Hopp til innhold
Hjem / Tilbud

Tilbud

Hovedbilde Heng Long 3889-1PRO Battle Tank 1:16 - Leopard 2 A6 ... Hovedbilde Heng Long 3889-1PRO Battle Tank 1:16 - Leopard 2 A6 ...
Heng Long 3889-1PRO Battle Tank 1:16 - Leopard 2 A6 ...
Art.nr: 3889-1Pro
Copied
Leopard 2 A6 Pro - en detaljert og tøff stridsvogn, full av funksjoner. Utstyrt med metalldeler, airgun, IR-kampsystem, rekylfunksjon og røyksystem for spennende og realistisk action. Lydmodulen forsterker opplevelsen ytterligere. Den medfølgende 2.4G radiosenderen sørger for stabil kontroll og gjør det mulig å kjøre flere stridsvogner samtidig uten forstyrrelser. Med flere battle tanks i drift samtidig kan man gjennomføre spennende slag ved hjelp av IR-battle modus. Dette lar modellene skyte på hverandre og responsere på treff med LED-lys, blink og spillmodus. Med airgun-modus skyter du fysiske 6mm BB-kuler.   Full bevegelighet Beltedriften gir modellen full bevegelighet i alle retninger. I tillegg kan kanontårnet roteres 320 grader og kanonen tiltes opp/ned.   Medfølger i pakken Med i pakken følger 1:16 tanks med 2.4Ghz radiosender. En pakke med ca. 200x BB-kuler, bruksanvisning og blink. Det følger også med en pakke med detaljer og dekaler som ved montering gjør modellen ekstra realistisk. Modellen er utstyrt med en 7.4V 1800mAh batteripakke med XT60-kontakter. Dette gir god kjøretid. Medfølgende USB-lader med ladestyrke på 800mAh gir en ladetid på rundt to timer. Du finner også en flaske olje for bruk i røykgeneratoren*. Alt du behøver for å komme i gang medfølger i pakken, utenom 6stk. AA batterier til senderen.   Denne versjon og options Heng Long Leopard 2 A6 finnes i flere varianter, og enkelte av bildene kan derfor avvike noe fra produktet som leveres. Dette er versjon 3889-1 PRO som leveres her. Denne utgaven er utstyrt med girboks med stålgir, justerbar beltespenning samt solide opphengsarmer for beltehjulene.Metallbelter og metalldrivhjul, fullstendig kulelagret og kanon rekyl. Både beltehjul og beltene er i metall.   Spesifikasjoner Skala 1:16 Lengde ca. 690mm Bredde 240 mm Høyde 190 mm Radiosystem 2.4Ghz Batteri 2s 1800mAh Li-Ion XT60   Hensyn Vis hensyn ved bruk. Produktet skyter fysiske 6mm plastkuler. Skuddkraften er kraftig nok til at dette kan gjøre skade om de treffer f.eks øyne. Man skal ikke under noen omstendigheter skyte mot mennesker, kjeledyr eller andre levende vesen. Vær oppmerksom, vis hensyn og pass på å bruke produktet på egnet og trygt område. PS! Røykgeneratoren tåler ikke å tørrkjøres, så ikke benytt røykfunksjonen om ikke det er kontrollert og etterfylt røykolje.

