed around a robust aluminum casing, the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a workhorse, it will dominate in the harshest of environments. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional tuning flexibility awaits you with on-the-fly adjustments from your transmitter via the Auxiliary wire. Simply connect the white signal wire to an open radio channel, and enable the feature in Castle Link by selecting what Auxiliary function you would like to use. Access programming parameters such as Torque Control, Max Brake or Rock Race Mode. Optimize your vehicle for any racing or bashing application you can imagine! When paired with the newly released Castle 1717-1650KV, users with heavy, high speed rigs will experience controllable low-end ranges without sacrificing power, punch or speed.  SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Whether you are burning out, dropping the hammer, trigger happy, powering out, on-the rocks, off-the-rocks, wheeling or mud bogging - MAMBA MONSTER X 8S is ready to test the limits of your R/C car or truck.   FEATURES:   Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty MOTOR FEATURES:     4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs   MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMES WITH: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide

5.995,-

6.395,-

** Ikke på lager
KJØP
-6%
Art.nr: 060-0081-00
Copied
Motor Sensor Inrunner 4-pole 1717-1650KV 1/8-1/6 Castle 1717 1Y Sensored Motor - 1650Kv The Castle 1717 1650KV motor is a 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Updated modern and sleek design; looks as cool as it performs. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   Minimum Input Voltage : 3S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified Motor : No ROAR Certified Motor : No Specs: Input Voltage Range: 8S LiPo Max Kv: 1650 Max. RPM: 56,000 Size: Diameter: 47.6mm at fins, 46mm at can Length: 85.1mm Weight (w/wires): 597.6g (548g without wires) Shaft Size: Length: 20mm Diameter: 5mm Mounting Hole Specifications: M3 and M4 @ 25.4mm (1") Cooling Fan: N/A Connectors: 6.5mm male bullets Items Needed for Operation: Compatible Electronic Speed Control (ESC) (see Recommended ESC(s) below) Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty. Application Guidelines: The 1717-1650Kv is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Recommended ESC(s): Mamba Monster X 8S Max. Recommended Vehicle Weight: Vehicles weighing less than 20lbs. Tech Notes: Running modes: Sensorless and Sensored Application: Car Motor Type: Brushless kV Value: 1650 kV Motor diameter: 46 mm Motor length: 85,1 mm Shaft length: 20 mm Shaft Diameter: 5 mm Weight: 597,6 gram Max Rev.: 56000 rpm Connector: 6,5mm Bullet Max voltage: 88,8 V Special: Sensor-based    

3.195,-

3.495,-

På lager 1
KJØP
-9%
Art.nr: 060-0115-00
Copied
Description: This is Castle Creations 4-Pole Sensored Brushless 1520-1650KV V2 Motor For 1/6 1/7 1/8 RC Car.   Feature:   For: 1/6 1/7 1/8 RC Car Material: Metal Color: Green Input Voltage range: 3s-8s LiPo Redesigned rotor and stator assemblies. Reduced magnetic cogging, producing less residual drag brake. Increased efficiency, resulting in lower temperatures and longer run times. Smoother start-up, reducing cogging or stuttering when starting from a stop. High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings 10 AWG, High-Strand-Count Silicone-Insulated Wire w/6.5mm Bullet Connectors High-Performance 0.2mm Steel Lamination Stacked Stator Oversized, low-resistance, gold-plated solder tabs Sensor board with High Quality Temperature-Stabilized Sensors T6 Aluminum CNC Machines Front/Rear End bell Proudly Designed and Supported in Kansas, USA.   Specification:   Minimum Input Voltage : 3S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified Motor : No ROAR Certified Motor : No   Include:   Castle Creations 4-Pole Sensored Brushless 1520-1650KV V2 Motor (1 pc)

3.095,-

3.295,-

** Ikke på lager
KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png