Hopp til innhold
-10%

Traxxas 9583X Output Cup Diff F/R HD Sledge

Art.nr: TRX 9583X

189,-

209,-

- 10%
Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Output Cup Diff F/R HD Sledge

Differential output cup, front or rear (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2)
Give your Sledge® the ultimate driveline upgrade with these hardened steel differential output cups. Built for maximum strength and durability, these heavy-duty output cups fit front or rear differentials and include 2.5x12 mm pins (2). Sold in pairs.

Accessory part for these models:

  • Sledge®

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 9583
Copied
Traxxas 9583 Output Cup Diff F/R Sledge Differential output cup, front or rear (hardened steel)/ 2.5x12mm pin

69,-

KJØP
Art.nr: TRX 95076-4-BLUE
Copied
Traxxas Sledge™ 1/8 Truck 6s - Blue Redefining 1/8 Scale Off-Road! Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. New Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Sledgehammer Tires Premium Sledgehammer® tires are standard equipment. No tire upgrade required. Durable foam inserts are designed to not bunch up or break down. Patent-pending Traxxas innovation improves the tire bonding process to reduce the chance of a blown-out bead while exploring the upper range of Sledge’s capability. What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. Specs: Length (including wing): 604mm Front Track: 459mm Rear Track: 459mm Ground Clearance: 50mm Weight (no battery): 5.77kg Height (overall): 214mm Wheelbase: 384mm Shock Length (front): 128mm Shock Length (rear): 144mm Tire Diameter: 170 x 84mm Wheel Diameter: 97mm (3.8") Speed Control: Velineon® VXL-6s (#3485) Motor (electric): Velineon® 2000kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347oz-in torque) Top Speed: 112+ KPH with two 3S LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45mm* Wide configuration (L/W/H): 160 x 57 x 29/37/45mm* *Using included optional foam spacer Spec. Car Type: Truck, Truggy Delivered as: RTR (Ready-To-Run) Drive: 4WD Operating Mode: Electric Scale: 1/8 Suitable For: Experienced, Expert Surface: Grass, Gravel Length: 604 mm Ground Clearence: 50 mm Height: 214 mm Weight: 5770 g Width: 459 mm ESC: Traxxas Velineon VXL-6s Top Speed: 112km/h Transmitter: Traxxas TQi 2-Channel Motor Type: Brushless Motor/Engine: Traxxas Velineon 2000kV Battery: Not Included Charger: Not Included Water Proof: Yes

9.995,-

KONTAKT
Art.nr: TRX 6553X
Copied
Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.

1.549,-

1.695,-

KJØP
-9%
Art.nr: TRX 9690
Copied
Traxxas 9690 High-Output Off-Road LED Light Kit for Sledge Dual Front and Single Rear LED Light bars Sealed waterproof design Functional Brake and Reverse Lights Three Lighting Modes: Daytime, Low-beam, and High-beam High-Voltage Power Amplifier Controllable Through the Traxxas Link App* Sledge® was built to a new level of precision and toughness to create a unique driving experience. The new High-Output Light Kit extends your fun with a front light bar and bumper lights to illuminate the path ahead. A rear light bar with functional brake and reverse lights allows you to track Sledge’s progress from behind. Sledge’s rugged roof skid protects the light bars against impacts with fully waterproof construction for worry-free performance.

1.195,-

1.295,-

KJØP
-8%
Art.nr: TRX 2255
Copied
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Art.nr: TRX 9532R
Copied
Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

KJØP
-8%
Art.nr: TRX 9532X
Copied
Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

KJØP
-8%
Art.nr: TRX 9532G
Copied
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

KJØP
-8%
Art.nr: TRX 9532A
Copied
aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

KJØP
-8%

Kunder kjøpte også

Traxxas 9541 Suspension Pins Inner F+R 4x67mm (2) Sledge Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

59,-

KJØP
Traxxas 9510G Body Reinforcement & Roof Skidpads Green Sledge Body reinforcement set, green/ skid pads (roof) (fits #9511 body)

109,-

KJØP
Traxxas 9511A  Body Sledge Green Complete w/ Supports & Mounts Body, Sledge™, green/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/8 Painted: Yes

799,-

899,-

KJØP
-11%
Traxxas 9510X Body Reinforcement & Roof Skidpads Blue Sledge Body reinforcement set, blue/ skid pads (roof) (fits #9511 body)

109,-

KJØP
Traxxas 9517 Wing Green Sledge Wing (green)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Traxxas 9519X Mud Guards Rear Blue (L+R) Sledge Mud guards, rear, blue (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)

75,-

KJØP
Traxxas 9519G Mud Guards Rear Green (L+R) Sledge Mud guards, rear, green (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)

75,-

KJØP
Traxxas 9579R Ring Gear and Pinion (Machined) Sledge Ring gear, differential/ pinion gear, differential (machined) (front or rear)

649,-

KJØP
Traxxas 9662T Shock Shafts TiN-Coated 80mm GT-Maxx (2) Shock shaft, 80mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)

269,-

KJØP
Traxxas 9617A Wing washer, 6061-T6 aluminum (dark-titanium anodized) (1)/ 4x12mm FCS (2) Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2) Accessory part for these models: Sledge®

179,-

KJØP
Traxxas 9652X - Spur gear, 52-tooth, machined steel (1.0 metric pitch) Designed for power-hungry drivers who push their Sledge® to the extreme, the heavy-duty 52-tooth Mod 1 (1.0-metric pitch) spur gear is machined from hardened steel for extra-long life. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

449,-

469,-

KJØP
-4%
Traxxas 9557X Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts) Accessory part for these models: Sledge®

199,-

KJØP
Traxxas 9556X Driveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts) Accessory part for these models: Sledge®

199,-

KJØP
Traxxas 9582 Output Gears Differential Sledge Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shafts (2)/ spacers (4))

199,-

KJØP
Traxxas 9554X Stub axles, hardened steel (2) (for use only with #9557 driveshaft) Accessory part for these models: Sledge®

249,-

KJØP
Traxxas 9680 O-rings (6) O-rings (6) Set of six O-rings for use with Sledge® rear driveshafts

29,-

39,-

KJØP
-26%
Traxxas 9573 Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2) Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. Sledgehammer tires come pre-mounted to 3.8″ black Sledge wheels with an ultra-tough glue bead for the most extreme high-speed off-road action. Fits 17 mm splined hex, front or rear.

929,-

999,-

KJØP
-7%
Traxxas 9623P Skidplate, chassis, grey (fits Sledge®) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty skid plate aligns perfectly with the existing mounting holes for a perfect factory fit. Longer attachment screws come in the kit and must be used when mounting the skid plate to the chassis. Accessory part for these models: Sledge

199,-

KJØP
Traxxas 9529 Bulkhead Front/Rear Sledge Bulkhead, front or rear

159,-

179,-

KJØP
-11%
Traxxas 9519 Mud Guards Rear Black (L+R) Sledge Mud guards, rear, black (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)

69,-

KJØP
Traxxas 9517 Wing Black Sledge Wing (black)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Traxxas Differential Gasket Set E-Revo 2, Sledge Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)  

49,-

KJØP
Wing Mount Sledge

79,-

KJØP
Traxxas 9536 Bumper & Skidplate Set Rear Sledge Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3x25 CS (2)

109,-

KJØP
  Description: This is Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor. 1200KV   Feature: For: Traxxas X-Maxx Material: Metal Color: Black Traxxas 6.5mm bullet connectors   Include: Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor (1 pc)

2.695,-

2.895,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png