4.995,-

5.295,-

KJØP
-6%
Hovedbilde Hobbywing 38010602 EzRun Combo MAX5 HV G2 - 56118SD ...
Hobbywing 38010602 EzRun Combo MAX5 HV G2 - 56118SD ...
Art.nr: HW38010602
Copied
EZRUN MAX5 HV G2 Sensored Brushless ESC & 56118SD G2 800KV Motor Combo - 8-12S LiPo 12S HV ESC, enhanced performance The Max5 HV G2 ESC is designed to work in full-sensored mode at all times when it is paired with HOBBYWING EZRUN 56118 G2. The ESC supports up to 12s LiPo with a maximum output current of up to 250A. The strong explosive, stable output power, together with an excellent low-speed linearity, ensures the ESC meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. Intelligent freewheeling technology - Strong drive & Low temperatures The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency. With the addition of super-high power design, operating temperature is drastically lowered (approximately 30 degrees) to improve overall stability and reliability of the ESC. Note: Under heavy load conditions, the temperature of MAX5 HV G2 is only slightly higher than that of MAX4 HV. High protection level, all-weather operation The IP-67 waterproof rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Capacitor upgrade - More secure protection Compared with the previous generation (MAX5 ESC), the total capacity of the capacitor has increased by 45% (1260uF). The super large capacity ensures that 5th scale models do not need external capacitors. In addition, the built-in capacitor thermal protection function of the ESC is always in safe operating state. Powerful BEC The ESC has a built-in super BEC with a maximum output current of up to 25A. The output voltages are switchable between 6V/7.4V/8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Built-in anti-spark design - Multi-directional protection The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-12S), and avoids any injuries. Perfect combination with EZRUN 56118 SD G2 motor Achieve the perfect compatibility when used together with EzRun 56118 SD G2 motors. Avoid damaging the motor from overheating with the software protection function. Note: Non-Hobbywing EzRun 56118 SD G2 motors cannot realize motor overheat protection Record and store data in real time to keep track of the running status Connect the ESC to the OTA Bluetooth module, and through the mobile phone APP, you are able to view real-time data and operating status such as; throttle, voltage, current, temperature, speed, etc. Note: Due to the Bluetooth transmission distance, the effective distance is only about 5m! New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the ESC protection level and solves waterproof problems faced by traditional interfaces. Please Note: This ESC supports sensored motors with common interfaces. Sensor wire needs to be purchased separately! ESC Specs: Type: 1/5, Brushless, Sensored, WP ESC Cont./Peak Current: 250A/1600A Input Voltage: 6-12S LiPo BEC Output: 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) Input Wires: 8AWG-200mm Input Connectors: No Input Connectors: 8.0mm Bullet Connectors (Female) Firmware Upgrade: Supported Size: 94.5x59.4x50.9mm Weight: 428.5g (Included input wires) Motors: 56118 size motors Vehicles: 1/5 Truck & Buggy. Examples: Losi DBXL-E, Losi 5T Electrified, ARRMA Kraton 8S & ARRMA Outcast ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Independent programming port Sensored mode - Enhanced performance The motor is strong, explosive, and has a stable output power with an excellent linearity at low speed to allow the vehicle to easily realize various maneuvers. The control is easy when there power is limitless be it violent start-up, straight-line high-speed, flying slopes, etc. The perfect match for EzRun MAX5 HV G2 ESC The motor achieves perfect compatibility when used together with the EzRun MAX5 HV G2 ESC. The ESC/Motor combination is sensored and provides a smooth and precise control experience to the users. It is equipped with overheat thermal protection function to avoid overheating the motor. High protection level - All-weather operation IP67 Rating provides excellent waterproof and dustproof performance, and can easily cope with various weather conditions and harsh environments. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak it for a long time to avoid damaging the product. New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the motor protection level and solves waterproof problems faced by traditional interfaces. Detachable modular design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for daily cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/5, Brushless, Sensored Motor Poles: 4 KV Rating: 800KV LiPo Cells: 8-12S LiPo No-load Current: 6.9A O.D.: 56mm Length: 119.2mm Shaft Diameter: 8mm Connectors: 8mm Male Weight: 1272g Front Bearing: OD22 x ID8 x T7mm Rear Bearing: OD19 x ID8 x T6mm ESC: EZRUN MAX5 HV G2 Vehicles: 1/5 Buggy & Truck. Examples: Losi DBXL-E & Losi 5T Electrified

