Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lim & Teip / Lim-produkter / Zap-lim / Zap PT-16 Adhesives Z-7 De-Bonder 1 oz

Zap PT-16 Adhesives Z-7 De-Bonder 1 oz

Art.nr: 5525740

79,-

Zap

Zap
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a 1oz Bottle of Z-7 CA Glue Debonder from Pacer.

FEATURES

Debonding agent for all CA glues.

Removes cured CA glue.

Will not craze most plastics.

Odorless.

Works by softening the glue so it can be wiped away.

Removes glue from fingers and most surfaces.

INCLUDES

One 1oz Bottle of Z-7 CA Glue Debonder.

SPECIFICATIONS

1oz (29.5ml)

Produsent

Zap

Zap

Kunder kjøpte også

Hovedbilde Hobbywing 80060442 SkyWalker 50A V2 UBEC
Hobbywing 80060442 SkyWalker 50A V2 UBEC
Hobbywing 80060442 SkyWalker 50A V2 UBEC Hobbywing Skywalker 50A ESC med 5A UBEC. For modeller med 3-4S lipo. Leveres uten batterikontakt men med 3.5mm gullkontakter til motor. Kan programmeres med radio eller LED programboksen. -Vekt: 36g -Størrelse: 65x25x8mm Product details in english Type Brushless Cont./Peak Current 50A/65A Input 2-4S LiPo BEC Switch Mode 5V 5A Input Wires 14AWG 100mm Output Wires 14AWG 100mm Input Connectors No Output Connectors 3.5mm Size 65x25x8mm Weight 36g

399,-

KJØP
Hovedbilde SkyRC 500007 Battery checker & Equalizer LiPoPal Hovedbilde SkyRC 500007 Battery checker & Equalizer LiPoPal
SkyRC 500007 Battery checker & Equalizer LiPoPal
  Genial liten sak man kan bruke til å kontrollere cellespenning på lipobatterier. Den kan også balansere lipo, samt vise total spenning og antatt restverdi på batteriet.     Product details in english SKYRC LiPoPal is a simply used battery checker and self voltage balancer. When we are flying or running outside, it is difficult to know the remaining capacity of the battery. With this tiny LiPoPal we could check the voltage of each cell and the remaining capacity in percentage at anytime and anywhere. As we know, if each cell of the battery pack is balanced, the battery performance will be much better and the cycle life will be longer. But sometimes, we may don?t have time or tool to balance the battery cell. With this small kit, when it detects the pack is not balanced, it will start work to balance the pack cell at once. Functions: There are two functions of this compact device: 1.Battery CheckerThe LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage. 2.Self Voltage BalancerThis program can equalize the individual voltages to their lowest one. Balance operation automatically starts about 5 seconds after the battery pack is connected. When the voltage difference between cells over 0.02V, the balancer will start to work. The corresponding voltage will be blinking when it is balancing. When the voltage difference between cells reaches 0.01V or less, balance operation ends and the device enters the sleep mode and SLP will be displayed on the LCD. How to use? Simply connect the battery pack to 7 pins connector (XH type). Please note the negative lead or pin of the LiPo connector should match the Negative marked on the shell of LiPoPal. After the LiPo is connected, the LCD display the voltage of each cell and the built in balance will check the voltage. If the pack is not balanced, the balancer will start working.   Applicable Battery Pack: 2-6S LiPo Voltage Display Tolerance: +/-1.5pst Voltage Display Resolution: 0.01v Voltage Display Range: 0-5v Balancing Current: 50mA Operating Temperature: 10+45deg Storage Temperature: -20+60deg Case Size: 70x38x11mm Weight: 23g

299,-

329,-

KJØP
-9%
Hovedbilde DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ... Hovedbilde DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ...
DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ...
LiPo, LiFe & LiIon Cell-tester with Low-Voltage Alarm 1-8S This is a small and practical Lithium battery cell-tester with built in low-voltage alarm. With this unit you can easily check your battery packs through the balance connector or have it installed in the model hooked up to the battery balance connector and get an buzzer tone when the set value is reached. Specifications: For 1S with JST-RCY (BEC) connector and 2-8S LiPo, LiFe & LiIon batteries with a JST-XH balance connector LCD: 0.5-4.5V/cell Cells: 1-8S Adjustable alarm value: OFF/2.7-3.8V per cell (pre-set at 3.3V) Volt precision: 0.01V Size: 40,5 x 29 x 13mm Weight: 14g

109,-

KJØP
Hovedbilde APC - 13x4 Thin Electric Propeller
APC - 13x4 Thin Electric Propeller
This is a 13x4E Electric ONLY Composite Propeller from Advanced Precision Composites. FEATURES Gray composite one-piece construction Five adapter rings that adapt to different motor shafts INCLUDES One composite propeller Five composite adapter rings for motor shaft diameters of 0.128" (3.2mm), 0.158" (4mm), 0.197" (5mm), 0.237" (6mm), 0.313" (7.9mm) REQUIREMENTS ALL props require balancing, this is very important, use a Top flite power point propeller balancer May need prop reamer, use great planes precision prop reamer standard or great planes precision prop reamer metric SPECIFICATIONS Diameter: 13" Pitch: 4 Hub inner diameter: 0.25" (6.3mm) COMMENTS For use with Electric motors only. Do not use with nitro or gasoline powered engines.

