Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lim & Teip / Lim-produkter / Zap-lim / Zap Blue Adhesives Thread Locker .20 oz

Zap Blue Adhesives Thread Locker .20 oz

Art.nr: PT42

59,-

Zap

Zap
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Pacer has designed this bottle of Threadlocker Compound to be
       used on metal fasteners. It is not recommended for plastic parts.

INCLUDES: One bottle of Pacer Threadlocker

SPECS:    Size: 0.20 ounces (6ml)

FEATURES: Medium strength general purpose thread locker
          Locks threaded fasteners against vibration
          Perfect for use in helicopters and all RC cars
          Clean and dry parts for best results (removing grease, oil and dirt)
          Parts can be returned to service immediately in MOST CASES
          Thread locking compound comes in a Red bottle with a clear nozzle tip

COMMENTS: This bottle of glue will appear big in context to the glue.  The
            reason being is the glue requires a large amount of oxygen or the
            glue will dry out.  All one would need to do once you have the glue
            is shake the bottle and turn upside down, if the tip turns Blue
            then the glue is present.  To some the bottle may appear empty.

Produsent

Zap

Zap

Kunder kjøpte også

Hovedbilde Traxxas 9664 Shock caps, GT-Maxx® shocks (2)/ spring ...
Traxxas 9664 Shock caps, GT-Maxx® shocks (2)/ spring ...
Shock caps for Sledge® GT-Maxx® shocks with spring perches (2) and adjustment collars (2

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1
Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1
 This is the 54T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1

39,-

KJØP
Hovedbilde Carson 530909 Aluminum Animal Guard for Tamiya King ...
Carson 530909 Aluminum Animal Guard for Tamiya King ...
Aluminum Animal Guard for Tamiya King Hauler and Globe Liner Animal Guard for Tamiya King Hauler or Globe Liner, made from Aluminum. Includes spaces and screws. Weight: 155gr.

1.095,-

1.495,-

KJØP
-27%
Hovedbilde Tamiya 56504 1/14 Roof Spoiler Tractor Truck Hovedbilde Tamiya 56504 1/14 Roof Spoiler Tractor Truck
Tamiya 56504 1/14 Roof Spoiler Tractor Truck
This roof spoiler is a great little unit used to hop-up the Tamiya King Hauler. INCLUDES:    (12) 2x6mm screws    (2) link pins    (2) 2mm nuts    (2) 2mm e-clips    (2) spoiler stays    (2) spoiler rails    (2) spoiler brackets (parts A2 and A4)    (2) rod holders    (1) spoiler rod    (1) black nylon spolier REQUIRES:    A Tamiya King Hauler                         ****** (Refer to next page)      MDJ 41/95 ¦-) The roof spoiler may also be used with Tamiya's Globe Line Cab over truck. The spoiler is designed to be used with Tamiya's 1/14 scale tractor trailer trucks. FEATURES:   Adjustable wind-deflector type roof spoiler   Realistic roof spoiler (enhances truck appearance and also functional)   Black plastic styrene parts SPECS: Spoiler angle can easily be adjusted between 30-90° thus allowing    you to choose desired angle

279,-

KJØP
Hovedbilde Traxxas 3949X Pinion Gear 19T-32P Hardened Steel
Traxxas 3949X Pinion Gear 19T-32P Hardened Steel
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 4628R Differential Output Yokes Black (2)
Traxxas 4628R Differential Output Yokes Black (2)
These are the Differential Output Yokes                 for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes           Two 3x5mm countersunk screws           Two screw pins REQUIRES: Installation SPECS:    Length: .70" (18mm)           Diameter: .51" (13mm)

59,-

Ikke på lager
Hovedbilde Tamiya 87125 15 WELL PALETTE *5 Hovedbilde Tamiya 87125 15 WELL PALETTE *5
Tamiya 87125 15 WELL PALETTE *5
Palettes are handy for mixing paints. Metal palettes are useful, but they require cleaning with thinner after each use. This PET plastic palette can be disposed of after each use, thus allowing the modeller to save both time and money. About the Item Each palette plate has 15 wells, including 9 round (Dia.: 25mm The palette plate is 3mm thick and each section can be easily cut away with scissors. The palette can be cleaned with any Tamiya paint thinner except Item 87089 Tamiya Airbrush Cleaner (250ml). Related Items Tamiya Modeling Brush Basic Set (87066) Tamiya Modeling Brush HF Standard Set (87067) Paint Stirrer (2pcs.) (74017)

