Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / BSD Biler / BSD 706T 1/10 MONSTER TRUCK / BSD 908-006 Front Bumper Bottom Bracket

BSD 908-006 Front Bumper Bottom Bracket

Art.nr: 908-006

59,-

BSD

BSD
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Front Bumper Bottom Bracket

Produsent

BSD

BSD

Kunder kjøpte også

Hovedbilde BSD 903-026 FR. CHASSIS
BSD 903-026 FR. CHASSIS
FR. CHASSIS

55,-

KJØP
Hovedbilde BSD 903-098 Diff. Gearbox Bulkhead-Upper/Lower
BSD 903-098 Diff. Gearbox Bulkhead-Upper/Lower
Diff. Gearbox Bulkhead-Upper/Lower

49,-

KJØP
Hovedbilde Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

75,-

KJØP
Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Hovedbilde BSD 909-001 Spur Gear Unit
BSD 909-001 Spur Gear Unit
Spur Gear Unit

399,-

KJØP
Hovedbilde BSD 903-025 Suspension arm pin long
BSD 903-025 Suspension arm pin long
SUSPENSION ARM PIN-LONG

49,-

KJØP
Hovedbilde BSD 903-024 FRONT SUSPENSION ARM PIN-SHORT
BSD 903-024 FRONT SUSPENSION ARM PIN-SHORT
FRONT SUSPENSION ARM PIN-SHORT

39,-

KJØP
Hovedbilde BSD 801-008 FR/RR BODY MOUNT
BSD 801-008 FR/RR BODY MOUNT
FR/RR BODY MOUNT

49,-

KJØP
Hovedbilde Traxxas 3934A Body Clips Heavy Duty Black (12)
Traxxas 3934A Body Clips Heavy Duty Black (12)
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
Hovedbilde BSD 701-004 Shock Absorber Unit (Plastic) 2Pcs
BSD 701-004 Shock Absorber Unit (Plastic) 2Pcs
Shock Absorber Unit (Plastic) 2Pcs

159,-

179,-

KJØP
-11%
Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP
Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor
Traxxas 3351R Velineon 3500 Brushless Motor
This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power           Optimized for 1/10th scale vehicles           Ultra high temp sintered neodymium motor magnets           12-gauge motor wire with gold-plated bullet connectors           Efficient, high-speed ball bearings           Consistent, high-power output           Precision-balanced rotor           Solder tabs with protective end caps           Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS:    Type: Sensorless Brushless           RPM/volt: 3500 (10-turn)           Wire size: 12-gauge Maxx Cable           Max RMP: 50,000           Weight: 9.24 oz (262g)           Current Ratings: 65A constant / 100A peak/burst           Magnet type: Ultra High-Temp. Sintered Neodymium           Connection type: Solder tab / TRX 3.5mm Bullet

1.195,-

1.295,-

KJØP
-8%
Hovedbilde Absima 2440013 Body Clips Medium Silver (10)
Absima 2440013 Body Clips Medium Silver (10)
 Body Clips Medium Silver (10)

59,-

KJØP
Hovedbilde RPM 80514 Rod Ends Long Green Traxxas replace TRX 5525
RPM 80514 Rod Ends Long Green Traxxas replace TRX 5525
RPM Long Rod Ends for most Traxxas 1/10 Scale Vehicles - Green replaceS Traxxas stock #5525 Quick Notes: RPM long rod ends replace Traxxas stock #5525 Requires stock Traxxas pivot balls The same engineering that made RPM Rod Ends for Associated and Losi vehicles some our best selling RPM parts for over 2 decades has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4×4, Summit, T-Maxx, E-Maxx, Revo, e-Revo, Slayer Pro 4×4, Stampede 4×4, Rustler 4×4, Rustler VXL, Jato and Bandit VXL. Tech Notes: RPM long rod ends replace Traxxas stock #5525. Sold without pivot balls. Stock Traxxas pivot balls are required for completion.

129,-

KJØP
Hovedbilde BSD 903-105 DRIVING/DRIVEN GEAR, DIFF.GEAR/BEVEL GEARS
BSD 903-105 DRIVING/DRIVEN GEAR, DIFF.GEAR/BEVEL GEARS
DRIVING/DRIVEN GEAR, DIFF.GEAR/BEVEL GEARS

149,-

KJØP
Hovedbilde Absima 2440014 Body Clips Large/Silver (10 PCS)
Absima 2440014 Body Clips Large/Silver (10 PCS)
BODY CLIPS LARGE/SILVER (10 PCS)       (14)