5.395,-

5.795,-

KJØP
-7%
Hovedbilde Radiolink RC8X RC Transmitter with 2x R8FG Receiver Hovedbilde Radiolink RC8X RC Transmitter with 2x R8FG Receiver
Radiolink RC8X RC Transmitter with 2x R8FG Receiver
Art.nr: RLRC8X-1
Copied
RadioLink RC8X 8-channel radio with 2 R8FG receivers The RadioLink RC8X is an advanced 8-channel transmitter for RC cars, boats and robot projects, combining a 4.3-inch full-colour IPS touchscreen, fast response, flexible model management, voice prompts, FPV functions and wide receiver support. This version ships with two R8FG receivers that have an integrated gyro, IPX4 splash protection and built-in real-time telemetry – a great fit if you want a powerful radio system for several models from the start. 8-channel transmitter for cars, boats and robots Comes with 2 R8FG receivers with an integrated gyro 4.3-inch IPS touchscreen in full colour with 800 x 480 resolution Up to 600 metres of range on the ground under optimal conditions Response down to 3 ms with the right receiver, firmware and protocol Model memory for up to 200 groups 8 groups of programmable mix control Customisable voice prompts The display can also be used for FPV viewing with an external 5.8 GHz receiver module DSC port for simulator, FPV head tracking or TBS Crossfire Support for multiple languages USB Type-C for upgrading or power supply Advanced platform for smart RC systems The RC8X uses a more advanced architecture than traditional transmitters, built on ARM9 and ARM7 with a 720 MHz main frequency and 32 MB RAM, combining clear display interaction, quick menu handling and stable remote control in one fast, responsive radio system. 4.3-inch full-colour IPS touchscreen The 4.3-inch full-colour IPS touchscreen has 800 x 480 resolution and a backlight for a clear view of menus, settings and functions with fast navigation, and the narrow bezel and touchscreen interface make the RC8X more modern and easier to use than transmitters with only buttons and small LCDs. Rich connectivity options The RC8X has several connections and functions for setup, FPV, simulator use and expansion alike. Port for an FPV display holder Memory expansion up to 64 GB DSC port for the simulator function FPV head tracking function Support for TBS Crossfire via the DSC port USB Type-C for upgrading or power supply 3.5 mm headphone jack DSC port for simulator, FPV head tracking and TBS Crossfire The DSC port can be set up for simulator use with VRC Pro, CarX and Assetto Corsa Competizione, for FPV head tracking with selectable 3-axis or 2-axis tracking, or with TBS Crossfire when a longer control range is desired. Stable control with up to 600 metres of range FHSS spread spectrum technology with 67-channel pseudorandom frequency hopping gives strong interference protection within and between frequency bands, with up to 600 metres of range on the ground under open, interference-free conditions – suitable for off-road, bashing, boating and other applications where a stable signal matters. Response down to 3 ms The selectable response time is 14 ms, 4 ms or 3 ms; 14 ms suits an analog servo and 4 ms or 3 ms a digital servo. The 3 ms option needs firmware V1.1.5 or later and the FHSS V2 protocol on the RC8X, and an R8FG receiver with V2.1 marking. A high degree of customisation The settings menu, font, desktop, system theme, language and voice prompts can all be customised for a personal user experience without code changes, making the radio flexible for different users, models and driving styles. Customisable voice prompts The RC8X supports voice prompts for low transmitter, receiver and model battery voltage, low RSSI and various operating modes, with customisable language, format and content; the 3.5 mm headphone jack lets prompts be heard clearly in noisy environments or used discreetly in quieter ones. A custom voice pack is needed for your own voices, styles, intonations or dialects. One display with two areas of use By default the display shows parameter settings in a logical layout, and when an external 5.8 GHz receiver module is connected the upper part can show parameter settings while the lower part acts as an FPV screen. 8 channels for many model types The RC8X suits many RC cars, boats and robot projects – for example crawlers, drag racing cars, tanks, tracked vehicles, bashers, short course trucks, drift cars, petrol-powered and mini RC cars, monster trucks, off-road cars, sailboats, trimarans, bait boats and remote-controlled life buoys – with 8 channels to control several functions in advanced models. Multiple languages The RC8X supports several menu languages, including Chinese, English, Japanese, Spanish, German, Russian, French, Korean and Polish, and voice prompts can also be customised to several languages. Firmware for several languages is available via the RadioLink firmware page: https://www.radiolink.com.cn/rc8x_firmware Several mix functions The RC8X has 8 groups of programmable mix control, making it flexible for advanced models where several functions need to work together. 