69,-

KJØP
Hovedbilde Zap PT-50 ZIP CA Kicker Aerosol 142g
Zap PT-50 ZIP CA Kicker Aerosol 142g
ZIP KICKER AEROSOL - Super-Glue/CA Glue Activator Pacer Technology Hobby Zip Kicker Aerosol is a solvent-based accelerator to be used with Super Glues in general and all of the ZAP line quick set adhesives. The Zip Kicker formula will force the immediate cure of all cyanoacrylates, but will not craze most plastic surfaces. Zip Kicker expands the gap filling ability of the adhesives, permits structural fillet forming and solves most tough-to-bond combinations of surface materials. Specs: Aerosol Can Content: 5oz / 142 g Forces immediate cure of cyanoacrylate glues Best accelerator for ZAP and all other CA glues Expands the gap filling capacity of the glue Solves most tough to bond material combinations USE INSTRUCTIONS: (NOTE – Not for use in cosmetic applications. Not recommended for granite or other natural stone materials). Use in a well-ventilated area with fresh air source. Product can be applied to surfaces prior to application of adhesive to set adhesive surface. ZipKicker can also be applied to outside edge of bond to secure parts immediately. Using Zip Kicker can influence the overall strength of adhesive bonds. STORAGE AND SHELF LIFE: Store in cool area away from sunlight or heat. Stored under these conditions, a one-year shelf life can be expected. Can replace Great Planes MR6034 / GPMR6034 / 18MR6034

139,-

149,-

Ikke på lager
-7%
Hovedbilde Tamiya 74522 PAINTING STAND SET
Tamiya 74522 PAINTING STAND SET
This a multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting 1/24 scale model cars. The width of clips can also be adjusted to obtain the most stable hold. Both body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free.

269,-

KJØP
Hovedbilde Zap PT-16 Adhesives Z-7 De-Bonder 1 oz
Zap PT-16 Adhesives Z-7 De-Bonder 1 oz
This is a 1oz Bottle of Z-7 CA Glue Debonder from Pacer. FEATURES Debonding agent for all CA glues. Removes cured CA glue. Will not craze most plastics. Odorless. Works by softening the glue so it can be wiped away. Removes glue from fingers and most surfaces. INCLUDES One 1oz Bottle of Z-7 CA Glue Debonder. SPECIFICATIONS 1oz (29.5ml)

79,-

KJØP
Hovedbilde Tamiya 74528 Alligator Clips (4) For Bottled Paint ...
Tamiya 74528 Alligator Clips (4) For Bottled Paint ...
2This is the Alligator Clips (4) from Tamiya.     FEATURES Handy clips for holding newly cemented or painted parts  Can be used with the Tamiya painting stand,  work stand or paint jar stand.   INCLUDES Four alligator clips  

79,-

KJØP
Hovedbilde TAMIYA 74111 HANDY CRAFT SAW II
TAMIYA 74111 HANDY CRAFT SAW II
This handy tool is perfect for modifying plastic models or Mini 4WD machines, as well as woodcraft. Its blades are slightly thicker than Item 74018 Mini Razor Saw and therefore less prone to distortion or warping. The item includes 2 blades of different width, and features fine teeth which enable it to cut through a variety of materials while leaving a smooth finish. The 2 blades can be inserted into the included plastic grip, which features the Tamiya logo. Includes wide carbon steel blade x1 and slim carbon steel blade x1 Both blades are of .35mm thickness. Wide blade length: 46mm Slim blade length: 43mm

