Name: Carson 907034 License plate mount, prepared for illumination
Brand: Carson
SKU: 907034
Price: 199.00 NOK
Availability: OutOfStock

Carson 907374 1:14 Steel Grab Handle (2) Low Loader ...

Holdestang, laget av stål, sort oksidert. passer Carson Goldhofer 500907060 Innhold: 2 stk

295,-

** Ikke på lager

KJØP

Tamiya 19495346 Sticker for 56312 Volvo FH12

Tamiya Volvo Decals. En pakke med kun klistremerker, til Tamiya Volvo.

69,-

På lager 2

KJØP

Carson 501004 FS Reflex Stick Multi 14Ch LCD 2.4GHz

Reflex Stick Multi Pro LCD Professional, modern and technically high-quality. 14-Channel remote control system with 15 model memories for universial use in many RC vehicles and vessels. You controll these 14 channels independently by the means of 2 control sticks and 10 switches, which has many uses, such as light, sound, horn, winch, support legs, water pump and water monitor, to name a few. The Reflex Steck Multi Pro 14 channel LCD System is fully compatible with Tamiya multi-functionunits for Trailers, and Tamiya DMD units. Specs: Operating voltage transmitter: 4.8-6V (4 AA batteries) 2.4G FHSS-System (Frequency-hopping spread spectrum) 2.4G servo reverse (reversal of running direction) and trimming function for channels. 4x button ON/OFF/ON, 4x switch ON/OFF/ON, 2x rotary potentiometer Power supply to the receiver: 4.8-6V Plug system Graupner J/R Dual rate for steering (path limitation of the servos EPA (servo travel limit) ABS function EXP (exponential) failsafe function What`s in the package: 1x 14 channel transmitter 1x 14 channel receiver 1x manual

1.895,-

2.595,-

** Ikke på lager

KJØP

-27%

Carson 907086 1:14 Decal sheet truck warning symbols

299,-

329,-

På lager 2

KJØP

-9%

Tamiya 56523 MFC-03 - Truck "Euro Style"

The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism. •Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. •Up to 21 actions can be controlled using a 4-channel transmitter. Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility. •Light operation and volume adjustment are also possible using the transmitter. •Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. •An ESC has been built in to the unit, enabling realistic running at very low speeds. •The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. •Can be used for support leg operation when employing Item 56505 Motorized Support Legs. •Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02 LED light units. •Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505). Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility.

3.595,-

4.395,-

På lager 1

KJØP

-18%

Carson 907076 Roof light holders Volvo

Top light bracket Volvo For Tamiya Volvo FH12 Globetrotter 420 (56312).

1.049,-

På lager 3

KJØP

Tamiya 56319 1/14 3-Axle Reefer Semi Trailer Kit

This is the 3-Axle 1/14 scale Reefer Semi Trailer Kit from Tamiya. FEATURES: Can be hitched to any of Tamiya's 1/14 scale tractor trucks Opening doors with anodized aluminum trailer panels Three axle suspension with refrigeration detail (refrigeration is non-functional) underbody storage areas and rear bumper Frame constructed of black colored anodized aluminum with resin cross members Compatible with options such as the Semi Trailer Light Set ( Tractor Truck Oil Shocks (TAMC0653) and Motorized Support Legs INCLUDES: 3-Axle 1/14 scale Reefer Semi Trailer Kit with decals and illustrated instruction manual REQUIRES: Tools and paint SPECS: Finished size not given by manufacturer