4WS mixing: Designed for crawlers, logging trucks and other vehicles with four-wheel steering. Brake mixing: Makes it possible to adjust the front and rear wheels independently, for example on larger 1/5 cars with petrol drive. Tank mixing: Designed for vehicles with twin motors, such as tanks. Tilt mixing: Designed for boats where simple parameter setting and smooth control are important. Built-in real-time telemetry The RC8X supports telemetry for RSSI, receiver voltage and the model's battery voltage, with RSSI and receiver voltage shown once binding is complete. Model voltage is shown by connecting the cable to the ESC and battery: up to 14S, 58.8 V with the R8FGH and up to 8S, 33.6 V with the R7FG and R8FG. R8FG receiver with integrated gyro The included R8FG receivers have an integrated gyro and support for high-voltage servos; the gyro helps the vehicle hold its direction, gives smoother cornering and reduces drift at higher speeds, with sensitivity adjusted via CH8 and controlled by default by the DL1 switch. Ergonomic and flexible design The RC8X is designed for comfortable use during longer sessions, with adjustable trigger spring tension and trigger slider, and a wheel that mounts on the left or right side. Grip-friendly design for longer driving sessions Adjustable trigger spring and trigger slider Left-hander-friendly construction with a movable wheel A lanyard is included for more comfortable handling Memory expansion up to 64 GB 32 GB of memory expansion is included according to the documentation USB Type-C upgrade online The FPV display holder and thumb stick are mentioned as accessories in the documentation and are not included in the package. Several power supply options The RC8X can be powered with several different battery and power supply solutions. 8 AAA batteries 2S–4S LiPo battery 6S NiMH battery Power supply via computer or power bank with a Type-C cable When powered via Type-C from a computer or power bank, the input voltage must not exceed 5.5 V, and RadioLink's voltage protection software and JST connector help protect components against reverse polarity. A 7.4 V 1700 mAh lithium battery is matched to the battery compartment and is stated to give around 7 hours of standby time. Wide receiver compatibility The RC8X comes with two R8FG receivers and is also compatible with several other RadioLink receivers. R8FG, standard receiver R16F R16SM R12F R8EF R8FM R8SM R8XM R8FGH R7FG R6FG R6F R4FGM Suitable for many model types RC cars Crawlers Drag racing cars Drift cars Monster trucks Short course trucks Tracked vehicles and tanks RC boats and bait boats Remote-controlled life buoys Robot projects Technical specifications for the RC8X transmitter Model: RadioLink RC8X Product type: 8-channel transmitter Size: 121 x 163 x 209 mm Weight: 438.5 g Antenna: Built-in antenna Battery compartment: 92 x 52 x 14.5 mm Frequency band: 2.4 GHz ISM band, 2400–2483.5 MHz Spread spectrum mode: FHSS, 67-channel pseudorandom frequency hopping Channel resolution: 4096 with normal jitter of 0.25 µs Channels: 8 Applicable model types: Car, including crawlers, drag racing cars, tanks and tracked vehicles, boat and robot Display: 4.3 inch, 800 x 480, full colour, backlit IPS touchscreen Model memory: 200 model groups Range on the ground: Up to 600 m under open, interference-free conditions Operating voltage: 7–17 V DC, 8 AAA batteries, 2S–4S LiPo battery or 6S NiMH battery Operating current: 250 mA ±10 mA @ 8.4 V with the IPS display backlight on, 190 mA ±10 mA @ 8.4 V with the IPS display backlight off Type-C input voltage: 5 V Type-C input current: 500 mA Type-C output voltage: 4.6–5.0 V Type-C output current: Max 1 A DSC port input voltage: 0–5 V DSC port output voltage: 0–3.3 V Modulation mode: GFSK Transmitter power: <20 dBm Response time: 3 ms, 4 ms or 14 ms can be selected Low-voltage alarm: An alarm for low transmitter voltage, low receiver voltage, low model battery voltage or low RSSI can be customised Compatible receivers: R8FG, R16F, R16SM, R12F, R8EF, R8FM, R8SM, R8XM, R8FGH, R7FG, R6FG, R6F and R4FGM Voice prompts: Supported Custom menu: Settings menu, font, desktop and system theme can be customised Long-range modules: Compatible with TBS Crossfire and ELRS long-range module FPV head tracking function: Supported Compatible flight controller hardware: ArduPilot, Pixhawk, BetaFlight, Arduino and Raspberry Pi can be connected with an SBUS signal Operating temperature: -30 °C to 85 °C Language selection: Simplified Chinese, Traditional Chinese, English, Japanese, Spanish, German, Russian, French, Korean and Polish Technical specifications for the R8FG receiver Model: RadioLink R8FG Product type: 8-channel receiver with integrated gyro Size: 35 x 24 x 13.5 mm Antenna length: 205 mm Weight: 10.5 g Channels: 8 Signal output: SBUS + PWM Operating voltage: 3–12 V Operating current: 35 mA at 5 V Frequency band: 2.4 GHz ISM band, 2400–2483.5 MHz Spread spectrum mode: FHSS, 67-channel pseudorandom frequency hopping Channel resolution: 4096 with 0.25 µs per section Telemetry: Built-in real-time telemetry for the model's battery voltage, RSSI and receiver voltage Gyro: Integrated gyro with adjustable gyro sensitivity Splash protection: IPX4 Suitable model types: Car, including crawlers, tanks and tracked vehicles, boat and robot Control range: Up to 600 m Compatible transmitters: RC8X, RC6GS V3, RC4GS V3, RC6GS V2, RC4GS V2, RC6GS, RC4GS, T16D, T12D, T8FB and T8S Good to know The maximum range is tested in open areas without interference and can vary with the model, installation, antenna placement, surroundings and signal conditions. Response down to 3 ms requires a compatible receiver, the right firmware version and the FHSS V2 protocol, so always check the receiver, model type, channel settings, gyro sensitivity, telemetry and any FPV or DSC function before use; some functions need extra accessories such as an external 5.8 GHz receiver module, an FPV display holder, a thumb stick, TBS Crossfire or an ELRS module.