139,-

KJØP
Hovedbilde Tamiya 58441 Buggy Champ 2009 Hovedbilde Tamiya 58441 Buggy Champ 2009
Tamiya 58441 Buggy Champ 2009
The prominent figure of the R/C car boom was the Buggy Champ which was first released in 1979. Tamiya is now proud to re-release the Buggy Champ to celebrate the car's 30thyear anniversary. The chassis has been finely tuned while maintaining the original features of the chassis such as the unique front double trailing arms and rear torsion suspension.R/C fans' hearts will definitely race when they see the nostalgic form and relive the dynamic performance of this machine. Description The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. It keeps true to the basic layout of the original while incorporating modern improvements and features many refined parts that are reproduced with newly built metal moldings. The Buggy Champ also features a transparent mechanism box which protects the mechanics and battery and comes with grooved front and rear tires with block tread pattern. A realistic body is molded in white polystyrene and can be painted with plastic model paints. The Buggy Champ surely brings back the memories of the good old days when everyone was excited with its aggressive driving performance. About the Chassis: The chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and main battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss and mounted on the 3-piece center-lock wheels are grooved front tires and rear tires with block tread pattern that ensure superb off-road performance. • Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm • Tread: F170mm,　R175mm • Tire Width/Diameter: F19/74mm,　R35/83mm • Chassis: 2mm Thick FRP Plate with Reinforcing Aluminum Plate • Rear Wheel Drive • Weight: Approx. 1730g • Type 540 Motor included  • No Differential Gears • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle • 4 Oil Dampers • Gear Ratio=6.5:1 or 9.3:1 • Requires: 2-Channel radio, servo, esc, Battery pack & charger, and Tamiya TS paint. (Sold separately) Compatible Battery Spec Size: 96mm X 47mm X 25MM (Shorty Pack) Shorty Packs available by various battery manufacturers in the hobby industry offer “Shorty Pack” batteries that will fit in the chassis compartment. NOTE: The foam block included with the kit will need to be modified or changed to accommodate the “shorty pack”. Additionally, you will need to change the plugs on the included ESC to be compatible with “shorty pack” bullet connectors.  

3.995,-

4.795,-

KJØP
-17%
Hovedbilde Tamiya 74017 Paint Stirrer (2)
Tamiya 74017 Paint Stirrer (2)
     This is a Package of Two Paint Stirrers from Tamiya. FEATURES: Stainless steel tool is designed for stirring bottled paints and for             blending different color shades.           One end is shaped like a small spoon, while the other is flat like             a spatula.           Carded packaging. INCLUDES: Two Metal Paint Stirrers. SPECS:    Length: 5.9" (15cm)

59,-

KJØP
Hovedbilde HPI RACING 160162 Plazma 11.1V 3200mAh 40C LiPo ...
HPI RACING 160162 Plazma 11.1V 3200mAh 40C LiPo ...
Plazma 11.1V 3200mAh 40C LiPo Battery Pack 35.52Wh Rectangular Case 3S LiPo with T-Plug Connector & JST-XH Balance Lead Feel the Power of Plazma with the all new battery range from HPI Racing. The Plazma LiPo range is the ideal match for all HPI kits that require a durable and reliable Lithium-Polymer battery cell. This LiPo pack is suitable for any electric-powered car that requires a rectangular case 3S LiPo. Perfect for kits like the RS4 Sport 3, Savage XS, Jumpshot, & the Maverick Quantum. Specification: Voltage: 11.1V Capacity: 3200mAh C Rating (Continuous): 40C C Rating (Burst): 80C Case Type: Rectangular LiPo case, sealed plastic Dimensions: 139 x 47 x 25.4mm Connector: T-Plug Balance Lead: JST-XH Note: LiPo batteries must be charged with a LiPo-compatible charger.

399,-

549,-

Ikke på lager
-27%
Hovedbilde Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ... Hovedbilde Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ...
Pro-Line 350900 2017 Ford F-150 Raptor Clear Body for ...
This is a 2017 Ford® F-150 Raptor Clear Body for TRX-4®. Pro-Line is ready to unleash the officially licensed 2018 Ford® F-150 Raptor body for your Traxxas® TRX-4®! This body will completely transform your Truck into an Ultra Scale modern Raptor Rig perfect for Rock Crawling. The details from the full-size 2017 Raptor have been faithfully recreated and is designed to drop right onto the stock 12.8" wheelbase TRX-4! This Pro-Line body is much lighter than the stock TRX-4® body for lower center of gravity and improved crawling performance. Window masks, Paint-then-peel overspray film and fully licensed detailed stickers are included to finish off the look. Raise the bar and get your own Pro-Line 2017 Ford® F150 Raptor Body for your TRX-4® now!   Features Officially Licensed 2017 Ford® Raptor Body with camper shell Direct Fit Onto the 12.8" Wheelbase TRX-4® Transform your TRX-4® into an Aggressive 2017 Ford® Raptor Lighter Than Stock for Improved Performance Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Four steps to Bash Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck   Including 2017 Ford® F-150 Raptor Clear Body for TRX-4® (1 pc) Decal Sheet Window Masks Paint Then Peel Overspray Film   Fits 12.8" Wheelbase TRX-4® (Land Rover Defender & Tactical Unit) *Stock Inner Fender Wells are do not fit this body