5.895,-

6.595,-

Ikke på lager

-11%

Carson 907050 3-axle dumper semi-trailer

The CARSON dumper semi-trailer in scale 1:14.5 is a detailed model of the dumpers, used in the local traffic of construction sites. Load up your dumper semi-trailer and off you go with a truckload of sand, flint or stones to the next construction site or a stone pit. With the separately availabe dump-mechanics (spindle drive with shaft joint Item 907056) the basin can be dumped respectively the load unloaded. After lowering of the basin, the back wall is secured automatically with a 2-hook locking. Technical Details: Basin and back wall made of reinforced PVC, CNC-milled suspension of GFK with horizontal rods air-spring dummy (screw springs) aluminium chassis CNC-milled 12 ball-bearings 6 trailer rims wide 6 wide tires for trailer rims 7-chamber tail lights license plate mount lightened plastic fenders with mount automatical 2-hook back wall locking aluminium underbody protection CNC-milled trailer supports mechanically adjustable support plastic/metal composite construction CNC-milled hydraulic cylinder dummy Measurements (L x W x H) 700 x 185 x 235 mm tire width 25 mm tire outer-Ø 82 mm weight 4.600 g max. load approx. 10.000g

8.295,-

10.995,-

** Ikke på lager

KJØP

-25%

Tamiya 56505 Motorized Support Legs Tractor Trailer

This is a Great Hop-Up to add Realism to your Tamiya King Hauler kit. INCLUDES: Two AA battery cases One RS-29 motor Two battery case connectors (these are used to connect the 2 battery cases) One battery terminal A One battery terminal B One tube of silicone grease (1/4 oz., for the gears) One coupler plate A One servo plate One switch plate One worm gear (acts kind of like a pinion) One 28 teeth / 12 teeth counter gear One 36 teeth / 10 teeth counter gear One 40 tooth gear Two return springs One inner spring Four rack springs One 2x67 mm threaded shaft One 2x50 mm threaded shaft One 3/4" x 4 3/4" double sided tape One 20x20 mm double sided tape One shift gate (used on the transmitter as a guide) Three nylon adjusters (a.k.a. 4mm ball cups) One 5x40 mm rubber tubing One 4-way wrench Two metal racks Two joint cups Two metal rack pinion Two pinion shaft Two 5mm washers Two 5x8 mm bronze bushings Two 3x7 mm bronze bushings One drive shaft One brass hex hub One hex wrench One brass rod nut One on/off switch Two coupler nuts Two 4 mm ball connectors Two 4 mm e-ring Four spring pins Four 3x3mm grub screw (a.k.a. hex screw) Two 2 mm e-rings Two 2 mm washers Five 2.5x8mm socket head cap screws Nine 2x8mm screws Thirteen 2x8mm screws Six 2 mm nuts Four 3x10mm flanged screws Two 3mm nuts Four 3x6mm flat head screws Two 3x8mm screws Three 3x8 mm self tapping screws Two gear box halves (black molded nylon) One trailer hitch (nylon) One hitch plate (nylon) Two nylon leg guides Two nylon swivel arms Two nylon mounting arms REQUIRES: One Standard Servo and Four "AA" size batteries.

899,-

949,-

På lager 1

KJØP

-5%

Tamiya 56312 1/14 VOLVO FH12 Globetrotter 420

The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Specifications Scale: 1/14 Length: 17.32 inches (440mm) Width: 7.40 inches (188mm) Wheelbase: 10.71 inches (272mm) Front Tread: 6.14 inches (156mm) Rear Tread: 5.43 inches (138mm) Weight: 5.07 lbs. (2300g) Chassis: Aluminum ladder Suspension: Solid Axle Damper Type: Metal friction Drive Train: Gearbox (3-speed) Gear Ratio: 10.6:1 - With the 3-speed gearbox, 10.6:1, 17.7:1 and 32.4:1 are possible Differential Type: Bevel Gear Engine: Electric 540 Wheels & Tires: Chrome/Radial Body Type: Styrene(plastic) Radio Control Unit: (not included) Can be operated with a 2-channel radio but a 4-channel system is recommended for potential future options. Battery: Requires a 7.2V battery and charger Spare Parts & Hop Up Options 56501 - Tractor truck electrical unit set 56503 - Tractor truck oil shocks 56507 - Telescopic antenna 56508 - Truck aluminum front wheels (1 pair) 56509 - Truck aluminum rear wheels (1 pair) 56510 - Tractor truck sound effects set