4.375,-

4.575,-

KJØP
-4%
Hovedbilde RPM 81562 Front Right Upper & Lower A-arms for 8S AR ... Hovedbilde RPM 81562 Front Right Upper & Lower A-arms for 8S AR ...
RPM 81562 Front Right Upper & Lower A-arms for 8S AR ...
Art.nr: 81562
Copied
Front Right Upper & Lower A-arms for the ARRMA Kraton 8S & Outcast 8S Quick Notes: – lighter than stock by 4.5 grams per upper / lower a-arm pair – replaces the front right upper A-arm from stock ARRMA #ARA330561 – replaces the front right lower A-arm from stock ARRMA #ARA330589 – one vehicle will require 1 – #81522 & 1 – #81562 for completion of the front end – rear a-arms also available – RPM #80812 Description The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren’t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more. Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam’s cross-section is a whopping 5/8” (15.8mm) tall x 3/8” (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck’s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there’s not much worse than a bent chassis. Our front upper A-arms use a dual beam construction where each beam is a massive 1/2″ (12.7mm) tall x 3/8” (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability. Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can’t go wrong with RPM! Version Notes: RPM A-arms work perfectly with 8S versions of the Kraton & Outcast using ARRMA #330569 Spring Perches. EXB models using ARRMA #330740 Spring Perches may experience interference issues at both the shock mount and sway bars. RPM does not recommend the use of our a-arms on these vehicles since modification of the a-arms may be necessary to eliminate bind at the shocks and sway bars. Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (#81522) & one right (#81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA #ARA330561 and the lower A-arms from stock #ARA330589. Installation Notes:: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 – 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.

329,-

369,-

KJØP
-11%
Hovedbilde LOUISERC 3220X Tires & Wheels MT-CYCLONE 3,8 Hovedbilde LOUISERC 3220X Tires & Wheels MT-CYCLONE 3,8
LOUISERC 3220X Tires & Wheels MT-CYCLONE 3,8" Sport ...
Art.nr: LT3220X
Copied
LOUISE LT3220X - MT-CYCLONE Tires for 1/8 Trucks - 0" & 1/2" Off-set This is the new Louise MT-CYCLONE Monster Truck tires for 1/8 scale trucks with exchangeable off-set 17mm hexes (Fits trucks like Traxxas E-REVO, E-MAXX & Summit etc). The MT-CYCLONE tires have a sporty rubber compound with good grip. The MT-CYCLONE tire tread is perfect for street and smooth surface bashing. The new black nylon wheel has a removeable hex hub that makes it fit most 1/8 scale trucks with a 17mm hex front and/or rear! Specs: Fits: 1/8 Trucks Tire Diameter: 170.9mm Tire Width: 107.8mm Wheel Diameter: 3.8" Wheel Hex: 17 mm Wheel Color: Black Wheel Off-set: 0" & 1/2" (removable hex hub) Tire Compound: Sport

649,-

699,-

KJØP
-7%
Hovedbilde Traxxas 8169 Beadlock Rings 1.9
Traxxas 8169 Beadlock Rings 1.9" Alu Satin (4)
Art.nr: TRX 8169
Copied
Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS (48)