99,-

KJØP
Hovedbilde ZIP KICKER REFILL 8OZ – 237 ml PT29
ZIP KICKER REFILL 8OZ – 237 ml PT29
Stor refill flaske Kicker. 237ml Kan brukes på de fleste matrialer. Men ikke på isopor – foam.   FORCES IMMEDIATE CURE OF CYANOACRYLATE GLUE (CA)/SUPERGLUES BEST ACCELERATOR FOR ZAP AND ALL OTHER SUPER GLUES EXPANDS GAP FILLING CAPACITY SOLVES MOST TOUGH TO BOND MATERIAL COMBINATIONS AVAILABLE 2 DIFFERENT WAYS   Uses: ZIP KICKER Is the best way to accelerate the cure time of all brands of super glues. When sprayed directly on a glued joint it forces the immediate cure of the CA glue. Thick or slow style glues form an instant hard outer shell when sprayed with ZIP KICKER, the catalytic action begins curing the remaining liquid CA at an accelerated rate from the outside in, creating a strong bond.This action allows the creation of small to very large fillets and the ability to fill large gaps or cracks.Wood turners love this ability and often are able to progressively fill in large cracks and save the piece they are working on. ZIP KICKER will not harm most materials making perfect to use not only on wood but various plastics, metals, paints, and fabrics. Helpful Hints: A little goes a long way!Because ZIP KICKER cures CA glue by a chemical reaction, you can precisely control how fast the glue sets up.Use a small amount to start the reaction at one spot and it will continue until the glue is set.The more ZIP KICKER you apply to the glue, the faster it will cure. Once the entire surface of the glue has been sprayed with kicker and the reaction has started, adding more kicker will not speed up the cure rate.In hard to reach areas or when trying to join parts that are not porous you can pre-treat one of the parts to be joined with ZIP KICKER, apply ZAP GLUE to the other and join the two together.When working with balsa wood spraying ZIP KICKER on the back side of thin sheeting can set the CA underneath.Even a part treated with ZIP KICKER and allowed to dry will speed the cure time of any CA that comes in contact with it.DO NOT SPRAY ZIP KICKER AROUND YOUR BOTTLES OF CA,A SMALL AMOUNT OF KICKER ON THE OPENING OF YOUR CA BOTTLE CAN AND WILL SET OFF AND HARDEN THE ENTIRE BOTTLE.Although ZIP KICKER will work on most materials and paints, always test on samples for compatibility.For critical applications test sample joints for the designed strength requirements.

229,-

KJØP
Hovedbilde Dynomax 9881 Connector Adapter XT90 (male) - EC5 ... Hovedbilde Dynomax 9881 Connector Adapter XT90 (male) - EC5 ...
Dynomax 9881 Connector Adapter XT90 (male) - EC5 ...
DynoMAX B9881 - Connector Adapter XT90 (male) - EC5 (female) This is an practical connector adapter for batteries with an XT90 connector where you want to change it to a EC5 connector without soldering etc.   It also works if you have an charge lead with an EC5 connector but you have an vehicle with a XT90 connector system.

49,-

KJØP
Hovedbilde DynoMAX B9871 - Connector Adapter EC5 (male) - XT90 ...
DynoMAX B9871 - Connector Adapter EC5 (male) - XT90 ...
DynoMAX B9871 - Connector Adapter EC5 (male) - XT90 (female) This is an practical connector adapter for batteries with an EC5 connector where you want to change it to an XT90 connector without soldering etc.   It also works if you have an charge lead with an XT90 connector but you have an vehicle with a EC5 connector system.

