Hopp til innhold

Traxxas 3159 Hex Screws 3x10mm (6)

Art.nr: TRX 3159

35,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are stock replacement screws for the Traxxas kit.


FEATURES: Steel construction
          Cap head with hexagon socket drive insert
          Metal lock washers


INCLUDES: (6) Screws
          (6) Lock Washers
          (1) Hex Wrench


SPECS:    Screws: Diameter: 3mm
                  Length: 10mm


          Lock Washers: Inner Diameter: 3mm
                        Outer Diameter:4mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 9491 Gear Adapter Set Drag Slash

69,-

KJØP
This is a set of TRAXXAS receiver tube caps and a spool that could be used for                          any receiver antenna tubes. FEATURES: Caps are yellow plastic.           Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps           One spool                     

25,-

KJØP
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

KJØP
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC og Velineon 3500 motor) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 4mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

1.995,-

2.395,-

Ikke på lager
-17%
Hatch, DCB M41, Hawaiian graphics (fully assembled)

605,-

KJØP
Propeller shaft/ flex cable, DCB M41 (380.9mm)

219,-

KJØP
This is the Rubber Boot for the Rudder Pushrod for the Traxxas Spartan. FEATURES: Rubber construction           Blue in color INCLUDES: One rubber boot and mount REQUIRES: Installation

29,-

KJØP
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
This is a Heavy Duty 6" Twisted Wire Y-Harness with Hitec-S, JR, Airtronics-Z Connectors. Features     Hitec 54703S 6" Heavy Gauge Twisted Wire Y Harness w/Pins     Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan     Heavier, 20-gauge wire handles higher current loads     Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference Specifications     Wire Gauge: 20     Wire Color Codes-     JR-                    Hitec-              Airtronics Z-     Brown: ground   Black: ground    Black: ground     Red: positive      Red: positive     Red: positive       Orange: signal    Yellow: signal    Blue: signal   Package Contents     One 6" Long Y-harness w/Hitec-S, JR, Airtronics-Z Style Connectors Requirements     N/A  

129,-

KJØP
Battery holder, 4-cell/ on-off switch

69,-

KJØP
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP
Savöx SW-0267MG - Micro Size Digital Servo, DC Motor, Waterproof, Metal Gears The SW-0267MG is a budget friendly, waterproof, high torque, digital micro servo. The wire enters vertically from the bottom of the case. This is a great upgrade if you're looking to drive your RC vehicle in any condition yet unable to use higher voltage to obtain more power. This is an excellent replacement for Traxxas 2065A/2065R/2065T. Features: 3-Pole Brushed Motor Fast Response Composite Case Ball Bearings Metal Gears Specs: Torque @ 4.8V: 5kg Torque @ 6V: 6kg Speed @ 4.8V: 0.16s/60° Speed @ 6V - 0.135s/60° Size: L22.6 x W12.6 x H23.5mm Weight: 14g

399,-

KJØP
Body Clip Retainer White 10 Clip 2 Retainer   En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger.

39,-

KJØP
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
  This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo. FEATURES: Black rubber construction   INCLUDES: One black coupler           One black exhaust deflector           Two 7" (178mm) zip ties           Two 3" (76mm) zip ties   REQUIRES: Installing between tuned pipe and exhaust header

49,-

KJØP
 This is the GTR Shock Rebuild Kit by Traxxas. FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons           Two blue rubber diaphragms           Four black plastic shock ends           Two piston lock nuts           Four metal X-rings COMMENTS: This set will rebuild two shocks

59,-

KJØP
Telemetry trigger magnet holder/ magnet 5x2mm (1)

35,-

KJØP
These are replacement motor screws and washers for any 05 size motor. Features: 6 3x8mm socket head screws           6 3mm washers           1 Hex allen wrench

39,-

KJØP
This is the Replacement 4X3MM Drive Dog for the Spartan from Traxxas FEATURES: Aluminum construction INCLUDES: Drive dog           4X3mm set screw REQUIRES: Installation on prop shaft

39,-

Ikke på lager
This is the Rudder Pushrod Assembly for the Spartan Boat from Traxxas FEATURES: Pre-assembled pushrod INCLUDES: Rudder pushrod           Servo horn           3x18mm BCS           (1)3x15mm CS           (1)3x6mm CS           (1) NL 3.0 REQUIRES: Installation on boat

59,-

KJØP
This is the Stuffing Tube with Nylon Liner for the Traxxas Spartan. FEATURES: Brass and nylon construction INCLUDES: One Assembled Stuffing Tube REQUIRES: Installation SPECS:    Length: 10.6" (270mm)           Outside Diameter of Stuffing Tube: 0.25" (6.6mm)           Inside Diameter of Nylon Liner:  0.18" (4.5mm)

159,-

179,-

KJØP
-11%
Bushings, self-lubricating (10) (marine drive system)

39,-

KJØP
Motor coupler, collet style/ GS 4x3 SS (with threadlock) (1)/ wrench, 10mm (2)

169,-

KJØP
Driveshaft coupler U-joint

49,-

KJØP
Motor drive cup/ set screw

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png