Traxxas

-13%

Carson 907166 Gear Motor For Spindle Drive Fligel Stone Master

Art.nr: 907166

1.295,-

~~1.495,-~~

- 13%

Carson

Carson

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Spindle drive motor spesielt for Carson sin Fliegl stone master henger.

Produsent

Carson

Carson

Carson har mye til Tamiya Lastebiler.

Relaterte produkter

Hovedbilde Carson 907425 2 -Akslet Tipp Henger Kit

Hovedbilde Carson 907425 2 -Akslet Tipp Henger Kit

Carson 907425 2 -Akslet Tipp Henger Kit

Art.nr: 907425

Copied

En nydelig henger med tipp. (Elektrisk – OPTION) Tippsystem. Motor Lyskit Bare slik Carson kan lage den. Førsteklasses kvalitet fra hengerfeste til baklem. Dette er en henger for deg som virkelig vil pynte opp lastebilen din. Egenskaper: • Stålprofilramme (laserskjæring og lasersveiset) • Tipp er laget av Stiv PVC (grå) • 8 kulelager på hjul • Fulda Variotonn Wide Offroad-Dekk • 7-delt baklys (7 Seksjoner) • Trailer oppheng med dummy luftfjæring • Automatisk bakvegglåsing (2-kroker) Produkt info: Vekt 3000 g Høyde 200 mm Lengde 570 mm Bredde 190 mm skala 1:14

6.995,-

9.295,-

-25%

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Art.nr: 907216

Copied

The 3-axle Fliegl Stone Master tip-up truck is a precise and licensed scale copy of a real half-pipe for use on construction sites. With the optionally available tipper mechanism, the dump body can be tipped and unloaded. When the dump body is lowered, the tail gate is automatically secured with the 2 hook latches. Needed accessories: No 500907199 Gear engine seat post No 500907218 Seat post driven No 500907166 Gear engine spindle drive No 500907217 Spindle drive No 500907071 Light set for trailers Scope of delivery: Kit with detailed instructions Specifications: Length 660 mm Width 185 mm Height 235 mm Tire width 25 mm Tire Ø 82 mm Weight 7,000 g max . Payload 10.000 g

9.795,-

12.995,-

-25%

Kunder kjøpte også

Hovedbilde Carson 907070 Switch-Tipping Trailer Mechanism

Carson 907070 Switch-Tipping Trailer Mechanism

This switch may be used in conjunction with items 907066 (Gear motor lift spindle) and 907056 (Drivetrain for Truck Dumper). The switch will allow the user to control the lift of the Dumper truck bed easily.

229,-

249,-

-8%

Hovedbilde Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz

Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Aluminum Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

Hovedbilde Tamiya 85080 Spray Lacquer TS-80 Flat Clear 3 oz

Tamiya 85080 Spray Lacquer TS-80 Flat Clear 3 oz

Tamiya spray paint is a type of synthetic lacquer that cures quickly and is extremely useful for painting large surfaces. Each can contains 100ml of paint, which is enough to fully cover 2 to 3, 1/24 scale car bodies. Tamiya spray paints do not react with acrylics or enamels, so details can be added using any type of paint you desire.

109,-

Hovedbilde BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10

Hovedbilde BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10

BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10

WATER PROOF SPEEDCONTROLLER BRUSHED ESC for bil, SPRUTSIKKER DEANS KONTAKT WP1040 BRUSHED : Constant 45A Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 5V/2A

499,-

529,-

-6%

Hovedbilde Tamiya 87042 Surface Primer L Gray

Tamiya 87042 Surface Primer L Gray

This is a 180ml Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal. FEATURES Easy application. This light gray primer has excellent coverage and is recommended for use prior to painting a light color onto a darker colored material. It can be used on plastic or metal. Air spray can. Color coded plastic lid. INCLUDES One Can of Surface Primer L REQUIREMENTS Well Ventilated Area SPECIFICATIONS Contains: 180ml

139,-

Hovedbilde Savox SC-0251MG Plus Servo 16Kg 0,18s Metal Gear

Hovedbilde Savox SC-0251MG Plus Servo 16Kg 0,18s Metal Gear

Savox SC-0251MG Plus Servo 16Kg 0,18s Metal Gear

Savöx SC0251MGPLUS - Larger Standard Digital Servo - 0.18s/60° 16kg/cm @ 6V The Savox SC-0251MGP is a high torque, metal-geared, digital servo which is suitable for many applications. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Slightly taller case design Ideal for aircraft and some car applications Specifications: Torque @ 4.8v: 13kg/cm Torque @ 6v: 16kg/cm Speed @ 4.8v: 0.20s/60° Speed @ 6v: 0.18s/60° Dimensions L x W x H: 40.7 x 20 x 42.4mm Weight: 61g Operating Temperature: 14° - 122°F (-10° - 50°C) Running Current (no load): 300mA @4.8V, 350mA @6.0V Stall Current (at locked): 2600mA @4.8V, 3200mA @6.0V Idle Current: 5mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