659,-

699,-

KJØP
-6%
Hovedbilde Zap Adhesives Zap-O Odorless CA+ Foam Safe Glue .7 oz
Zap Adhesives Zap-O Odorless CA+ Foam Safe Glue .7 oz
This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer. FEATURES: An odorless CA that really works!           Great on styrofoam and foam, without a primer.           Medium thick, slow cure.           Works on balsa, plywood and most other hobby materials.           No-more-tears formula.           Won't fog most clear plastics. INCLUDES: One 20 Gram Bottle of Zap-O Odorless CA+ Glue. SPECS:    20 Grams

179,-

189,-

KJØP
-5%
Hovedbilde Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ... Hovedbilde Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ...
Pro-Line 355200 70's Rock Van Clear Body for 313mm WB ...
Pro-Line ’70s Rock Van Clear Body for 313mm Wheelbase Scale Crawlers   This is the '70s Rock Van Clear Body for Scale Crawlers. It's time to get your retro creative juices flowing with the new Pro-Line '70s Rock Van body! Based on the iconic Vans of the mid-late 1970s, the Rock Van provides a blank canvas to recreate the most awesome vans of yesteryear. From cable news vans, to ice cream trucks, to overlanding rigs, to transporting around your favorite team of ex-US Special Forces: the possibilities are endless! The '70s Rock Van features super-detailed front grille sections, oversized fender flares, and two sets of add-on Bubble Windows, porthole and teardrop, to give your van the ultimate retro look. The decal sheet also includes a full set of yellow & orange pinstriping. Just paint it in your favorite solid color and you are ready to go. This body fits all popular 12.3" wheelbase crawlers outfitted with 2 sets of tall body posts. Features: Blank Canvas to Inspire Creative Builds Based on Iconic 1970s Vans Add-on Bubble Windows for Extra Retro Style Made in the USA, since 1982 Included: '70s Rock Van Clear Body (1 pc) Detailed Decal Sheet Window Masks Paint-then-peel Overspray Film Included Fits: Traxxas TRX-4 Sport Traxxas TRX-4 Sport Kits Traxxas TRX-4 Sport with TRAXX Traxxas TRX-4 Ford Bronco Traxxas TRX-4 Chevy Blazer Traxxas TRX-4 Mercedes-Benz G500 SCX10™ Ascender® Element Enduro Other 12.3" Wheelbase Crawlers Note, all of the above crawler chassis may need additional custom fitted long body posts front and rear Specs: Length: 514mm Width: 208mm Height: 165mm Wheelbase: 312mm

595,-

695,-

KJØP
-14%
Hovedbilde Pro-Line 343400 Ram 1500 Clear body for 12.3 Hovedbilde Pro-Line 343400 Ram 1500 Clear body for 12.3
Pro-Line 343400 Ram 1500 Clear body for 12.3" (313mm) ...
Pro-Line is Proud to announce that the Ram 1500 Body Won The FIX 12-Hour Endurance race, and is now RECON G6 Certified This is a Ram 1500 clear body for 1:10 Scale Crawlers. Pro-Line has something new for all of the scale rock crawling fans: a Ram 1500 body! This customized Ram body is perfect for giving your rock crawler a unique look amongst the crowd of Jeeps and Fords. The Ram 1500 body has an area in the bed made specifically for a spare tire and also features customized fender flares similar to ones found on full scale trucks. This licensed body has bold Ram 1500 styling that is a must have for your 1:10 rock crawler. Order your own and start customizing it today!   Length:   19.0" (483mm) Width:   8.0" (203mm) Height:   5.8" (146mm) Wheelbase:   12.3" (313mm)           Features Custom Ram 1500 Rock Crawling body Unique bed for spare tire detail Big Fender Flares mimic real crawlers Detailed Stickers for awesome scale appearance Perfect for Ram 1500 truck fans! Made with crystal clear polycarbonate Four step to Crawler Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your Rock Crawler Made in the USA, since 1982   Includes Ram 1500 Clear Body for 1:10 Scale Rock Crawlers (1 pc) Window Masks Decal Sheet   Fits SCX10™ Ascender® Element Enduro Other 12.3" Wheelbase Crawlers

549,-

599,-

KJØP
-8%
Hovedbilde Pro-Line 1/10 1993 Ford Ranger Clear Body 12.3 Hovedbilde Pro-Line 1/10 1993 Ford Ranger Clear Body 12.3
Pro-Line 1/10 1993 Ford Ranger Clear Body 12.3" ...
1/10 1993 Ford Ranger Clear Body 12.3" (313mm) Wheelbase Crawlers Key Features Highly Detailed Replica of the 1993 Ford® Ranger! The Most Scale Body Pro-Line Has Ever Produced Highly Detailed Molded Front Grill, Side-view Mirrors, Taillight Buckets, and Door Handles Separate Cab and Bed for Ultra-realism Made in the USA, since 1982 In The Box 1993 Ford® Ranger Clear Body - Cab (1 pc) 1993 Ford® Ranger Clear Body - Bed (1 pc) Molded Black Plastic Scale Parts Tree (1 pc) Molded Clear Plastic Lens Parts Tree (1 pc) Molded Plastic Mounting Hardware - M2.5 x 6mm Socket Head Cap Screws (11 pcs) Cab to Bed Mounting Hardware - M3 x 6mm Button Head Cap Screws (4 pcs) & M3 Nuts (4 pcs) High-Quality Decals Window Masks Paint-then-peel Overspray Film Instruction Sheet This 1993 Ranger body was developed from the ground up and designed in the latest 3D computer-aided design environment to be as accurate as possible in 1:10 Scale size. Included with this body are a molded black plastic front grill and rear taillight buckets with clear headlight and taillight lenses that allow for the addition of working 5mm LED lights (PRO631700) and 3mm LED turn signals (sold separately). Also included are molded plastic side-view mirrors and door handles that are scale replicas of the full-size parts off the 1993 Ford® Ranger. The Cab and Bed are separate pieces for added scale realism and are made from crystal-clear polycarbonate that can be painted to match your favorite factory Ranger color or custom painted to whatever your heart desires. Detailed decals are also provided including stickers that match the body graphics found with the STX version of this iconic pick-up truck. Pro-Line also offers a Pre-Runner Fender Flare Kit (PRO636900) for this body that transforms your crawler into a desert running Pre-Runner! Fits: SCX10™ II & III Ascender™ Element Enduro Other 12.3" Wheelbase Crawlers Included: 1993 Ford® Ranger Clear Body - Cab (1 pc) 1993 Ford® Ranger Clear Body - Bed (1 pc) Molded Black Plastic Scale Parts Tree (1 pc) Molded Clear Plastic Lens Parts Tree (1 pc) Molded Plastic Mounting Hardware - M2.5 x 6mm Socket Head Cap Screws (11 pcs) Cab to Bed Mounting Hardware - M3 x 6mm Button Head Cap Screws (4 pcs) & M3 Nuts (4 pcs) High-Quality Decals Window Masks Paint-then-peel Overspray Film Instruction Sheet Specifications: Manufacturer # 3537-00 Body Style Pickup truck Material Polycarbonate Product Height 5.9" (150 mm) Product Length 20.5" (521 mm) Color Clear Scale 1/10 Vehicle Type Rock Crawler Wheelbase 12.3" (312 mm)

899,-

969,-

KJØP
-7%
Hovedbilde Hobbywing Motor EzRun 4274 2200kV Sensorless Hovedbilde Hobbywing Motor EzRun 4274 2200kV Sensorless
Hobbywing Motor EzRun 4274 2200kV Sensorless
Hobbywing Motor EzRun 4274 2200kV Sensorless High Torque The 4 pole design will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain. High Efficiency Hobbywing’s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90% meaning that if the energy consumption of the motor is at 1000 watts your guaranteed that 900 watt of that power will be available and no less. Great Construction The motor housing is made from hard anodized aluminum, motor windings are wound from pure oxygen-free double insulated copper wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets, output shaft from high quality polished alloy steel and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn will guarantee strength, outstanding performance, high durability and smoothness of the motor. Compatible (with the EZRUN MAX8 ESC) When pairing the EZRun 4274 motor with the Hobbwing EZRun MAX8 (150amp) ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band. Wide Application This motor can also provide a powerful upgrade solution for all popular 1/8th scale monster trucks such as TRAXXAS E-REVO, E-MAXX, HPI SAVAGE, and THUNDER TIGER E-MAT plus other trucks and buggies. Specifiations Scale: 1/8th Brushed/Brushless: BL Sensored/Sensorless: SL Pole Count: 4 KV Rating: 2200 LiPo Cells: 2-6S No-load Current(A): 5 Max. Power Output(W): 3000 Current at the Point of Max. Power Output(A): 120A Size & Weight O.D.(mm): 42.0(1.654in) Length (mm): 74.0(2.913in) Shaft Diameter (mm): 5.0(0.196in) Weight (g): 418(14.745oz) Other Parameters Timing: 0 Applications: 1/8th Monster Trucks/Trucks 1. How to Mount the Motor into a RC vehicle M3/M4 mounting screws (4*M3 & 4*M4) are needed here, as the mounting holes are 8mm in depth, so we don't recommend using the M3/M4 screws with the length exceeds 10mm to mount the motor into your vehicle. (Note: please choose the right mounting screws as per your chassis.) Please choose the right mounting screws as per your chassis. 2. How to Connect the Motor to an ESC There is no polarity on the A/B/C three ESC-to-motor wires, so do not worry about how you connect them initially. You may find it necessary to swap two wires if the motor runs in reverse. 3. Recheck the Installation & Connections Recheck the installation and all the connections before turning on the power. Specifications: Application: Car Motor Type: Brushless kV Value: 2200 kV Motor diameter: 42 mm Motor length: 74 mm Shaft Diameter: 5 mm Weight: 418 gram Max Current Cont.: 120 A Max voltage: 22,2 V Power Cont: 3000 W

1.295,-

1.395,-

KJØP
-7%
Hovedbilde Traxxas 3159 Hex Screws 3x10mm (6)
Traxxas 3159 Hex Screws 3x10mm (6)
These are stock replacement screws for the Traxxas kit. FEATURES: Steel construction           Cap head with hexagon socket drive insert           Metal lock washers INCLUDES: (6) Screws           (6) Lock Washers           (1) Hex Wrench SPECS:    Screws: Diameter: 3mm                   Length: 10mm           Lock Washers: Inner Diameter: 3mm                         Outer Diameter:4mm

35,-

KJØP
Hovedbilde Excel 60030 - Self-Healing Cutting Mat 216x305mm ...
Excel 60030 - Self-Healing Cutting Mat 216x305mm ...
Self-Healing Cutting Mat 216x305mm (Transparent) DETAILS Excel Blades - 8.5" X 12" CUTTING MAT The Excel Blades Self-Healing Mat is a must-have accessory for hobbyists and designers who frequently use cutting tools. 8.5" x 12" in size Available in Black, Blue, Clear, Purple and Green Features a one-inch grid pattern for accurate cutting and trimming These cutting mats feature a surface material that absorbs cuts from a sharp Excel Blades knife. The cutting mat reserves the surfaces around your work space and protects it from sharp tools creating damage to the area.  Phthalate free Made from PVC

149,-

KJØP
Hovedbilde Kyosho IF469B Air Cleaner (MP9 TKI4)
Kyosho IF469B Air Cleaner (MP9 TKI4)
Air cleaner set for MP9 TKI4. Includes new "pinned" air filter stay for use with IF443B center diff plate.

249,-

KJØP
Hovedbilde Tamiya 51023 M-NARROW RACING RADIAL TIRES
Tamiya 51023 M-NARROW RACING RADIAL TIRES
★More information will be provided when available. ★Replace parts in a timely fashion to ensure that your car runs at peak performance. Compatible Chassis TA07 PRO, TA06, TA06 PRO, TA06 MS, TA05 Ver.II, TB-04, TB-04 PRO, FF-04 EVO, FF-03, FF-03 PRO, TB Evo.7, TB Evo.6 & TB Evo.6 MS Chassis Compatible wheels: Item 50892, Item 50894, Item 51022, Item 51046, Item 51072, Item 51299, Item 53453, Item 53468, Item 53471, Item 53473, Item 53475, Item 53859 and Item 53860. Compatible tire inserts: Item 53434, Item 53435 and Item 53582.

99,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png