319,-

349,-

KJØP
-9%
Hovedbilde Traxxas 1052474 4-TEC Drift 2WD Nissan 240SX XL-5 TQi ...
Traxxas 1052474 4-TEC Drift 2WD Nissan 240SX XL-5 TQi ...
Art.nr: TRX 105247-4-BLK
Copied
PRODUCT INFO: Precise Drifting - Classic Nissan Style A favorite at drift competitions, the S13 Nissan® 240SX combines light weight, rear-wheel drive, and almost perfect 50/50 weight distribution. Traxxas creates the ultimate RC drift car by adding an incredible replica Nissan 240SX body to the proven 4-Tec® Drift chassis. Outfitted with advanced TSM® Drift technology, 4-Tec Drift is easy to master and endless fun to drive with its smooth, predictable slides and high-tech chassis. Take your drifting experience to the next level with the Traxxas 4-Tec Drift. New High-Angle Steering 4-Tec Drift delivers big sideways drifts and quick transitions thanks to its steering geometry and powerful TSM Drift Mode. TSM compares steering angle with driver input and seamlessly applies just enough assistance to maintain the desired drift. 4-Tec Drift also includes an optional high-angle steering kit to boost steering angle to 75° for drivers seeking maximum throw. TQi Radio with Included Wireless Module The included Traxxas Link™ Wireless Module harnesses the full potential of 4-Tec Drift’s powerful TSM drift modes. Use the full-color graphical interface to personalize the TQi™ radio and unlock its advanced tuning features. Tap the handbrake button on the side to initiate rotation and begin your drift. Clipless Nissan 240SX Body 4-Tec Drift raises the bar for durability, ease of use, and scale detail with its clipless Nissan 240SX body. Beautiful high gloss paint contrasts the molded body details for show-stopping looks and classic 80’s Nissan styling. Hidden body mounts under the hood and rear spoiler preserve the 240SX’s sleek lines while holding the body tightly to the chassis. Customizable Drift Modes 4-Tec Drift lets you choose between three customizable drift modes. Innovative TSM® Drift technology replaces old-fashioned drift gyros with smooth precise control that can be fine tuned with the Traxxas Link app. New drivers can drift like a pro without specialized knowledge or skills, and advanced enthusiasts will enjoy the refined controls and smooth performance. Hard and Soft Compound Tires Included 4-Tec Drift delivers maximum versatility with two sets of 1.9" drift tires included in the box. Use the factory-installed hard compound tires on any hard abrasive surface like pavement or cement. The included soft compound tires provide refined drift control on polished surfaces. Rear-Wheel-Drive Platform 4-Tec Drift rides on a rear-wheel-drive platform based on the responsive 200 mm 4-Tec chassis. The redesigned front bulkhead and suspension provide optimal drift geometry and over 60° steering angle. Drivers can take advantage of individual settings for caster, roll center, ackerman, track width, and more. What’s In The Box: 4-Tec Drift with XL-5 ESC and Titan Drift motor TQi™ 2.4 GHz radio with Wireless Module Front and rear soft-compound tires Optional High-Angle Steering Kit High quality maintenance tools What You’ll Need: Batteries: 4-Tec Drift requires a single NiMH or 2-cell LiPo battery. Charger: Traxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performance. AA Alkaline Batteries: Four batteries for the transmitter. SPECS: Name: 4-Tec Drift Nissan 240SX Type: On-Road Cars Skill Level: 1 Scale: 1/10 Weight: 1.30 kg Length: 467 mm Width: 216 mm Height: 131 mm Wheelbase: 257 mm Center Ground Clearance: 12 mm Driveline: Rear-wheel drive Differential Type: Spool Gear Pitch: 48 pitch Steering Servo: 2075 digital high-torque waterproof Radio System: TQi™ 2.4 GHz 3-channel transmitter Battery Compartment Specs: 174 x 48 x 23/26 mm MOTOR SPECS: Name: Titan Drift 21T 550 Type: High-torque brushed motor Length: 78 mm overall length, 57 mm can length Diameter: 39 mm Shaft Size: 3.17 mm Connector Type: Bullet ESC SPECS: Name: Waterproof XL-5 ESC with low-voltage detection Type: Brushed Motor Connectors: Bullet Battery Connectors: Traxxas High Current Connector Power Wire: 14 gauge

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Traxxas 6561 TRX-4 Telemetry Expander Mount
Traxxas 6561 TRX-4 Telemetry Expander Mount
Art.nr: TRX 6561
Copied
The telemetry expander mount fits over the motor on TRX-4® and TRX-6® trucks to provide a secure mounting point for the 6550X Telemetry Expander Module.

69,-

79,-

KJØP
-13%
Hovedbilde Traxxas 8058X Chassis conversion kit TRX-4 (Long to ...
Traxxas 8058X Chassis conversion kit TRX-4 (Long to ...
Art.nr: TRX 8058X
Copied
Traxxas 8058X - Chassis conversion kit, TRX-4® (long to short wheelbase) (includes rear upper & lower suspension links, front & rear inner fenders (for clipless body mounting), short female half shaft, battery tray, 3x8mm FCS (4)) (fits #8050 series bodies) The clipless chassis conversion kit contains the necessary hardware to change your TRX-4® from a long to short wheelbase configuration. The kit includes clipless front and rear inner fenders, shorter suspension links, shortened half shaft, revised inner fenders, battery tray, and 3x8 mm screws (4).

349,-

379,-

KJØP
-8%
Viser 145 til 153 (av 5625 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png