459,-

499,-

-8%

Hovedbilde Tamiya 56505 Motorized Support Legs Tractor Trailer

Tamiya 56505 Motorized Support Legs Tractor Trailer

This is a Great Hop-Up to add Realism to your Tamiya King Hauler kit. INCLUDES: Two AA battery cases One RS-29 motor Two battery case connectors (these are used to connect the 2 battery cases) One battery terminal A One battery terminal B One tube of silicone grease (1/4 oz., for the gears) One coupler plate A One servo plate One switch plate One worm gear (acts kind of like a pinion) One 28 teeth / 12 teeth counter gear One 36 teeth / 10 teeth counter gear One 40 tooth gear Two return springs One inner spring Four rack springs One 2x67 mm threaded shaft One 2x50 mm threaded shaft One 3/4" x 4 3/4" double sided tape One 20x20 mm double sided tape One shift gate (used on the transmitter as a guide) Three nylon adjusters (a.k.a. 4mm ball cups) One 5x40 mm rubber tubing One 4-way wrench Two metal racks Two joint cups Two metal rack pinion Two pinion shaft Two 5mm washers Two 5x8 mm bronze bushings Two 3x7 mm bronze bushings One drive shaft One brass hex hub One hex wrench One brass rod nut One on/off switch Two coupler nuts Two 4 mm ball connectors Two 4 mm e-ring Four spring pins Four 3x3mm grub screw (a.k.a. hex screw) Two 2 mm e-rings Two 2 mm washers Five 2.5x8mm socket head cap screws Nine 2x8mm screws Thirteen 2x8mm screws Six 2 mm nuts Four 3x10mm flanged screws Two 3mm nuts Four 3x6mm flat head screws Two 3x8mm screws Three 3x8 mm self tapping screws Two gear box halves (black molded nylon) One trailer hitch (nylon) One hitch plate (nylon) Two nylon leg guides Two nylon swivel arms Two nylon mounting arms REQUIRES: One Standard Servo and Four "AA" size batteries.

899,-

949,-

-5%

Hovedbilde Carson 907218 Trailer Support Legs (Motorized)

Carson 907218 Trailer Support Legs (Motorized)

With the motorized support legs to give your CARSON 3-axle dump truck Fliegl Stone Master (907216) is a more prototypical function. To operate two geared motors 907199 needed. Technical Details: Aluminum and Steel

1.749,-

1.999,-

-13%

Hovedbilde Carson 907199 Support Legs Gearboxed

Carson 907199 Support Legs Gearboxed

This is the Support Legs Gearboxed Motor from Carson. Intended for use on the Carson 907218.

649,-

749,-

-13%

Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Savox SC-0254MGPLUS - Standard Sized Digital Servo with Soft Start 0.14sec 7.2kg/cm @ 6V The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Higher torque output than standard servos Ideal for 30-60 size aircraft, and some car applications Leading edge digital servo technology Strong 3-Pole Brushed motor Accurate and fast response Fine resolution Composite case Ball bearings Specifications: Torque @ 4.8v: 6.9kg/cm Torque @ 6v: 7.2kg/cm Speed @ 4.8v: 0.19s/60deg Speed @ 6v: 0.14s/60deg Dimensions: L40.7 x W20 x H39.4mm Weight: 49g Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V Idle Current: 6mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

389,-

419,-

-7%

Hovedbilde Carson 907071 Light set for Carson/ Tamiya trailers

Carson 907071 Light set for Carson/ Tamiya trailers

Passer til alle Carson trailere Beskrivelse Belysningssettet består af 2 printplater med hver 5 SMD LED, og passer til 7-kammer baklykterne på Carson's trailere. Sette innholder også adapterkabel mellom belysningen og Tamiya's MFC-01 styringsmodul til lastbiler. Sættet indeholder - 2 printplater med 5 SMD LED til 7-kammer baklyshus - Adapterkabel til MFC-01 - Kabel - Veiledning

1.095,-

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

The 3-axle Fliegl Stone Master tip-up truck is a precise and licensed scale copy of a real half-pipe for use on construction sites. With the optionally available tipper mechanism, the dump body can be tipped and unloaded. When the dump body is lowered, the tail gate is automatically secured with the 2 hook latches. Needed accessories: No 500907199 Gear engine seat post No 500907218 Seat post driven No 500907166 Gear engine spindle drive No 500907217 Spindle drive No 500907071 Light set for trailers Scope of delivery: Kit with detailed instructions Specifications: Length 660 mm Width 185 mm Height 235 mm Tire width 25 mm Tire Ø 82 mm Weight 7,000 g max . Payload 10.000 g

9.795,-

12.995,-

-25%

Hovedbilde Carson 907217 Spindle drive for Stone Master

Hovedbilde Carson 907217 Spindle drive for Stone Master

Carson 907217 Spindle drive for Stone Master

NB! Denne skal ha motor 907166 Product Description Spindle drive for Fliegl Stone Master, the toggle pin "Z bar" for the motorized drive of the trough gives the CARSON 3-axle dump trucks Fliegl Stone Master a more prototypical function. For Operating a geared motor required. Technical specifications: Material aluminum with steel bolts / shafts

3.095,-

3.595,-

-14%