4.395,-

4.695,-

På lager 2

KJØP

-6%

Tamiya 56502 1/14 Semi-Trailer Light Set

This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (56302) that is used with the Tamiya King Hauler (56301). FEATURES: These lights are for brake lights (one left and one right) and turn signal (or "blinker") lights (one left and one right). The bulbs are clear and installed behind the brake and turn signal lenses (just like a real car/truck). INCLUDES: One Light Set: Brake and blinker lights, light cable (that runs the length of the trailer) and plug (to plug into connector cable). One Connector Cable: Connects the light set to the circuitry board on the tractor (the circuitry board is included in the tractor light set). One Rubber Bushing: To protect the light cable where it passes throught the front of the trailer. One Plastic Bushing: To protect the light wires where they pass through the floor of the trailer to the rear bumper. Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting the plug receptacle in the tractor body. One Double-Sided Tape One Illustrated instructions REQUIRES: This light set is powered by the 6-cell motor battery in the tractor. Must use the Tractor Lights 56501 also to make functional.

529,-

569,-

På lager 3

KJØP

-7%

Carson 907161 1:14 Air Horn Set MB Actros

Aluminiums horn sett til MB Actros. Kunststoff

569,-

** Ikke på lager

KJØP

Castle Creations CC BEC 10A 6S Switching Regulator

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack Draws higher voltage from the motor batteries and drops it to a voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS: Length: 1.2" (30mm) Width: .6" (15mm) Height: .4" (10mm) Weight: .4oz (11g) Input voltage: 5V to 25.2V (2S to 6S LiPo) Current output: 12 volts input = 7 amps* continuous, 10 amp peak; 24 volts input = 5 amps* continuous, 7 amp peak *Ratings are determined with a 5mph airflow on the BEC Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately) Default voltage is 5.1V

399,-

449,-

** Ikke på lager

KJØP

-11%

Tamiya 19465765 SCREW BAG A FOR 56323

SCREW BAG A Fits Tamiya 56323 1/14 Scania R620 6x4 Highline Tractor Truck Kit

189,-

** Ikke på lager

KJØP

Tamiya 10005563 A-parts

A-Parts (A1 & A2) for 56318/56321 Scania R470 and 56335 Actros Passer: Tamiya 56332 MAN TGX 18.540 RED

199,-

** Ikke på lager

KJØP

Carson 13512 TRUCK LAMPS

Suitable for all Tamiya trucks. Content: 5 items

129,-

** Ikke på lager

KJØP

RC4WD 0210 OEM Stamped Steel 1.9 Beadlock Wheels Black

This is a quantity of four RC4WD OEM Stamped Steel 1.9" Beadlock Wheels. FEATURES Stamped steel construction, black in color Fits standard 12mm hex Fits optional hubs Z-S0530, Z-S0779, Z-S0780 and Z-S0774 with the use of Z-S0239 12mm Axle Wheel Hexes INCLUDES Four Stamped Steel 1.9" Beadlock Wheels in Black Twenty four M2.5 x 8mm Socket Head Cap Screws Two M2.5 x 14mm Socket Head Cap Screws REQUIREMENTS 1.9" Tires SPECIFICATIONS Wheel Size: 1.9" (48.3mm) Outer Diameter: 1.9" (48.3mm) Width: 0.96" (24.3mm) Center Hole Outer Diameter: 0.17" (4.2mm) Negative Offset: 0.31" (7.9mm) Weight: 2.15oz (61g) per wheel

799,-

På lager 2

KJØP

TAMIYA 54114 CR TUNED MOTOR 35T

When rock crawling, it is very important to have a motor that provides the appropriate amount of torque required, to give you more control over the vehicle. Tamiya is releasing the CR-Tuned Motor (35T) to meet the needs of all Rock Crawlers. About the Model CR-Tuned Motor (35T) x 1 Can be used with every CR-01 chassis vehicle. Can also be used with big tire trucks, touring cars, and M-chassis vehicles (Great for beginners)

399,-

På lager 3

KJØP

RC4WD T0031 Hauler 1.7" Commercial 1/14 Semi Truck ...