49,-

KJØP
Hovedbilde RPM 80125 Rear Bumper Blue Slash 4X4 Replaces TRX 6836 ... Hovedbilde RPM 80125 Rear Bumper Blue Slash 4X4 Replaces TRX 6836 ...
RPM 80125 Rear Bumper Blue Slash 4X4 Replaces TRX 6836 ...
RPM Rear Bumper for Slash 4×4 - Blue Replaces stock Traxxas #6836 Quick Notes: Replaces stock Traxxas #6836 Optional Mud Flaps are available Optional Low Visibility Wheelie Bars are available Optional Spare Tire Carrier is available Optional Tail Light Set is available The 4×4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, we’ve made it even better! Our new rear bumper is modeled after full-sized short course and desert racing trucks for authentic scale realism, utilizing the same great looking rear bumper as that found on the 2wd version of the RPM rear bumper and making the most of an all-new bumper mount design specifically for the 4×4. This new mounting system has the perfect blend of rigidity and flexibility to absorb those nasty rear collisions without transferring huge amounts of impact energy into the more fragile components of the chassis. Additionally, with its twin hinge point mounting system, rear A-arm maintenance is a snap. Simply remove the two bottom-mounted flathead screws and the bumper swivels out of the way for easy access to the rear A-arms! It even allows the rear sway bar to stay in place! We incorporated a thicker skid plate design that does a fantastic job of protecting the rear end and lower mounting screws from harsh conditions such as gravel and asphalt impacts. The RPM lower mount / skid plate is over 35% thicker than the stock version! What more could we do to make these things incredibly realistic? How about mounting points for mud flaps and RPM tail light kits already widely available? That’s right; these bumpers come stock with mounting positions for RPM mud flaps (RPM #81012 available separately) and RPM Tail Light Kits (RPM #81030 also available separately). If you haven’t seen a Slash with a full set of LED’s running at night, you’re missing out! RPM rear bumpers for the Traxxas Slash 4×4 are available in three popular color options – black, blue and chrome on gray. RPM rear bumpers are sold with all necessary hardware and complete mounting instructions.

199,-

KJØP
Hovedbilde RPM 80625 Nerf Bars Blue (Pair) Slash 2WD/4x4 (not ...
RPM 80625 Nerf Bars Blue (Pair) Slash 2WD/4x4 (not ...
RPM Nerf Bars for the Traxxas Slash 2WD & Slash 4×4 - Blue Replaces stock Traxxas #5823 Quick Notes: Replaces stock Traxxas #5823 Not compatible with LCG versions of either the Slash 2WD or the Slash 4×4 LCG Slash 4×4 & Rally 4×4 Nerf Bars are also available Nerf bars play an extremely important function in the overall durability of a Short Course racer by protecting the sides of the chassis and fragile body of the truck. A weak nerf bar can expose the body and chassis to severe impact damage from side impacts, roll over’s and T-bone crashes, just to name a few. RPM has once again stepped up to make the most durable and well-designed nerf bar for the Traxxas Slash and Slash 4×4. The RPM nerf bar eliminates the stock hook-over-the-chassis that supports the nerf bar and replaced it with a structural cross rib running parallel to the chassis for optimum rigidity and anti-deformation characteristics. By eliminating the hook, installation is easier; the nerf bar doesn’t have to be deformed to get it in position and the nerf bar no longer pulls on the side of the chassis when it takes a hit. We also switched to a full round radius in the compression area of the nerf bar. The stock trapezoidal shape forces too much impact energy into the tiny corner radii near the body support area, usually ending in a break. The RPM nerf bars’ full corner radii are huge in comparison and allow a progressive compression of the nerf bar while distributing the impact energy over a much larger area, preventing breakage by design. Our design element changes, coupled with the best impact absorbing material in the R/C industry, make RPM nerf bars the best Slash and Slash 4×4 nerf bars available! Tech Notes: RPM Nerf Bars are only tested and guaranteed to fit the stock Traxxas Slash and Slash 4×4 chassis. They are not compatible with LCG versions of either the Slash 2WD or Slash 4×4.

79,-

KJØP
Hovedbilde RPM 80025 Front Bumper & Skid Plate Blue Slash 4X4 ...
RPM 80025 Front Bumper & Skid Plate Blue Slash 4X4 ...
RPM Front Bumper & Skid Plate for Slash 4×4 - Blue Replaces stock Traxxas #6835 Quick Notes: Replaces stock Traxxas #6835 A matching rear bumper is also available Optional Light Canister Set is also available When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!

199,-

KJØP
Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
Hovedbilde Castle Creations 5.5mm Bullet Connector 13G/10G ...
Castle Creations 5.5mm Bullet Connector 13G/10G ...
   These are the 5.5mm High Current Bullet Connectors from Castle Creations. FEATURES: Gold plated           Fits wire diameter up to 4mm           Use 13 gauge to 10 gauge wires           Up to 150A current INCLUDES: Three sets of bullet connectors REQUIRES: Solder and soldering iron SPECS:    Length: .66" (17mm)           Diameter: .15" (4mm) inside (where the wire is soldered to)           Diameter: .21" (5.5mm) outside

179,-

KJØP
Hovedbilde BSD 903-018 Fr.Lower Susp.Arm-LF/RT
BSD 903-018 Fr.Lower Susp.Arm-LF/RT
 Fr.Lower Susp.Arm-LF/RT

69,-

KJØP
Hovedbilde BSD 903-020 DIFF. GEARBOX UNIT
BSD 903-020 DIFF. GEARBOX UNIT
DIFF. GEARBOX UNIT

329,-

349,-

KJØP
-6%
Hovedbilde Carson 907186 1/14 Drivers figure
Carson 907186 1/14 Drivers figure "Robert"
1/14 Drivers figure "Robert"

125,-

145,-

KJØP
-14%
Hovedbilde Yeah Racing YA-0621RD 1/10 Scale Accessory Car Tow ... Hovedbilde Yeah Racing YA-0621RD 1/10 Scale Accessory Car Tow ...
Yeah Racing YA-0621RD 1/10 Scale Accessory Car Tow ...
Yeah Racing 1/10 Scale Accessory Car Tow Hook 5pcs Description: Add scale realism to your 1/10 on-road race or drift body with these anodized red tow hooks! Secured on the back with a body clip used for 1/10 bodies for a tight and secure fit!     Features: For: 1/10 Onroad Bodies Material: Aluminum Color: Red   Includes: Tow Hooks (5 pcs)

79,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png