49,-

KJØP
Hovedbilde Zap PT-44 ZAP-RT Rubber Toughened CA Clear Thick 1 oz
Zap PT-44 ZAP-RT Rubber Toughened CA Clear Thick 1 oz
ZAP-RT (Rubber Toughened) is our newest glue product, offered with our revolutionary, patented, No-Drip Tip. Formulated for numerous hobby and craft applications in R/C Airplanes, Cars and Boats, wood, plastic, composites, rubber, etc. ZAP-RT is extremely strong and flexible. The clear formula will not mar chrome R/C tire rims. Works best on: Aluminum Carbon Fiber Cloth Fiberglass Metal Most Plastics Pottery Rubber Wood  

139,-

KJØP
Hovedbilde Zap pt56 Adhesives Formula 560 Canopy Glue 2 oz
Zap pt56 Adhesives Formula 560 Canopy Glue 2 oz
Formula 560 is specially formulated to bond Canopies and Plastic parts to wood, fiberglass, paint, or MonoKote surfaces. FEATURES Safely bonds vinyl, ABS, Butyrate, and other plastics. Forms a firm, flexible clear bond that can withstand shock and vibration. INCLUDES One 2 ounce Bottle of White Glue COMMENTS Requires 3 hours drying time before parts can be handled, 24 hours for full cure.

89,-

KJØP
Hovedbilde DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm bananplugg Ladekabel med XT90 plugg til 4mm bananplugger. Benyttes for lading av batterier med XT90-plugg, og kobles rett i ladere med 4mm bananplugger.

99,-

119,-

KJØP
-17%
Hovedbilde Traxxas 8069X Bumper Front Chrome w/ Mount TRX-4 F-150
Traxxas 8069X Bumper Front Chrome w/ Mount TRX-4 F-150
Traxxas 8069X - Bumper Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2) Replacement front chrome bumper for 9830-series TRX-4® F-150® High Trail™ edition bodies. Includes bumper mount and 3x10 mm screws (2). Replacement part for these models: TRX-4® Ford® F-150® High Trail Edition™

149,-

169,-

KJØP
-12%
Hovedbilde Power HD B2S HV Digital BL Servo 50kg/0.10s
Power HD B2S HV Digital BL Servo 50kg/0.10s
Standardstørrelse-servo fra PowerHD med børsteløs motor masse kraft og titan og alu drev. Passer veldig bra som styreservo i flere rc-biler som krever en kvalitets standard-size servo. Spesifikasjoner Torque 6V 38kg Torque 7.4V 45kg Torque 8.4V 50kg Hastighet 6V 0.15sek Hastighet 7.4V 0.12sek Hastighet 8.4V 0.10sek Vekt 67g Motor Børsteløs Girtype Alu og titan Dimensjoner 41 x 20.5 x 38.3mm

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Traxxas 8864R Winch Line Red
Traxxas 8864R Winch Line Red
Traxxas 8864 Winch Line Red Winch Line - Red

55,-

KJØP
Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Orange For 1/10 Crawler 'G6 Certified' Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to set up your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig that will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge that will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Include: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Note: The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination. Manual:

319,-

349,-

KJØP
-9%
Hovedbilde Yeah Racing RC Rock Crawler Scale Spring Loaded Metal ... Hovedbilde Yeah Racing RC Rock Crawler Scale Spring Loaded Metal ...
Yeah Racing RC Rock Crawler Scale Spring Loaded Metal ...
Yeah Racing 1/10 RC Rock Crawler Scale Spring Loaded Metal Hook Black Easy to build spring loaded scale hooks for your crawler! Features an opening of 3mm to hook onto roofracks etc. Steel construction with metal paint to mimic the look of the hooks used in real vehicles.   Features: For: 1/10 Scale Crawlers Material: Steel Color: Black   Includes: Spring Loaded Metal Hook (1 pc)

49,-

99,-

KJØP
-51%
Hovedbilde Tamiya 74522 PAINTING STAND SET
Tamiya 74522 PAINTING STAND SET
This a multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting 1/24 scale model cars. The width of clips can also be adjusted to obtain the most stable hold. Both body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free.

269,-

KJØP
Hovedbilde Zap Blue Adhesives Thread Locker .20 oz
Zap Blue Adhesives Thread Locker .20 oz
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
Hovedbilde Zap PT-08 Adhesives Zap CA 1 oz
Zap PT-08 Adhesives Zap CA 1 oz
  This is a 1oz Bottle of Zap CA Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Super thin water-like consistency.           Superior penetrating formula.           Works on most materials.           Bonds and cures in 1-5 seconds.           Best for "tacking" applications. INCLUDES: One 1oz Bottle of Zap CA Glue. SPECS:    1oz (28.4g)

129,-

KJØP
Hovedbilde Tamiya 74017 Paint Stirrer (2)
Tamiya 74017 Paint Stirrer (2)
     This is a Package of Two Paint Stirrers from Tamiya. FEATURES: Stainless steel tool is designed for stirring bottled paints and for             blending different color shades.           One end is shaped like a small spoon, while the other is flat like             a spatula.           Carded packaging. INCLUDES: Two Metal Paint Stirrers. SPECS:    Length: 5.9" (15cm)

59,-

KJØP
Hovedbilde Tamiya 58441 Buggy Champ 2009 Hovedbilde Tamiya 58441 Buggy Champ 2009
Tamiya 58441 Buggy Champ 2009
The prominent figure of the R/C car boom was the Buggy Champ which was first released in 1979. Tamiya is now proud to re-release the Buggy Champ to celebrate the car's 30thyear anniversary. The chassis has been finely tuned while maintaining the original features of the chassis such as the unique front double trailing arms and rear torsion suspension.R/C fans' hearts will definitely race when they see the nostalgic form and relive the dynamic performance of this machine. Description The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. It keeps true to the basic layout of the original while incorporating modern improvements and features many refined parts that are reproduced with newly built metal moldings. The Buggy Champ also features a transparent mechanism box which protects the mechanics and battery and comes with grooved front and rear tires with block tread pattern. A realistic body is molded in white polystyrene and can be painted with plastic model paints. The Buggy Champ surely brings back the memories of the good old days when everyone was excited with its aggressive driving performance. About the Chassis: The chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and main battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss and mounted on the 3-piece center-lock wheels are grooved front tires and rear tires with block tread pattern that ensure superb off-road performance. • Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm • Tread: F170mm,　R175mm • Tire Width/Diameter: F19/74mm,　R35/83mm • Chassis: 2mm Thick FRP Plate with Reinforcing Aluminum Plate • Rear Wheel Drive • Weight: Approx. 1730g • Type 540 Motor included  • No Differential Gears • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle • 4 Oil Dampers • Gear Ratio=6.5:1 or 9.3:1 • Requires: 2-Channel radio, servo, esc, Battery pack & charger, and Tamiya TS paint. (Sold separately) Compatible Battery Spec Size: 96mm X 47mm X 25MM (Shorty Pack) Shorty Packs available by various battery manufacturers in the hobby industry offer “Shorty Pack” batteries that will fit in the chassis compartment. NOTE: The foam block included with the kit will need to be modified or changed to accommodate the “shorty pack”. Additionally, you will need to change the plugs on the included ESC to be compatible with “shorty pack” bullet connectors.  

3.995,-

4.795,-

KJØP
-17%
Hovedbilde Tamiya 74528 Alligator Clips (4) For Bottled Paint ...
Tamiya 74528 Alligator Clips (4) For Bottled Paint ...
2This is the Alligator Clips (4) from Tamiya.     FEATURES Handy clips for holding newly cemented or painted parts  Can be used with the Tamiya painting stand,  work stand or paint jar stand.   INCLUDES Four alligator clips  

79,-

KJØP
Hovedbilde Tamiya 87125 15 WELL PALETTE *5 Hovedbilde Tamiya 87125 15 WELL PALETTE *5
Tamiya 87125 15 WELL PALETTE *5
Palettes are handy for mixing paints. Metal palettes are useful, but they require cleaning with thinner after each use. This PET plastic palette can be disposed of after each use, thus allowing the modeller to save both time and money. About the Item Each palette plate has 15 wells, including 9 round (Dia.: 25mm The palette plate is 3mm thick and each section can be easily cut away with scissors. The palette can be cleaned with any Tamiya paint thinner except Item 87089 Tamiya Airbrush Cleaner (250ml). Related Items Tamiya Modeling Brush Basic Set (87066) Tamiya Modeling Brush HF Standard Set (87067) Paint Stirrer (2pcs.) (74017)

69,-

KJØP
Hovedbilde Tamiya 87124 Craft Tools Pipette Set (short & Long / ...
Tamiya 87124 Craft Tools Pipette Set (short & Long / ...
Tamiya Craft Tools Pipette Set (short & Long / 3pcs Each)

59,-

KJØP
Hovedbilde D-Max Connector XT90S Anti-Spark pair
D-Max Connector XT90S Anti-Spark pair
INFORMATION Patent Pending Design Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Anti-Spark Function Solder Joint Protection Covers Compatible with std XT-90 connectors Max load: 90-120A Size (together) : L: 29 (49) x W21 x H10 mm Weight: 15 g (pair) Connector Diameter: 4.5 mm Wire Max dia: 4.0 mm (10AWG) Wire insulation max diameter: 6.5 mm Package includes: 1 pair of XT-90S connectors & solder covers

99,-

KJØP
Hovedbilde Radient 010037 XT90 MALE INCLUDING HEAT SHRINK(ESC ...
Radient 010037 XT90 MALE INCLUDING HEAT SHRINK(ESC ...
XT90 MALE INCLUDING HEAT SHRINK (ESC END) (5PCS) MERKE Radient KONTAKT XT90

139,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png