This is a pair of RC4WD Hauler 1.7" Commercial Semi Truck Tires. FEATURES Fits all 1/14 scale RC4WD & Tamiya tractor semi truck wheels X5 hard compound Mini rib sipes for absorbing rib edge stresses Superior traction on wet surfaces Fits the RC4WD Diesel, Force and General front and rear wheels, and the RC4WD Boulder rear wheels INCLUDES Two Hauler 1.7" Commercial Semi Truck Tires and Foam Inserts REQUIREMENTS Tire Glue SPECIFICATIONS Outer Diameter: 3.28" (83.5mm) Width: 0.87" (22mm) Inner Diameter: 1.71" (43.5mm) Weight: 1.2oz (34g) each tire

159,-

** Ikke på lager

KJØP

Tamiya 85029 Spray Lacquer TS-29 Semi-Gloss Black 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Semi-Gloss Black Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

På lager 7

KJØP

Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Aluminum Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

På lager 6

KJØP

Carson 13513 Truck horns and rearview mirrors

Truck horns and rearview mirrors Suitable for all Tamiya trucks. Content: 2 horns and 2 rearview mirrors

149,-

** Ikke på lager

KJØP

Carson 907063 Aluminium ramme 1 meter lang 2 stk

Technical Data: height 21 mm width 7 mm thickness 1,5 mm length 1 m

399,-

429,-

** Ikke på lager

KJØP

-7%

Tamiya 56511 1/14 Tractor Truck MFC-01 Control Unit ...

This is the Tamiya Tractor Truck Multi-Function Control Unit (MFC) with integrated Electronic Speed Control. For use on Tamiya 1/14 scale R/C tractor trucks and the #56307 Mercedes 1850L delivery truck. FEATURES: Twenty four radio-controlled sounds including, alarms, engine starting idling and revving, coupler attachment, air brake and more Nine different types of lights and vibration synchronized with engine sounds including, head and tail lights, turn signals, speed indicators, fog, roof, hazard, auxilliary, and back-up lights Special Operations add five extra features including, engine stop/ start switching, horn/support leg switching, light on/off switching turn signal/hazard lamp switching, and running/revving switching 2-3/8" (60mm) diameter speaker emits authentic sounds Electronic speed control enables low speed running for semi coupling Coupler unit controls sound for loading and unloading of trailer, speed control raises power during towing mode Control unit for volume and light adjustment Vibration unit uses specialized vibration motor with two types of counterweights INCLUDES: One Tamiya Tractor Truck Multi-Function Control Unit with speaker, pre-wired lights, vibration, coupler, control units, electronic speed control and instructions REQUIRES: Tamiya tractor trailer using four channel stick radio, two channel pistol grip radio with steering wheel will not operate unit. COMMENTS: Designed to be used with four channel stick control radios with self- neutral system such as those from Futaba, JR, or ACOMS. Different brands of radios may not operate unit at maximum efficiency.

3.695,-

4.295,-

Ikke på lager

-14%

Tamiya 56519 Metal-Plated Wheel 30mm Hex Hub Matte ...

This is the pair of Semi Truck Metal Plated Wheels from Taimiya. FEATURES: Fits Tamiya 1/14 scale semi truck kits with 30mm wide tires Plastic construction silver in color INCLUDES: Two Semi Truck Metal Plated Wheels with Front Inserts REQUIRES: Two 5x11mm ball bearings to attach to axle SPECS: Diameter: 1.7" (44mm) Width: 0.98" (25mm) COMMENTS: An identical style wheel set #56520 requires 5x11mm ball bearings in the hub design

99,-

På lager 4

KJØP

Carson 907034 License plate mount, prepared for illumination

Informasjon

Produsent

Carson

Kunder kjøpte også

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Carson 907034 License plate mount, prepared for illumination

Informasjon

Produsent

Carson

Kunder kjøpte også

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys